| No. | Brand | C | K | A | T | a | G | h | b |
| 6308/VA201 | SKF | - | - | - | - | - | - | - | - |
| RW102R | Timken | - | - | - | - | - | - | - | - |
| 11-160400/1-08130 | - | - | - | - | - | - | - | - | - |
| RW131R | Bower | - | - | - | - | - | - | - | 6 mm |
| 3-25mm | - | - | - | - | - | - | - | - | - |
| 6309NR | - | - | - | - | - | - | Tr 950x8 | 25 mm | 60 mm |
| NPK12-0-4, | - | - | - | - | - | 23.735 mm | - | - | - |
| FZR1000 | - | 15.5 mm | - | - | 20 mm | 17 mm | - | - | - |
| 3310-CD3 | koyo | - | - | - | - | - | - | - | - |
| 2x | INA | - | - | - | - | - | - | - | - |
| 1-14141692-0 | - | - | - | - | - | - | - | - | - |
| 99.5% | INA | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | 60.325 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Mhd112c024npoln | Rexroth | - | - | - | - | - | - | - | - |
| 6D114E-3 | - | - | - | 15 mm | - | - | Tr 850x7 | - | - |
| 4x8 | INA | - | - | 9 mm | - | - | Tr 500x5 | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 96-02363-2 | - | 4.9 mm | - | - | - | - | - | - | 3.1 mm |
| 394 | koyo | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| A14-25P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Tolerance shaft:h9; Permissible sliding velocity v min.:0 m/s; d:12 mm; B:10 mm; Specific dynamic load factor K:40 N/mm²; Mass bushing:0.00061 kg; D:14 mm; Permissible sliding velocity v max.:1 m/s; Coefficient of friction µ min.:0.06; Specific static load factor K0:80 N/mm²; |
| 1787/674G2K Slewing Beairng | Pu:747 kN; D:250 mm; Oil:107.800 kN; Static (Cor):11.1 mm; rs (min):3 mm; Dynamic (Cr):6 mm; d:140 mm; Grease:1080 kN; B:68 mm; with tapered bore:2 200 min-1; |
| SH200C2 Slewing Bearing | Grease Speed Rating Open/Shielded n1:2100 rpm; B:40.00 mm; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:216000 N; d:130.000 mm; Basic Dynamic Radial Load Rating C:179000 N; D:230.0000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Fillet Radius ra:2.50 mm; |
| VLA200944-N Slewing Bearing S-upplier Made In China 834x1046.1x56mm | r5 min.:1 mm; Mass bearing pair:17 kg; Db min.:217 mm; C:106 mm; a:110.441 mm; ra max.:3 mm; Calculation factor e:0.37; Calculation factor Y1:1.8; Reference speed:1600 r/min; K:3 mm; |
| SX011832 Cross Roller Bearing 160x200x20mm | B:44.00 mm; Grease Speed Rating n1:1600 rpm; Fillet Radius ra:2.50 mm; D:280.0000 mm; d:180.000 mm; Basic Dynamic Radial Load Rating C:208000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:260000 N; Oil Speed Rating n2:2600 rpm; |
| 1797/3230G2K7 Bearing 3230x4100x252mm | Pu:2240 kN; Grease:4280 kN; rs (min):4 mm; Oil:358.430 kN; d:280 mm; Static (Cor):11.1 mm; Dynamic (Cr):6 mm; with tapered bore:850 min-1; D:420 mm; B:140 mm; |
| VLA200944N Four Contact Ball Slewing Ring 834x1046x56mm | Mass bearing (including seat washer where applicable):135 kg; r1,2 min.:5 mm; D:540 mm; D1 ≈:346 mm; Da max.:422 mm; Minimum load factor A:180; d:340 mm; ra max.:4 mm; d1 ≈:534 mm; Limiting speed:560 r/min; |
| XSU080258 Cross Roller Bearing 220x295x25.4mm | Basic Dynamic Radial Load Rating C:95600 N; D:130.0000 mm; Accessories:Two Shields; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:88000 N; B:41.30 mm; d:75.000 mm; |
| XR736052 Crossed Roller Bearing 432.03x571.5x38.1mm | H:157.162 mm; Initial grease fill:136.08 g; RG:1/4 NPT; P60°:43.1 kN; N1:19.05 mm; Max. speed for Taconite seal:1575 r/min; R2:25.4 mm; L:279.4 mm; P180°:17.8 kN; Pa:4.8 kN; |
| 50 mm x 80 mm x 16 mm DH215-7 Slewing Bearing | Stabilizing ring:SR-40-34; dc:193.675 mm; da:200 mm; P180°:222 kN; Lock washer:W 40; ba:83.344 mm; J max.:635 mm; H:419.1 mm; Lock nut:AN 40; Cap bolt:1 1/4-7 UNC; Size (mm):50 mm x 80 mm x 16 mm ; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
RA19013 Crossed Roller Bearings 190x216x13mm Video