| No. | Brand | C | K | A | T | a | G | h | b |
| 18mm | - | - | - | - | - | - | - | - | - |
| GM23 | - | 168 mm | 10 mm | - | - | - | - | - | - |
| R8VV | NSK | - | - | - | - | - | - | - | - |
| 35x55x10 | - | - | - | - | - | - | - | - | - |
| 2007-2016 | Timken | - | - | - | - | - | - | - | - |
| 2 | Nachi | - | 4 mm | - | - | - | - | - | - |
| Ex200-1 | Hitachi | - | - | - | - | - | - | - | - |
| 8.75" | koyo | - | - | - | - | - | - | - | - |
| Har-2120 | - | - | - | 35.7 mm | - | - | - | - | - |
| 1U3513 | - | - | - | - | - | - | - | - | - |
| 6004-2RLD-C3 | - | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| F1600S | Parker | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3723572220 | Rexroth | - | - | - | - | - | 199.314 mm | - | - |
| Xh200 | - | - | - | - | - | - | - | - | - |
| 1K10-6-12 | Parker | - | - | - | - | - | - | - | - |
| ZAX120 | - | - | - | - | - | - | - | - | - |
| 3-7.8mm | - | - | - | - | - | - | - | - | - |
| 1980-1983 | Timken | - | - | - | - | - | - | - | 22.3 mm |
| EX400 | - | - | - | - | - | - | Tr 710x7 | - | - |
| Sk200-8 | - | - | - | - | - | 18.4 mm | - | - | - |
| 25-150 | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | 57.15 mm | - |
| 9E-1B25-0978-0533 Four Point Contact Ball Slewing Ring | Basic Dynamic Radial Load Rating C:78100 N; Basic Static Radial Load Rating Co:88000 N; Grease Speed Rating n1:3800 rpm; Oil Speed Rating n2:5000 rpm; Sealed Speed Rating n3:4300 rpm; D:110.0000 mm; Accessories:No Shield, no Seal; Fillet Radius ra:1.50 mm; B:38.10 mm; d:60.000 mm; |
| 178764 Slewing Beairng | Da min.:73 mm; Db min.:82 mm; d1 ≈:62.95 mm; D:90 mm; B:33 mm; r3,4 min.:1.5 mm; Reference speed:6000 r/min; Fatigue load limit Pu:16 kN; Dimension series:2FD; C:27 mm; |
| Slewing Bearing For Komatsu PC220 Excavator | Distance J:2.0000 in; Dimension L:3.0000 in; Dimension H1:1.4375 in; Width A:1.2500 in; Dimension F:0.5000 in; Basic Dynamic Radial Load Rating:2520 lbf; Insert Bearing IB:Stainless Steel; Shaft Diameter D:1 in; Thread Diameter G:3/8-16; Basic Static Radial Load Rating Co:1750 lbf; |
| RE 15030 Crossed Roller Bearing 150x230x30mm | D:80 mm; rs:1.5 mm; d:35 mm; Oil:10 000 min-1; Pu:0.874 kN; Da:71 max; Dynamic (Cr):33.367 kN; Grease:8 400 min-1; B:21 mm; Weight:0.447 kg; |
| 4789/1110 Slewing Bearing | Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:7000 rpm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:67600 N; Basic Static Radial Load Rating Co:45000 N; d:30.000 mm; B:39.70 mm; |
| PC300-6 Komastu Excavator Bearing 207-25-61100 | D:180.0000 mm; Basic Dynamic Radial Load Rating C:178000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:3000 rpm; Sealed Speed Rating n3:2000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:166000 N; d:100.000 mm; B:60.30 mm; |
| 9O-1B17-0183-1125 Four Point Contact Ball Slewing Ring | Basic dynamic load rating C:1.68 kN; Fw:7 mm; Fatigue load limit Pu:0.19 kN; Basic static load rating C0:1.83 kN; Reference speed:34000 r/min; Limiting speed:38000 r/min; U:7 mm; Mass needle roller and cage assembly:0.0006 kg; Ew:9 mm; |
| RU 297 UUCC0 Crossed Roller Bearing 210x380x40mm | d:3 mm; Limiting speed:56000 r/min; Fatigue load limit Pu:0.011 kN; da min.:4.6 mm; ra max.:0.2 mm; Basic dynamic load rating C:0.741 kN; Mass bearing:0.0031 kg; Da max.:11.5 mm; Calculation factor f0:6.4; r1,2 min.:0.2 mm; |
| 206-25-00200 Swing Bearing For Komatsu PC220LL-6 Excavator | G:M 25x1.5; Lock nut:KMFE 5; B:10.5 mm; B1:29 mm; d3:38 mm; Mass adapter sleeve assembly:0.088 kg; d1:19.05 mm; d:25 mm; |
| VLI200944N ZT Four Contact Ball Slewing Ring 840x1048x56mm | D:90.0000 mm; Basic Static Radial Load Rating Co:36000 N; d:40.000 mm; Accessories:Two Shields; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:46800 N; B:23.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
XSA140644-N Crossed Roller Bearings 574x742.3x56mm Video