| No. | Brand | C | K | A | T | a | G | h | b |
| ZAX270 | - | - | - | - | - | - | - | - | - |
| 155-800rpm | - | - | - | - | - | - | - | - | - |
| (OSB-24) | INA | - | - | - | - | - | - | - | - |
| 2015 | INA | 22.5 mm | - | - | - | - | - | - | - |
| (ACS1-L25) | - | - | - | - | - | - | - | - | - |
| BRG852 | - | - | - | - | - | - | - | - | - |
| 2Pcs | - | - | - | - | - | - | - | - | - |
| 200 | - | 43 mm | - | - | - | 39.062 mm | - | - | - |
| OMP/BMP/BM1 | - | - | - | 10 mm | - | - | Tr 800x7 | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 85cm | - | - | - | - | - | - | 529.006 mm | - | - |
| F600zz | - | - | - | - | - | - | - | 45.244 mm | - |
| 35 | - | - | - | - | - | - | - | - | - |
| DHF08-221H | - | - | - | - | - | - | - | - | - |
| 60cm | - | - | - | - | - | - | - | - | - |
| x360 | - | - | - | - | - | - | - | - | - |
| ZK04 | - | - | - | - | - | - | - | - | - |
| 1700 | - | - | - | - | - | - | - | - | - |
| 410 | - | - | - | - | - | - | - | - | - |
| +001 | - | - | - | - | - | 3 mm | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| 6211 | SKF | - | - | - | - | - | - | - | - |
| 3 | SKF | - | - | - | - | - | - | - | - |
| Abskg-60al9/Vgf2-016/132s | Rexroth | - | - | - | - | - | - | 39.688 mm | - |
| VSU200414 Slewing Bearing / Four Point Contact Bearing 342x486x56mm | d3:580 mm; d:500 mm; G3:12 mm; Locking device:MS 30/500-96; B1:208 mm; Lock nut:HME 30/500; d1:470 mm; G2:M 8; Mass adapter sleeve assembly:74.3 kg; A:6.5 mm; |
| 132.45.2240 Slewing Bearing | Basic Static Radial Load Rating Co:20800 N; B:17.00 mm; Fillet Radius ra:1.00 mm; D:72.0000 mm; Basic Dynamic Radial Load Rating C:30700 N; Grease Speed Rating n1:8000 rpm; Fillet Radius rb:0.60 mm; d:35.000 mm; Oil Speed Rating n2:11000 rpm; |
| RB17020 Cross Roller Bearings 170*220*20mm | Oil Speed Rating Open/Shielded n2:3600 rpm; d:140.000 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:2.00 mm; D:210.0000 mm; Basic Dynamic Radial Load Rating C:111000 N; B:33.00 mm; Accessories:Snap-Ring; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:108000 N; |
| CRB30040UUT1 High Precision Cross Roller Ring Bearing | ra max.:1 mm; B:100 mm; Basic static load rating C0:4500 kN; α:12 °; Design (sliding contact surface combination):Steel/PTFE fabric; da min.:120 mm; Specific dynamic load factor K:300 N/mm²; Specific static load factor K0:500 N/mm²; da max.:124.5 mm; r2 min.:1 mm; |
| 023.50.2000 Slewing Bearing | Grease Speed Rating n1:7000 rpm; d:30.000 mm; B:27.00 mm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:28000 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:7000 rpm; Oil Speed Rating n2:9500 rpm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30300 N; |
| RE3010 Cross Roller Bearing 30x55x10mm | H:400.05 mm; PG:1/4 NPT; Da:339.999 mm; P150°:136 kN; Eye bolt:2 x 1/2-13 UNC; Pa:59.6 kN; Cap bolt recommended tightening torque:1735.4 N·m; Mass pillow block:214 kg; Bearing limiting speed:2000 r/min; Bearing:23044 CCK/W33; |
| 133.32.1000 Slewing Bearing | Tolerance housing:H7; Tolerance shaft:e7; Mass bushing:2.3 kg; α:124 °; d:95 mm; D:115 mm; h:96.5 mm; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; a:4 mm; |
| Slewing Ring For Excavator KOBELCO SK350-8, Part Number:LC40F00018F1 | Q150°:2400 kN; Cap bolt, size:M 36x240; Locating ring:2 x FRB 10/620; Mass housing:470 kg; H:715 mm; N4 max.:30 mm; Oil level, max.:110 mm; Bearing (basic designation):C 3176 K; Oil seal:2 x TSD 3176 U; Q120°:4200 kN; |
| 789/500 Slewing Bearing | P150°:105 kN; H2:60.325 mm; Cap bolt:7/8-9 UNC; Housing:SAFS 228; Stabilizing ring:SR-28-0; Pa:82.3 kN; J max.:434.975 mm; A1:149.225 mm; P180°:127 kN; A2:260.35 mm; |
| 203-25-62100 Swing Bearing For Komatsu PC120-6Z Excavator | B:25.40 mm; Keyway e:21.4 mm; X-L-O Part Number:55-57; d:20.640 mm; Preload:30 lb; Oil Mist Speed Rating Max. n3:24000 rpm; Grease Speed Rating Max. n1:20000 rpm; Keyway f:1.6 mm; Fillet Radius ra:1.00 mm; D:50.8000 mm; |
35 mm x 72 mm x 17 mm RA5008C Crossed Roller Bearings 50x66x8mm Video
6207 DU NSK Ball Bearing 35x72x17 mm deep groove ball
6207 DU(DoubleDU) NSK Deep Groove Ball Bearing
6207 NSK Deep Groove - Quality Bearings Online Ltd
This 6207 NSK bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 35x72x17
NSK - 6207 C0 - Motion Industries
Radial/Deep Groove Ball Bearing - Round Bore, 35 mm ID, 72 mm OD, 17 mm Width, Open, Internal Clearance: C0. ... SKF 6207 (CN) ... Radial/Deep Groove Ball Bearing - Round Bore, 35 mm ID, 72 mm OD, 17 mm Width, Open, Internal Clearance: CN
6207 DDU NSK Deep Groove - Quality Bearings Online
This 6207DDU NSK bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 35x72x17
Deep Groove Ball Bearings | Ball Bearings | Products | NSK
NSK manufacture a full range of deep groove ball bearings. These bearings are the most common type and are used in a wide variety of applications
NSK 6207 Deep Groove Ball Bearing, Single Row, Open
NSK 6207 Deep Groove Ball Bearing, Single Row, Open, Pressed Steel Cage, Normal Clearance, Metric, 35mm Bore, 72mm OD, 17mm Width, 9500rpm
NSK 6207-VV-NR Deep Groove Ball Bearings - Mteric 17 mm
NSK 6207-VV-NR Deep Groove Ball Bearings - Mteric 17 mm ID 35 mm OD 72 mm Width: Amazon.com: Industrial & Scientific