No. | Brand | C | K | A | T | a | G | h | b |
A6VM140 | Rexroth | - | - | - | - | - | - | - | - |
ABEC-7 | - | - | - | - | - | - | - | - | - |
17Pcs | - | - | - | - | - | - | - | - | - |
st4090 | - | - | - | - | - | - | - | - | - |
P11 | - | - | - | - | - | - | - | - | - |
zeta4 | Parker | - | - | - | - | - | - | - | - |
450 | - | - | - | - | - | - | - | - | - |
2 | - | - | - | 114.3 mm | - | - | - | - | - |
5000FE | - | - | - | - | - | - | - | - | - |
4X8 | INA | - | - | - | - | - | - | - | - |
CO2 | - | - | - | - | - | - | - | - | - |
1986-1990 | Timken | - | - | - | - | - | - | - | - |
TM40 | INA | - | - | - | - | - | - | - | - |
K3V180 | INA | - | - | - | - | - | - | - | - |
8-94140341-0 | - | - | - | - | - | - | - | 54.769 mm | - |
02-20-2515 | - | - | - | - | - | - | - | - | 9 mm |
27881 | Timken | - | - | - | - | - | - | - | - |
SDA16 | - | - | - | - | - | - | - | - | - |
N8D | - | - | - | - | - | - | - | - | - |
729436-51360 | - | - | - | - | - | - | - | - | - |
15mm | - | - | - | - | - | - | - | - | - |
RU195 | - | - | - | - | - | - | - | - | - |
MOT-FC-EV2 | Rexroth | - | 7.5 mm | - | - | - | M 120x2 | - | 13.9 mm |
NTX350 | - | 250 mm | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | - | - | - |
RU178X Cross Roller Bearing 115x240x28mm | Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:156000 N; Grease Speed Rating n1:2800 rpm; d:65.000 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:195000 N; Oil Speed Rating n2:3800 rpm; B:71.40 mm; |
XR882055 Cross Tapered Roller Bearing 901.7x1117.6x82.555mm | da min.:686 mm; B2 ≈:294 mm; Limiting speed:600 r/min; D:980 mm; Calculation factor Y1:3.2; ra max.:6 mm; Mass bearing + sleeve:720 kg; b:22.3 mm; Calculation factor Y2:4.8; Calculation factor Y0:3.2; |
Excavator Slewing Ring For KOMATSU PC200LC-6L, Part Number:20Y-25-21100 | Limiting speed:3200 r/min; Basic static load rating C0:15.3 kN; Thread grub screw G2:5/16-24 UNF; A:35.7 mm; A1:14.3 mm; Hexagonal key size for grub screw N:3.969 mm; s1:25.4 mm; Recommended diameter for attachment bolts, mm G:12 mm; Basic dynamic load rating C:21.6 kN; Db2:92.1 mm; |
XSA140744-N Cross Roller Bearing Manufacturer 674x838.1x56mm | d:950 mm; Mass bearing:250 kg; D1:956 mm; ra max.:4 mm; B:40.5 mm; D:1120 mm; r1,2 min.:5 mm; Da max.:981 mm; Basic dynamic load rating C:4400 kN; d1:1114 mm; |
RB45025UUCC0 High Precision Cross Roller Ring Bearing | Pa:8.1 kN; P90°:72.5 kN; H2:41.275 mm; End plug (suffix Y):EPR 11; Mass pillow block:21.3 kg; Initial grease fill:286.33 g; Stabilizing ring:2 x SR-1518; R1:60.325 mm; Labyrinth ring:2 x LOR 188; Cap bolt, SAE grade:5; |
RB18025 Cross Roller Bearing 180x240x25mm | Da max.:73 mm; Reference speed:8000 r/min; Basic static load rating C0:90 kN; Calculation factor e:0.28; b:6 mm; Calculation factor Y2:3.6; d1:35 mm; B2 ≈:32 mm; G:M 45x1.5; D1 ≈:69.4 mm; |
111.28.900 Slewing Bearing | da min.:211 mm; B:80 mm; Mass bearing:15.6 kg; ra max.:2 mm; Reference speed:1000 r/min; D:280 mm; Fatigue load limit Pu:153 kN; Basic static load rating C0:1500 kN; r1,2 min.:2.1 mm; Calculation factor kr:0.25; |
45 mm x 85 mm x 19 mm L9-49N9Z Four-point Contact Ball Slewing Rings With Internal Gear | α:20 °; Basic dynamic load rating C:5720 kN; Fatigue load limit Pu:1180 kN; C:400 mm; r3,4 min.:2 mm; b:11.1 mm; r1,2 min.:10 mm; D1 ≈:488.7 mm; K:6 mm; Size (mm):45 mm x 85 mm x 19 mm ; |
R210-3 Bearings | ra max.:0.3 mm; Mass bearing:0.11 kg; db:34.5 mm; Db:35.6 mm; B:16 mm; Limiting speed:13000 r/min; E:42 mm; Basic dynamic load rating C:23.3 kN; Reference speed:11000 r/min; d:30 mm; |
RA8008 Crossed Roller Bearings 80x96x8mm | Ca:42.799 mm; Da:140 mm; Cap bolt recommended tightening torque:149.1 N·m; P150°:26.7 kN; P90°:49.8 kN; Max. speed for PosiTrac Plus seal:2150 r/min; Labyrinth ring:2 x LOR 45; N1:22.225 mm; PG:1/8 NPT; A1:88.9 mm; |
YRT180 Rotary Table Bearing 180x280x43mm Video