No. | Brand | C | K | A | T | a | G | h | b |
NMRV63 | - | - | - | - | - | - | - | - | - |
2 | Rexroth | - | - | - | - | - | - | - | - |
NK17/20 | SKF | - | - | - | - | - | - | - | - |
22214SC3 | fag | - | - | - | - | - | - | 61.913 mm | - |
15mm | - | - | - | - | - | - | - | - | - |
17x35x7 | - | - | - | - | - | - | - | - | - |
MOT-FC-EV2 | Rexroth | - | 7.5 mm | - | - | - | M 120x2 | - | 13.9 mm |
Assembly-4-Wheel | NSK | - | - | - | - | - | - | - | - |
20x27x4mm | - | - | - | - | 32.545 mm | - | - | - | - |
85cm | - | - | - | - | - | - | 529.006 mm | - | - |
12mm | - | - | - | - | - | - | - | - | - |
K3V63dt | - | - | - | - | - | - | - | - | - |
8x12x3.5 | - | - | - | - | - | - | - | - | - |
220g | INA | - | - | - | - | - | - | - | - |
5PC | INA | - | - | - | - | - | - | - | - |
516007 | Timken | - | - | - | - | - | - | - | - |
SDA16 | - | - | - | - | - | - | - | - | - |
216 | - | - | - | - | - | - | - | - | - |
2019 | - | - | - | - | - | - | M 50x1.5 | - | - |
Mhd112c024npoln | Rexroth | - | - | - | - | - | - | - | - |
3002DS | RBC | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
22311CCK | SKF | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
2mm, | - | - | - | - | - | - | - | - | - |
T6 | - | - | - | - | - | - | - | - | - |
4789/1110 Slewing Bearing | Grease Speed Rating n1:5300 rpm; Oil Speed Rating n2:7000 rpm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:67600 N; Basic Static Radial Load Rating Co:45000 N; d:30.000 mm; B:39.70 mm; |
RB3010 Crossed Roller Bearings | H:257.175 mm; RG:1/2 NPT; Adapter sleeve assembly:SNW 24x4.1/16; Da:215.001 mm; Cap bolt, SAE grade:5; R2:30.163 mm; Taconite seal:TER 111; S:4.763 mm; Mass pillow block:47.2 kg; R1:79.375 mm; |
060.20.0944.500.01.1503 Slewing Ring Bearings For Turntables | Coefficient of friction µ max.:0.15; Mass bushing:0.31 kg; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; a:3 mm; h:46 mm; Permissible sliding velocity v max.:0.5 m/s; Tolerance shaft:e7; d:45 mm; B:45 mm; |
024.30.1000 Slewing Bearing | Basic Static Radial Load Rating Co:48000 N; B:38.10 mm; Sealed Speed Rating n3:5600 rpm; D:80.0000 mm; Grease Speed Rating n1:5600 rpm; Accessories:One Seal & Snap-Ring; d:35.000 mm; Basic Dynamic Radial Load Rating C:52300 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7500 rpm; |
VLA 200544-N Four Point Contact Slewing Ring | Cap bolt recommended tightening torque:271.2 N·m; A1:203.2 mm; h:62.706 mm; S:4.763 mm; Pa:58.7 kN; P90°:218 kN; P150°:120 kN; Stabilizing ring:SR-40-34; R1:122.237 mm; J1:127 mm; |
SK235 Slewing Bearing | Cap bolt:2 x 7/16-14 UNC; Max. speed for Taconite seal:1800 r/min; P180°:12.5 kN; Pa:2.98 kN; da:42.862 mm; L:209.55 mm; A2:165.1 mm; P60°:28.9 kN; Ca:29.794 mm; N1:15.875 mm; |
SX011814 Cross Roller Bearing 70x90x10mm | Fillet Radius rb:1.00 mm; D:130.0000 mm; B:31.00 mm; Basic Static Radial Load Rating Co:78000 N; Oil Speed Rating n2:6300 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:5300 rpm; Fillet Radius ra:2.00 mm; |
7797/1660G Slewing Bearing | +:0.2 mm; das:197 mm; C1:107.2 mm; C:121 mm; B:122 mm; D3:254 mm; K:4 mm; b1:7 mm; Mass bearing:22.5 kg; Ca1:99 mm; |
121.28.800 Slewing Bearing | PosiTrac Plus contact element (dc shaft position):B10724-122; P90°:113 kN; H1:152.4 mm; Stabilizing ring:SR-26-0; Mass pillow block:61.2 kg; Pa:31.2 kN; RG:1/2 NPT; L:466.725 mm; Initial grease fill:382.73 g; Cap bolt recommended tightening torque:400 N·m; |
1797/2600G2K2 Bearing 2600x3232.8x200mm | Basic Radial Load Rating-Static SCO:200000 N; Fillet Radius ra:2.50 mm; B:47.00 mm; Basic Radial Load Rating-Dynamic DC:212000 N; D:215.0000 mm; Fillet Radius rb:1.00 mm; Type:300-RDM Series (from; Speed Rating-Open and Shielded-Grease OSG:6900 rpm; Speed Rating-Open and Shielded-Oil OSO:10100 rpm; d:100.000 mm; |
XSA140844-N Crossed Roller Bearings 774x950.1x56mm Video