| 17972500G2K5 Bearing 2500x3250x210mm | Recommended tightening torque for grub screw:4 N·m; A5:20.5 mm; End cover:ECY 205; A:30 mm; d:23.812 mm; Limiting speed:7000 r/min; Housing:FYTB 505 M; Db1:65 mm; GN:1/4-28 SAE-LT; Bearing:YAR 205-015-2F; |
| 024.60.3150 Slewing Bearing | Tolerance housing:H7; a:5 mm; D:180 mm; Coefficient of friction µ max.:0.15; B1:10 mm; Coefficient of friction µ min.:0.08; B:100 mm; d:160 mm; α:124 °; Specific dynamic load factor K:25 N/mm²; |
| 014.40.800 Slewing Bearing | Basic static load rating C0:1630 kN; Mass bearing:28.6 kg; Calculation factor Y:1.4; Da max.:293.5 mm; db min.:189.5 mm; r3,4 min.:4 mm; ra max.:5 mm; da max.:196 mm; D:310 mm; Basic dynamic load rating C:1075 kN; |
| RB60040UU High Precision Cross Roller Ring Bearing | D:95 mm; Preload class B GB:440 N; Number of balls z:25; Calculation factor fHC:1.01; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; Mass bearing:0.4 kg; Basic dynamic load rating C:16.3 kN; Da max.:89 mm; Static axial stiffness, preload class A:135 N/µm; |
| RKS.22 0411 Light Series Four-point Contact Ball Slewing Bearing With Internal Gear | Shaft washer:WS 81222; Eb:152 mm; Basic static load rating C0:1000 kN; Fatigue load limit Pu:98 kN; Dw:15 mm; Housing washer:GS 81222; D:160 mm; Ea:117 mm; Reference speed:850 r/min; Mass roller and cage thrust assembly:0.53 kg; |
| PC220-7(92T) Slewing Bearing | da min.:44 mm; Standard grease:GXN; r3,4 min.:1 mm; d1 ≈:52.5 mm; a:35 mm; Db max.:74.4 mm; Basic static load rating C0:24.5 kN; Calculation factor Y0:0.26; B:21 mm; Calculation factor X:0.57; |
| 209-25-11101 Swing Bearing For Komatsu PC650SE-3 Excavator | d2 max.:137 mm; α:6 °; r1 min.:1 mm; Basic dynamic load rating C:245 kN; Mass rod end:5.7 kg; Specific dynamic load factor K:100 N/mm²; G:M 52x3; d:60 mm; h:210 mm; l7 min.:73 mm; |
| 133.50.4500 Slewing Bearing | d2:74.9 mm; da min.:71 mm; ra max.:1 mm; Da max.:94 mm; Calculation factor e:0.68; Preload class C GC:1040 N; Calculation factor f2C:1.06; Preload class A GA:170 N; Basic dynamic load rating C:19.5 kN; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| VSA200644N Slewing Bearings (572x742.3x56mm) Turntable Bearing | Ca min.:0.1 mm; d2 ≈:44.8 mm; Da min.:58.5 mm; Operating clearance factor k2:0.121; ra max.:1 mm; Da max.:65 mm; D:72 mm; B1:35 mm; da max.:44.8 mm; Ba min.:5 mm; |
| 020.40.1400 Slewing Bearing | d2 max.:100 mm; Tightening torque bolt with internal hexagon:45 N·m; Mass rod end:2.4 kg; h1:105 mm; l7 min.:45 mm; l4 max.:155 mm; Material constant KM:330; N max.:90 mm; d:40 mm; N1 max.:23 mm; |