No. | Brand | C | K | A | T | a | G | h | b |
6006ZZ | NSK | - | - | - | - | 22.1 mm | - | - | - |
15x24x5 | - | - | - | - | - | - | - | - | - |
15-15-15/Export | - | - | - | - | - | - | - | - | - |
C4122V/C3 | SKF | - | - | - | - | 22.8 mm | - | - | - |
AS206 | NSK | - | - | - | - | - | - | - | - |
3008-2rs | INA | - | - | - | - | - | - | 73.025 mm | - |
99.5% | INA | - | - | - | - | - | - | - | - |
PC200-8 | - | - | - | - | 36.512 mm | - | - | - | - |
R6ZZST | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
SZK2044 | - | - | 3 mm | - | - | - | - | - | - |
20 | - | - | - | - | - | - | - | - | - |
285A | - | - | - | - | - | - | - | - | - |
2mm-25mm | - | - | - | - | - | - | - | - | - |
95% | - | - | - | - | - | - | - | - | - |
PC200-7 | - | - | - | - | - | - | - | - | - |
(JZ-T102) | - | - | - | - | - | - | - | - | - |
7306 | - | - | 9 mm | - | - | - | - | - | 16.7 mm |
Fe6- | - | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
688zz | INA | - | - | - | - | - | - | - | - |
1.8Ton | - | 24 mm | - | - | 29.75 mm | 25 mm | - | - | - |
5022 | - | 83 mm | - | - | - | - | - | - | - |
0.8mm | - | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
15 mm x 42 mm x 13 mm 024.30.900 Slewing Bearing | da:61.913 mm; Limiting speed:3800 r/min; J max.:222.25 mm; H1:69.85 mm; Mass bearing unit:8.39 kg; Attachment bolt diameter G:15.875 mm; s:29.766 mm; H:144.463 mm; A:73.025 mm; S:0.794 mm; Size (mm):15 mm x 42 mm x 13 mm ; |
RK6-25E1Z Slewing Bearings (21.03x29.15x2.205inch) With External Gear | D2:67.12 mm; Calculation factor f2A:1; Basic static load rating C0:9.8 kN; r3,4 min.:0.3 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; d2:57.1 mm; Calculation factor f2B:1.07; Calculation factor f2C:1.12; Static axial stiffness, preload class B:152 N/µm; a:20.3 mm; |
XU050077 Slewing Bearing | Fillet Radius ra:0.64 mm; Accessories:One Seal; d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; D:26.0000 mm; B:8.00 mm; Basic Static Radial Load Rating Co:1960 N; Grease Speed Rating Open/Shielded n1:28000 rpm; Sealed Speed Rating n3:20000 rpm; Basic Dynamic Radial Load Rating C:4620 N; |
NRXT50050DD Crossed Roller Bearing 500x625x50mm | Basic dynamic load rating C:81.9 kN; C:11 mm; R:72 mm; Da max.:72 mm; H1:37 mm; D1 ≈:52 mm; s:28 mm; da min.:77 mm; Reference speed:2400 r/min; Mass bearing (including seat washer where applicable):1.2 kg; |
792/1000G2 Bearing 1000x1270x100mm | Accessories:No Shield, no Seal; B:57.20 mm; Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Sealed Speed Rating n3:3400 rpm; d:60.000 mm; D:130.0000 mm; Basic Static Radial Load Rating Co:95000 N; Oil Speed Rating n2:4500 rpm; |
RE 9016 Crossed Roller Bearing 90x130x16mm | J7:15.5 mm; H:93 mm; B1:51.1 mm; s1:32.3 mm; J max.:133 mm; Basic static load rating C0:15.3 kN; H1:47.6 mm; Housing:SY 507 M/VZ033; Basic dynamic load rating C:25.5 kN; Recommended diameter for attachment bolts, mm G:12 mm; |
Slewing Ring For Excavator KOBELCO SK200LC III, Part Number:24100N7440F1 | Rα:45 °; DN:6.579 mm; H2:33 mm; Housing:SY 515 U; A1:48 mm; H:166 mm; N:35 mm; Bearing:YAR 215-215-2F; L:279 mm; B4:12 mm; |
012.75.4000 Slewing Bearing | da:96.838 mm; P180°:84.5 kN; H:287.337 mm; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.875 in; Taconite seal:TER 107; PG:1/4 NPT; Housing:SAF 622; J max.:406.4 mm; Max. speed for Taconite seal:775 r/min; |
DH300-5 Slewing Bearing | Mass needle roller and cage assembly:0.0007 kg; U:8 mm; Ew:8 mm; Fw:5 mm; Reference speed:36000 r/min; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:2 kN; Limiting speed:40000 r/min; Fatigue load limit Pu:0.212 kN; |
R8-35N3 Crossed Roller Slewing Rings With Internal Gear |
3R8-59N2E Three Row Roller, Heavy-duty Slewing Ring With Internal Gear Video