| RE 25040 UU Crossed Roller Bearing 250x355x40mm | d1:530 mm; G:Tr 600x6; G2:G 1/4; B1:296 mm; B2:320 mm; Mass withdrawal sleeve:79.5 kg; d:560 mm; G1:38 mm; Nut for removal:HM 31/600; A:9 mm; |
| 282.30.1375.013 Four Contact Ball Slewing Ring 1212x1498x90mm | Minimum load factor A:910; H:140 mm; Reference speed:260 r/min; Fatigue load limit Pu:150 kN; Basic static load rating C0:13200 kN; Mass bearing (including seat washer where applicable):275 kg; D:1180 mm; d:1000 mm; ra max.:4 mm; da min.:1106 mm; |
| RB60040 Cross Roller Bearings 600*700*40mm | H2:85.725 mm; J1:127 mm; H1:209.55 mm; RG:1 NPT; Ca:129.794 mm; End plug (suffix Y):EPR 19; dc:163.512 mm; PG:1/4 NPT; Pa:93.9 kN; P180°:145 kN; |
| 227-6052 Swing Bearing For Caterpillar 345CL Excavator | Pu:1.409 kN; rs:1.5 mm; Static (Cor):31.000 kN; Grease:7 500 min-1; Weight:0.954 kg; B:25 mm; ra:1.5 max; Oil:8 900 min-1; Bearing designation:6407 ; Da:90 max; |
| 022.25.560 Slewing Bearing | Mass bearing:768 kg; Fatigue load limit Pu:2120 kN; T:600 mm; Calculation factor e:0.33; r3,4 min.:6 mm; r1,2 min.:3 mm; Calculation factor Y1:2; Basic static load rating C0:31000 kN; D1 ≈:756 mm; B:600 mm; |
| 282.30.1275.013 Four Contact Ball Slewing Ring 1112x1398x90mm | Basic Dynamic Radial Load Rating C:101000 N; Accessories:No Shield, no Seal; B:39.70 mm; D:125.0000 mm; Basic Static Radial Load Rating Co:125000 N; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; d:70.000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3200 rpm; |
| CRBS508AUUT1 High Precision Cross Roller Bearing | A1:120.65 mm; P150°:87.2 kN; P90°:149 kN; da:103.188 mm; Initial grease fill:379.89 g; Max. speed for Taconite seal:725 r/min; Housing:SSAFS 524; Mass pillow block:64 kg; h:46.831 mm; Cap bolt, SAE grade:8; |
| RB60040UUC0 High Precision Cross Roller Ring Bearing | B:82.55 mm; Static (Coa):981 kN; rs (min):4 mm; F:168 mm; r1s (min):4 mm; Dynamic (Ca):596 kN; s:10 mm; b:mm; D:250 mm; Pu:97.910 kN; |
| RB20030 Cross Roller Ring 200x280x30mm | Db max.:473 mm; D:480 mm; Calculation factor kr:0.1; Mass bearing:19.5 kg; s max.:3.5 mm; B:46 mm; d1 ≈:416 mm; Calculation factor e:0.2; Da max.:469 mm; d:380 mm; |
| 1797/1916G2 Slewing Beairng | da:80.963 mm; P150°:34.7 kN; Ca:62.23 mm; P60°:101 kN; End plug (suffix Y):EPR 11; P120°:38.3 kN; S:4.763 mm; Initial grease fill:141.75 g; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; |