| No. | Brand | C | K | A | T | a | G | h | b |
| 2-11/16" | FAFNIR | - | - | - | - | - | - | - | - |
| 2 | INA | - | - | - | - | - | - | - | - |
| 1210 | - | - | - | 300 mm | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| CK9867 | - | - | - | - | - | - | - | - | - |
| (9mm/12mm/15mm/17mm/18mm/21mm) | - | - | - | - | - | - | - | - | - |
| 6203LLU | NTN | - | - | - | - | - | - | - | - |
| DH55 | INA | - | - | - | - | - | M 36x3 | 130 mm | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 1216 | NSK | - | - | - | - | - | - | - | - |
| 6208Z | koyo | - | - | 39 mm | - | - | - | - | - |
| AP2D25,Piston | Rexroth | - | - | - | - | - | - | - | - |
| 8-94140341-0 | - | - | - | - | - | - | - | 54.769 mm | - |
| (4 | - | - | - | - | - | - | - | - | - |
| (NNU3028) | - | - | - | - | - | - | - | - | - |
| DX225LCA | - | - | - | - | - | - | - | - | - |
| PS4134P | Parker | - | - | - | - | - | - | - | - |
| NJ230-E-M1 | fag | - | - | - | - | - | - | - | - |
| 6014 | NSK | - | - | - | - | - | - | - | - |
| XKAQ-00803 | - | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| 6306C3 | NSK | - | - | - | - | - | - | - | - |
| SX011820 Cross Roller Bearing 100x125x13mm | D:100.0000 mm; Basic Dynamic Radial Load Rating C:80900 N; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:80000 N; d:45.000 mm; Sealed Speed Rating n3:4500 rpm; B:42.90 mm; Oil Speed Rating n2:6000 rpm; Accessories:Two Shields; |
| R8-30E3 Crossed Roller Slewing Rings With External Gear | Ca:147.803 mm; S:4.763 mm; H:495.3 mm; P180°:267 kN; Cap bolt recommended tightening torque:4284.4 N·m; Mass pillow block:441 kg; Cap bolt, SAE grade:8; Initial grease fill:3515.4 g; Max. speed for PosiTrac Plus seal:800 r/min; End plug (suffix Y):EPR 21; |
| CRB20025UU High Precision Cross Roller Ring Bearing | C2:1.95 mm; Static axial stiffness, preload class C:153 N/µm; Preload class C GC:480 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (single, tandem) Y2:0.87; r3,4 min.:0.6 mm; Calculation factor f2B:1.03; Static axial stiffness, preload class B:117 N/µm; B:13 mm; Ball diameter Dw:6.35 mm; |
| XR736052 Crossed Roller Bearing 432.03x571.5x38.1mm | H:157.162 mm; Initial grease fill:136.08 g; RG:1/4 NPT; P60°:43.1 kN; N1:19.05 mm; Max. speed for Taconite seal:1575 r/min; R2:25.4 mm; L:279.4 mm; P180°:17.8 kN; Pa:4.8 kN; |
| SX011814 Cross Roller Bearing 70x90x10mm | d:60 mm; das:68.9 mm; Reference speed:3400 r/min; ra max.:1 mm; Fatigue load limit Pu:36.5 kN; d1 ≈:71.5 mm; rb max.:0.5 mm; s max.:1.5 mm; Calculation factor kr:0.5; r1,2 min.:1.1 mm; |
| KLK 950L Four Point Contact Ball Slewing Turntable Bearing | |
| 122.32.1400 Slewing Bearing | Basic Interchange NDH:88009; d:9.000 mm; Basic Interchange FAF:-; Basic Radial Load Rating-Static SCO:2040 N; Width - Inner Ring B1:16.40 mm; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Fillet Radius ra:0.64 mm; Old MRC Bearing Number:-; Width - Overall B:16.4 mm; Basic Interchange BCA:-; |
| RB7013UUC0 High Precision Cross Roller Ring Bearing | D:63 mm; d:38 mm; db min.:50.5 mm; C:13.5 mm; Cb min.:3.5 mm; Limiting speed:10000 r/min; Calculation factor e:0.43; da max.:44 mm; Mass bearing:0.2 kg; rb max.:1.3 mm; |
| RB25040 Precision Cross Roller Bearing | D:110.0000 mm; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:4300 rpm; Basic Dynamic Radial Load Rating C:78100 N; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3800 rpm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:88000 N; B:38.10 mm; d:60.000 mm; |
| 65 mm x 140 mm x 33 mm SX0118/500 Cross Roller Bearing 500x620x56mm | Accessories:Shield & Seal; Basic Static Radial Load Rating Co:6550 N; Grease Speed Rating Open/Shielded n1:16000 rpm; D:47.0000 mm; Oil Speed Rating n2:19000 rpm; d:17.000 mm; Sealed Speed Rating n3:11000 rpm; Oil Speed Rating Open/Shielded n2:19000 rpm; B:14.00 mm; Grease Speed Rating n1:16000 rpm; Size (mm):65 mm x 140 mm x 33 mm ; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
NRXT8013DD/ Crossed Roller Bearings (80x110x13mm) Industrial Robots Bearing Video