| No. | Brand | C | K | A | T | a | G | h | b |
| 22211 | SKF | - | - | - | - | - | - | - | - |
| 5x11x4 | - | - | - | - | - | - | - | - | 22.3 mm |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 30kw | - | - | - | - | - | - | - | - | - |
| 17X40X12 | - | - | - | - | - | - | - | - | - |
| 314302 | - | - | - | - | - | - | - | - | - |
| 4x9x4mm | - | - | - | - | - | - | - | - | - |
| 2-SKF, | SKF | - | - | - | - | - | - | - | - |
| 28316KG001 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | 7.5 mm | - | - | - | - | - | 13.9 mm |
| 1220X2440X2-25mm | - | - | - | - | - | - | - | - | - |
| 825 | koyo | - | - | - | - | - | - | - | - |
| 96-00858-1 | - | - | - | - | - | - | - | 54.769 mm | - |
| NV45/50/60/64/70/80/84/90/111/120/137/150/172/210/237/270 | - | - | - | - | - | - | - | - | - |
| 6702ZZ | - | - | - | - | - | - | 84.836 mm | - | - |
| 30X62X16 | - | - | - | - | - | - | - | - | - |
| CR4136XP | - | - | - | - | 37 mm | 40.982 mm | - | - | - |
| 6308/VA201 | SKF | - | - | - | - | - | - | - | - |
| NK16/16 | - | - | - | - | 610 mm | - | - | - | - |
| 91-20 0641/1-07132 Four-point Contact Ball Slewing Bearing With External Gear | d:300 mm; D:420 mm; with tapered bore:1 300 min-1; Oil:221.550 kN; Static (Cor):11.1 mm; B:90 mm; Pu:1360 kN; rs (min):3 mm; with cylindrical bore:950 min-1; Dynamic (Cr):6 mm; |
| 1797/3230GY Bearing 3230x4100x240mm | D:260 mm; d2 (max):170.5 mm; F:154 mm; rs (min):3 mm; b1:23.5 mm; Static (Coa):473 kN; B:55 mm; b:14 mm; Pu:47.580 kN; s:2.7 mm; |
| CRB20030UUT1 High Precision Cross Roller Ring Bearing | Preload class C GC:1200 N; Db max.:106 mm; d1:82.3 mm; Preload class B GB:600 N; Calculation factor e:0.68; Basic dynamic load rating C:48.8 kN; Reference grease quantity Gref:8.1 cm³; Static axial stiffness, preload class D:447 N/µm; Calculation factor f:1.12; Preload class A GA:300 N; |
| CAT320D Slewing Bearing | Pa:15.3 kN; P180°:42.7 kN; Cap bolt:2 x 3/4-10 UNC; J max.:333.375 mm; J1:60.325 mm; ba:48.419 mm; Cap bolt recommended tightening torque:515.2 N·m; P90°:62.3 kN; H1:114.3 mm; Da:180 mm; |
| 2788/850K Slewing Bearing | C:17 mm; r2s (min):0.6 mm; a:29 mm; B:23 mm; Dynamic (Ca):76.4 kN; T:25.25 mm; Pu:10.460 kN; Static (Coa):85.8 kN; rs (min):2 mm; d2:40 mm; |
| RB19025UUC0 High Precision Cross Roller Ring Bearing | Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; h:17 mm; a:3 mm; B:30 mm; d:16 mm; α:105 °; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; D:22 mm; |
| NRXT15025 Crossed Roller Bearing 150x210x25mm | d:85 mm; B:9.5 mm; d1:125 mm; Mass shaft washer:0.49 kg; r1,2 min.:1 mm; |
| RB45025 Cross Roller Bearing 450x500x25mm | Width A:1.3750 in; Dimension B:4.1250 in; Weight W:1.60 lb; Dimension L:4.5000 in; Dimension J:0.3125 in; Basic Static Radial Load Rating Co:3440 lbf; Shaft Diameter D:1 1/4 in; Dimension N:0.7813 in; Dimension H:1.0000 in; Pin Dia A1:0.2500 in; |
| 21P-25-K1100 Swing Bearing For Komatsu PC180NLC-6K Excavator | d1:237 mm; d:170 mm; B:16.5 mm; r1,2 min.:1.5 mm; Mass shaft washer:2.8 kg; |
| 1797/3230GK5 Bearing 3230x4100x240mm | Max. speed for Taconite seal:325 r/min; End plug (suffix Y):X-5217-2; Stabilizing ring:2 x A8898; P60°:423 kN; H:474.663 mm; H2:95.25 mm; P90°:254 kN; Appropriate attachment bolt size G:1.5 in; J min.:628.65 mm; Cap bolt, SAE grade:5; |
209-25-71101 Swing Bearing For Komatsu PC750SE-6 Excavator Video