| No. | Brand | C | K | A | T | a | G | h | b |
| 33208 | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | 53 mm | 48.562 mm | - | - | - |
| DC-1215 | - | - | - | - | - | - | - | - | 22.3 mm |
| CPB-1474 | Danfoss | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 37100-0KG70 | - | - | - | - | - | - | - | - | - |
| 6303Y/C172 | SKF | - | - | - | - | - | - | - | - |
| 4305-Brand | INA | 16 mm | - | - | - | mm | - | - | - |
| SY485 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 28016-AA0308A | - | - | - | - | - | 2.381 mm | - | - | - |
| 13-Ply | - | - | - | - | - | - | - | - | - |
| (45%) | - | - | - | - | - | - | - | - | - |
| 4*8 | - | - | - | - | - | - | - | - | - |
| TS185K | NTN | - | - | - | - | - | - | - | - |
| 1.5 | - | - | - | - | - | - | - | 54.769 mm | - |
| 013.50.3150 | - | - | - | - | - | - | - | - | - |
| N21% | INA | - | - | - | - | - | - | - | - |
| GB-2414 | koyo | - | 4.5 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Z400 | - | - | - | - | - | - | - | - | - |
| 38ED | Timken | - | - | - | - | - | - | 62.706 mm | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| MPV046 | - | - | - | - | - | - | - | 265 mm | - |
| 16pc | - | - | - | - | - | - | - | - | - |
| PRM3PA07LN-32 | Parker | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| PW40F00001F1 Swing Bearing For KOBELCO 35SR-5 Excavator | B:5.00 mm; Basic Static Radial Load Rating Co:1040 N; Sealed Speed Rating n3:19000 rpm; D:21.0000 mm; d:12.000 mm; Grease Speed Rating Open/Shielded n1:32000 rpm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:1900 N; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:38000 rpm; |
| 011.75.3150 Slewing Bearing | Grease Speed Rating Open/Shielded n1:3400 rpm; Basic Dynamic Radial Load Rating C:85200 N; Oil Speed Rating Open/Shielded n2:4000 rpm; D:180.0000 mm; Sealed Speed Rating n3:2200 rpm; Accessories:Seal & Snap-Ring; Basic Static Radial Load Rating Co:80000 N; B:28.00 mm; Fillet Radius ra:2.00 mm; d:120.000 mm; |
| L6-37P9Z Four-point Contact Ball Slewing Bearings | E:138.2 mm; s max.:2 mm; ra max.:1 mm; Reference speed:1900 r/min; D:150 mm; da min.:116 mm; B:40 mm; r1,2 min.:1.1 mm; d:110 mm; Mass bearing:2.1 kg; |
| HS6-21P1Z Slewing Ring Bearing 17*25.5*2.2inch | Dimension L:82.5 mm; Width A:36.5 mm; Height H:74.6 mm; Shaft Diameter D:25 mm; Dimension H1:36.5 mm; Weight W:0.30 kg; Thread Diameter G:3/8-16; Basic Static Radial Load Rating Co:7800 N; Basic Dynamic Radial Load Rating C:14000 N; Insert Bearing IB:ZMaRC; |
| VLA200844N ZT Four Contact Ball Slewing Ring 734x950.1x56mm | D:200 mm; Operating clearance factor k2:0.103; s1 max.:11.1 mm; da max.:150 mm; B:53 mm; r1,2 min.:2.1 mm; Fatigue load limit Pu:64 kN; Reference speed:3200 r/min; G:M 120x2; Mass bearing + sleeve:7.65 kg; |
| 131.45.2800 Slewing Bearing | a:3.5 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; h:152 mm; D1:180 mm; d:150 mm; D:170 mm; Specific static load factor K0:45 N/mm²; B1:10 mm; Permissible sliding velocity v max.:0.5 m/s; |
| 1792/1400G Bearing 1400x1780.8x110mm | Accessories:No Shield, no Seal,; d:55.000 mm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:122000 N; B:49.20 mm; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:119000 N; |
| CRBH5013 Cross Roller Bearing 50x80x13mm | d1 ≈:309.1 mm; Ca min.:10 mm; Da max.:339.5 mm; rb max.:3.3 mm; Dimension series:LM 451300; db min.:281 mm; a:61.905 mm; Basic dynamic load rating C:789 kN; Db min.:343 mm; Basic static load rating C0:1400 kN; |
| L6-22P9ZD Four-point Contact Ball Slewing Bearings | C:50 mm; dk:115 mm; b1:9.5 mm; α:14 °; Material constant KM:330; D:130 mm; Basic dynamic load rating C:490 kN; rb max.:1 mm; Basic static load rating C0:2450 kN; Mass plain bearing:4.1 kg; |
| NRXT20030DD Crossed Roller Bearing 200x280x30mm | ra max.:1 mm; Calculation factor f0:13.8; Da max.:65 mm; Calculation factor kr:0.025; D:72 mm; Fatigue load limit Pu:0.655 kN; d1 ≈:46.94 mm; Basic dynamic load rating C:27 kN; B:17 mm; d:35 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Komatsu PC400LC-7 Excavator Part Number 208-25-61100 Swing Bearing Video