| No. | Brand | C | K | A | T | a | G | h | b |
| NJ218 | NSK | - | - | - | - | - | - | - | - |
| NX15 | - | - | - | - | - | - | - | - | 4 mm |
| 78" | - | - | - | - | - | - | - | 42.862 mm | - |
| 32907JR-3 | koyo | - | - | - | - | - | - | - | - |
| 14-17 | - | - | - | - | - | 131 mm | - | - | 6.5 mm |
| pc200-6 | INA | - | - | - | - | - | - | - | - |
| IR8407 | RBC | - | - | - | - | - | - | - | - |
| AP2D25,Piston | Rexroth | - | - | - | - | - | - | - | - |
| 20"x10"x12" | - | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
| 500mg/H | - | - | - | - | - | - | - | - | 16.7 mm |
| AA10VSO45DFR1/31R-PKC62K02 | Rexroth | - | - | - | - | - | - | - | - |
| NMRV63 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| F-555102.01 | - | - | - | - | - | - | - | - | - |
| 400x600x200 | - | - | - | - | - | - | - | - | - |
| 9168173 | - | - | - | - | - | - | - | - | - |
| 23236-E1-K-TVPB | - | - | - | - | - | - | 459.003 mm | - | - |
| SPB24OPN | Thomson | - | - | - | - | - | - | - | - |
| NU308E | - | - | - | - | - | - | - | - | - |
| SS304 | - | - | - | - | - | - | M 24x2 | - | - |
| MTO-170T Heavy Duty Slewing Ring Bearing | Accessories:Seal & Snap-Ring; Sealed Speed Rating n3:5000 rpm; B:16.00 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:24700 N; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:18000 N; D:80.0000 mm; d:50.000 mm; Fillet Radius ra:1.00 mm; |
| Slewing Ring For Excavator KOBELCO SK350-8, Part Number:LC40F00018F1 | Q150°:2400 kN; Cap bolt, size:M 36x240; Locating ring:2 x FRB 10/620; Mass housing:470 kg; H:715 mm; N4 max.:30 mm; Oil level, max.:110 mm; Bearing (basic designation):C 3176 K; Oil seal:2 x TSD 3176 U; Q120°:4200 kN; |
| 230.20.0700.013 Four Contact Ball Slewing Ring 634x848x56mm | d:160.000 mm; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1800 rpm; D:340.0000 mm; Basic Static Radial Load Rating Co:530000 N; Basic Dynamic Radial Load Rating C:423000 N; Oil Speed Rating n2:2200 rpm; B:68.00 mm; |
| RKS.060.25.1204 Slewing Bearing Without Gear 1119x1289x68mm | r1,2 min.:1.1 mm; da min.:90 mm; s:41 mm; d:60 mm; Mass bearing (including seat washer where applicable):1.71 kg; Limiting speed:3000 r/min; Basic dynamic load rating C:101 kN; D2:85 mm; H1:42 mm; H:38.3 mm; |
| Cross Roller Bearings Harmonic Drive Bearings BCSF-65 (44x210x39)mm | Basic Dynamic Radial Load Rating C:47500 N; B:18.00 mm; Basic Static Radial Load Rating Co:52000 N; Fillet Radius rb:0.60 mm; d:95.000 mm; D:130.0000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:5600 rpm; Grease Speed Rating n1:4800 rpm; |
| 232.20.1000.013 Four Contact Ball Slewing Ring 986x1198x56mm | Mass withdrawal sleeve:265 kg; G1:50 mm; d:850 mm; Hydraulic nut:HMV 180 E; d1:800 mm; B1:415 mm; G2:G 1/4; B2:445 mm; Nut for removal:HM 31/900; G:Tr 900x7; |
| A12-47N3E Four Point Contact Ball Slewing Bearing With Inernal Gear | d:25 mm; F:30 mm; r, r1,2 min.:0.3 mm; B:38.5 mm; Mass inner ring:0.065 kg; |
| XSA140944-N Crossed Roller Bearings 874x1046.1x56mm | B:156.00 mm; d:190.000 mm; Basic Dynamic Radial Load Rating C:761000 N; Grease Speed Rating n1:1300 rpm; D:400.0000 mm; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:1290000 N; Fillet Radius ra:4.00 mm; Oil Speed Rating n2:1700 rpm; |
| RE13015 Crossed Roller Bearings 130x160x15mm | J1:100 mm; P55°:2100 kN; s:14 mm; P90°:1000 kN; Cap bolt, rec. tightening torque:350 N·m; Bearing (basic designation):C 3036 K; J:430 mm; ba min.:72 mm; Oil level, min.:47 mm; bc:107.5 mm; |
| 3R6-55N9 Three Row Roller, Heavy-duty Slewing Ring With Internal Gear | RG:1/2 NPT; J min.:371.475 mm; Ca:73.787 mm; ba:57.944 mm; H2:60.325 mm; P60°:189 kN; S:4.763 mm; N1:25.4 mm; P180°:84.5 kN; P120°:73.8 kN; |
NRXT14025 E/ Crossed Roller Bearings (140x200x25mm) Video