| No. | Brand | C | K | A | T | a | G | h | b |
| ISO4706 | - | - | - | - | - | - | - | - | - |
| M42 | - | - | - | - | - | - | - | - | - |
| 380KBD031 | Nachi | - | - | - | - | - | - | - | - |
| 5x11x4 | - | - | - | - | - | - | - | - | 22.3 mm |
| 32015 | SKF | - | - | - | - | - | - | - | - |
| 16010 | fag | - | - | - | - | - | - | - | - |
| DC-1215 | - | - | - | - | - | - | - | - | 22.3 mm |
| 6052-M | fag | - | - | - | - | - | - | - | - |
| +0.25mm | - | - | - | - | - | - | - | - | - |
| VDC-2B-2A3-U-20 | Nachi | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| CB550K3/F1/2 | NTN | - | - | - | - | - | - | - | - |
| 3606 | fag | - | - | - | - | - | - | - | - |
| 10mm | - | - | 12 mm | - | - | - | - | - | - |
| 2-1/2 | - | 153 mm | - | - | - | - | - | - | - |
| 40mm | - | - | - | - | - | - | - | 232.5 mm | - |
| 37152 | - | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 2-in-1 | - | - | - | - | - | - | - | - | - |
| JM612910 | Timken | - | - | - | - | - | - | - | - |
| Offer Slewing Bearing For QY-50 Crane | Labyrinth ring (dc shaft position):LOR 122; da:130 mm; A2:203.2 mm; Lock washer:W 26; Bearing limiting speed:3600 r/min; End plug (suffix Y):EPR 27; R1:79.375 mm; S:4.763 mm; A1:130.175 mm; Pa:98.3 kN; |
| 11-50 2130/2-06410 Four-point Contact Ball Slewing Bearing With External Gear | Tolerance housing:H7; Tolerance shaft:e7; B:140 mm; α:124 °; Coefficient of friction µ min.:0.08; Mass bushing:10.1 kg; h:252.5 mm; Specific dynamic load factor K:25 N/mm²; d:250 mm; a:7 mm; |
| VSA200644-N Slewing Bearing 572x742.3x56mm | B:9.00 mm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:2850 N; D:32.0000 mm; d:15.000 mm; Basic Dynamic Radial Load Rating C:5590 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; Sealed Speed Rating n3:14000 rpm; Fillet Radius ra:0.30 mm; |
| RB1250110 Crossed Roller Bearing | Da max.:460 mm; Axial load factor Y:0.4; Fatigue load limit Pu:265 kN; r1,2 min.:5 mm; da min.:280 mm; da max.:309 mm; D:480 mm; Limiting speed:2000 r/min; D1 ≈:397 mm; Reference speed:1300 r/min; |
| YC85 Slewing Bearing | F:12 mm; r, r1,2 min.:0.3 mm; B:12.5 mm; Mass inner ring:0.0059 kg; d:8 mm; |
| RB15030UU High Precision Cross Roller Ring Bearing | B:15.9 mm; D2R:30.2 mm; Oil Speed Rating n2:20000 rpm; Grease Speed Rating n1:15000 rpm; d:12.000 mm; Basic Static Radial Load Rating Co:5600 N; Basic Dynamic Radial Load Rating C:10400 N; Sealed Speed Rating n3:15000 rpm; Accessories:One Shield & Snap-Ri; D:32.0000 mm; |
| XU080120 Bearing 69x170x30mm | Oil Speed Rating Open/Shielded n2:26000 rpm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; d:10.000 mm; Oil Speed Rating n2:26000 rpm; B:11.00 mm; D:35.0000 mm; Grease Speed Rating Open/Shielded n1:20000 rpm; Accessories:One Shield; Basic Static Radial Load Rating Co:3400 N; |
| 0 Inch | 0 Millimeter x 3.27 Inch | 83.058 Millimeter x 0.753 Inch | 19.126 Millimeter RB11020 Cross Roller Bearings 110*160*20mm | d1 ≈:477 mm; Minimum load factor A:14; D1 ≈:403 mm; r1,2 min.:2 mm; Basic dynamic load rating C:260 kN; H:48 mm; d:400 mm; Fatigue load limit Pu:28.5 kN; da min.:446 mm; Mass bearing (including seat washer where applicable):16.5 kg; Size (mm):0 Inch | 0 Millimeter x 3.27 Inch | 83.058 Millimeter x 0.753 Inch | 19.126 Millimeter ; |
| RB12025 Cross Roller Bearings 120*180*25mm | Oil Speed Rating n2:1800 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:462000 N; Grease Speed Rating n1:1500 rpm; Basic Static Radial Load Rating Co:655000 N; D:400.0000 mm; Fillet Radius ra:3.00 mm; B:65.00 mm; d:220.000 mm; |
| MTE-590T Heavy Duty Slewing Ring Bearing | Fillet Radius ra:0.06 in; D:3.8750 in; B:0.6875 in; d:2.500 in; Basic Static Radial Load Rating Co:31000 N; Fillet Radius rb:0.024 in; Basic Dynamic Radial Load Rating C:32500 N; Grease Speed Rating n1:6400 rpm; Oil Speed Rating n2:11000 rpm; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
9166468 Swing Bearing For HITACHI ZX330LC Excavator Video