| No. | Brand | C | K | A | T | a | G | h | b |
| Sulfate(NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3-25mm | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | Tr 630x6 | - | - |
| N21% | INA | - | - | - | - | - | - | - | - |
| 7003CTRDUMP4Y | NSK | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| PSVK2-25CKG | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 99.5 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | 92.075 mm | - | - | - | - | - |
| EX400 | INA | - | - | - | 52 mm | - | - | - | - |
| SPV6/119 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6309NR | - | - | - | - | - | - | Tr 950x8 | 25 mm | 60 mm |
| 99.5%Min | - | - | - | - | - | - | 54.788 mm | - | - |
| 6209 | - | - | - | - | - | - | M 36x3 | - | - |
| 3.8 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| 024.60.3550 Bearing 3272x3828x226mm | Oil Speed Rating Open/Shielded n2:3600 rpm; d:110.000 mm; Oil Speed Rating n2:3600 rpm; D:200.0000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:143000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2000 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Grease Speed Rating n1:3000 rpm; |
| SX011840 Cross Roller Bearing 200x250x24mm | L:209.55 mm; Adapter sleeve assembly:SNW 10x1.5/8; P60°:28.9 kN; h:28.575 mm; Stabilizing ring:SR-10-8; Bearing:1210 EKTN9; Cap bolt recommended tightening torque:61 N·m; da:41.275 mm; A2:165.1 mm; Mass pillow block:5.9 kg; |
| YRT180 Rotary Table Bearing 180x280x43mm | Comparative axial load rating CFa:330 kN; Comparative radial load rating CF:1630 kN; Fatigue load limit Pu:1080 kN; Calculation factor e:0.4; T:360 mm; d:380 mm; Calculation factor Y1:1.7; Basic static load rating C0:13700 kN; Thrust factor K:1.4; d1 ≈:417 mm; |
| 797/2500G2 Slewing Bearing | B:12.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Dynamic Radial Load Rating C:14600 N; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:11800 N; Grease Speed Rating Open/Shielded n1:8500 rpm; D:72.0000 mm; Accessories:One Seal; d:50.000 mm; Sealed Speed Rating n3:5600 rpm; |
| A12-47N3E Four Point Contact Ball Slewing Bearing With Inernal Gear | d:25 mm; F:30 mm; r, r1,2 min.:0.3 mm; B:38.5 mm; Mass inner ring:0.065 kg; |
| RB15030UUCC0 High Precision Cross Roller Ring Bearing | H1:114.3 mm; PG:1/4 NPT; Da:180 mm; Taconite seal:TER 101; N1:22.225 mm; P180°:71.2 kN; Cap bolt, SAE grade:8; S:4.763 mm; J1:60.325 mm; Cap bolt:5/8-11 UNC; |
| Slewing Ring For Excavator KOBELCO SK220LC III, Part Number:24100N7441F1 | Da:180 mm; A2:173.037 mm; da:76.2 mm; R1:66.675 mm; Labyrinth ring:2 x LOR 185; PG:1/8 NPT; A1:111.125 mm; N1:25.4 mm; R2:30.163 mm; Mass pillow block:33.9 kg; |
| 014.30.630 Slewing Bearing | d1:114.3 mm; G:M 130x2; d:130 mm; B4:23 mm; Mass adapter sleeve assembly:4.25 kg; Lock nut:KML 26; B1:121 mm; d3:155 mm; Hydraulic nut:HMV 26 E; Locking device:MBL 26; |
| 260 mm x 400 mm x 65 mm RA12008UU High Precision Cross Roller Ring Bearing | Fatigue load limit Pu:800 kN; Dw:40 mm; Roller and cage thrust assembly:K 89440 M; Housing washer:GS 89440; Shaft washer:WS 89440; D:400 mm; Limiting speed:700 r/min; Basic dynamic load rating C:2160 kN; Ea:224 mm; Basic static load rating C0:10000 kN; Size (mm):260 mm x 400 mm x 65 mm ; |
| 060.20.1094.500.01.1503 Slewing Ring Bearings | ra max.:3 mm; d2 ≈:263 mm; D:400 mm; r1,2 min.:4 mm; B1:130 mm; Limiting speed:2000 r/min; Basic static load rating C0:2360 kN; Fatigue load limit Pu:196 kN; d1:200 mm; Calculation factor e:0.27; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
XU060094 Crossed Roller Slewing Bearings 57x140x26mm Video