No. | Brand | C | K | A | T | a | G | h | b |
(ZH3938) | - | - | - | - | - | - | - | - | - |
N322 | NSK | - | - | - | - | - | - | - | - |
070M | SKF | - | - | - | - | - | - | - | - |
DM2 | - | - | - | - | - | - | - | - | - |
28-30% | - | - | - | - | - | - | - | - | - |
2K | - | - | - | - | - | - | - | - | - |
tc1730 | - | - | - | - | - | - | - | - | - |
511 | - | - | - | - | - | - | - | - | - |
686ZZ | NSK | - | - | - | - | - | - | - | - |
163-6703 | - | - | - | - | - | - | - | - | - |
3/4" | - | - | - | - | - | - | - | - | - |
51106 | - | - | - | - | - | - | - | - | - |
350 | NTN | - | - | - | - | - | - | - | - |
7782-63-0 | - | - | - | - | - | - | - | - | - |
14180 | - | 53 mm | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | - | - |
ISO9001-2008 | - | - | - | - | - | - | M 50x1.5 | 2.5 mm | 6 mm |
CR807HPN | - | - | - | - | - | - | Tr 710x7 | - | - |
R145LCR | - | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
5x11x3 | - | - | - | - | - | 20 mm | - | - | - |
SH430 Slewing Bearing | da:38.1 mm; L:158.75 mm; A6:19.05 mm; Limiting speed:1700 r/min; B:69.85 mm; N1:14.287 mm; S:0.794 mm; Mass bearing unit:3.81 kg; A1:71.438 mm; d2:62.706 mm; |
023.25.560 Slewing Bearing | Basic Static Radial Load Rating Co:6700 N; Grease Speed Rating Open/Shielded n1:14000 rpm; D:52.0000 mm; d:25.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:17000 rpm; B:9.00 mm; Basic Dynamic Radial Load Rating C:12100 N; |
1.181 Inch | 30 Millimeter x 1.457 Inch | 37 Millimeter x 1.496 Inch | 38 Millimeter 1797/3230G Bearing 3230x4100x240mm | l1 min.:86 mm; Material constant KM:330; Basic dynamic load rating C:100 kN; Specific dynamic load factor K:100 N/mm²; l2 max.:199 mm; B:28 mm; C1 max.:24 mm; d2 max.:94 mm; l7 min.:46 mm; r1 min.:0.6 mm; Size (mm):1.181 Inch | 30 Millimeter x 1.457 Inch | 37 Millimeter x 1.496 Inch | 38 Millimeter ; |
R8-52N3 Crossed Roller Slewing Rings With Internal Gear | rs (min):2.1 mm; Grease:1980 kN; d:160 mm; B:109 mm; Oil:191.920 kN; Dynamic (Cr):4.5 mm; Pu:1120 kN; Static (Cor):8.3 mm; with tapered bore:900 min-1; D:270 mm; |
SX011868 Cross Roller Bearing 340x420x38mm | d:28 mm; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; α:124 °; B:35 mm; Tolerance housing:H7; Tolerance shaft:e7; h:29 mm; a:3 mm; Permissible sliding velocity v max.:0.5 m/s; |
797/1320G2 Slewing Bearing | H1:88.9 mm; RG:3/8 NPT; Stabilizing ring:2 x SR-1516; Labyrinth ring (dc shaft position):LOR 54; N1:19.05 mm; Max. speed for PosiTrac Plus seal:1450 r/min; R1:53.181 mm; PosiTrac Plus contact element (dc shaft position):B10724-53; Cap bolt, SAE grade:5; Labyrinth ring (db shaft position):LOR 82; |
123.28.1120 Slewing Bearing | T:98 mm; D:150 mm; r3,4 min.:2 mm; ra max.:2 mm; r5 min.:0.6 mm; Basic dynamic load rating C:606 kN; b:10 mm; Ca min.:7 mm; Calculation factor Y0:1.6; Basic static load rating C0:850 kN; |
022.25.710 Slewing Bearing | D:40.0000 mm; Grease Speed Rating n1:10000 rpm; Sealed Speed Rating n3:10000 rpm; Basic Static Radial Load Rating Co:8800 N; D2R:38.1 mm; Accessories:One Shield & Snap-Ri; d:17.000 mm; Basic Dynamic Radial Load Rating C:14300 N; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:15000 rpm; |
VLI200644N Flange Slewing Ring 546x748x56mm | D1 ≈:534 mm; Reference speed:530 r/min; H:85 mm; d:530 mm; D:640 mm; Da max.:575 mm; d1 ≈:636 mm; Limiting speed:750 r/min; ra max.:2.5 mm; Mass bearing (including seat washer where applicable):58.5 kg; |
RE 13015 UU Crossed Roller Bearing 130x160x15mm | Accessories:No Shield, no Seal; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:200000 N; Grease Speed Rating n1:1600 rpm; Basic Dynamic Radial Load Rating C:203000 N; D:200.0000 mm; Fillet Radius ra:2.00 mm; d:110.000 mm; B:69.80 mm; Sealed Speed Rating n3:1600 rpm; |
NRXT4010DD/ Crossed Roller Bearings (40x65x10mm) Industrial Robots Bearing Video