No. | Brand | C | K | A | T | a | G | h | b |
2800W | - | - | - | - | - | - | - | - | - |
12-3-3 | - | - | - | - | - | - | - | - | - |
204SZZ | - | - | - | - | - | - | - | - | - |
2203 | SKF | - | - | - | - | - | - | - | - |
4X8 | INA | - | - | - | - | - | - | - | - |
3-8mm | INA | - | - | - | - | - | - | - | - |
25mm | - | - | - | - | - | - | - | - | - |
12x | - | - | - | - | - | - | - | - | - |
1 | Parker | - | - | - | - | - | - | - | 13.9 mm |
6202LLUC3 | NTN | - | - | - | - | - | - | - | - |
0811404752 | Rexroth | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
GTFE12-00-260 | - | - | - | - | - | - | - | - | - |
47620 | Timken | - | - | - | - | - | - | - | - |
S6205-2RS | - | - | - | - | - | - | - | - | - |
5/10/50pcs | - | - | - | - | - | - | - | - | - |
21975 | - | - | - | - | - | - | Tr 710x7 | - | - |
200*360*60mm | - | - | - | - | - | - | - | - | - |
90% | - | - | - | - | - | - | - | - | - |
HPIB020 | - | - | - | - | - | - | - | - | - |
H-52-LW | RBC | - | - | - | - | - | - | - | - |
12V | - | - | - | - | - | - | - | - | - |
R145LCR | - | - | - | - | - | - | - | - | - |
30217 | NSK | - | - | - | - | - | - | - | - |
1 | - | - | - | - | - | - | - | - | - |
NU216ECM/C3 | SKF | - | - | - | - | - | 337.896 mm | - | - |
4] | - | - | - | - | - | - | - | - | - |
9mm | - | - | - | - | - | - | Tr 630x6 | - | - |
7 | TRW | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
9E-1B40-1002-1025 Four Point Contact Ball Slewing Ring | Calculation factor f:1.09; da min.:76 mm; Da max.:104 mm; Calculation factor f1:0.99; Calculation factor f2B:1.03; Preload class B GB:610 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; B:20 mm; Static axial stiffness, preload class A:159 N/µm; Calculation factor f2A:1; |
DH280 Slewing Bearing | Stabilizing ring:2 x SR-1617; da:71.438 mm; A2:171.45 mm; N1:22.225 mm; H:222.25 mm; R1:66.675 mm; Initial grease fill:365.71 g; P150°:35.6 kN; H1:114.3 mm; PG:1/4 NPT; |
EX400-3 Slewing Bearing | Limiting speed:6300 r/min; Basic static load rating C0:90 kN; Mass needle roller and cage assembly:0.075 kg; Fatigue load limit Pu:11.2 kN; Basic dynamic load rating C:35.2 kN; U:20 mm; Ew:79 mm; Reference speed:5600 r/min; Fw:73 mm; |
A18-89P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Limiting speed:360 r/min; Da max.:1172 mm; Mass bearing:2270 kg; B:438 mm; Calculation factor e:0.35; D1 ≈:1028 mm; D:1220 mm; r1,2 min.:12 mm; Calculation factor Y2:2.9; Fatigue load limit Pu:1700 kN; |
RB3010 Crossed Roller Bearings | H:257.175 mm; RG:1/2 NPT; Adapter sleeve assembly:SNW 24x4.1/16; Da:215.001 mm; Cap bolt, SAE grade:5; R2:30.163 mm; Taconite seal:TER 111; S:4.763 mm; Mass pillow block:47.2 kg; R1:79.375 mm; |
RE 2008 UU Crossed Roller Bearing 20x36x8mm | A1:15 mm; Basic dynamic load rating C:35.1 kN; Recommended diameter for attachment bolts, inch G:0.625 in; N4:2 mm; B:51.6 mm; s1:32.6 mm; Recommended diameter for attachment bolts, mm G:16 mm; DN:6.5 mm; L:116 mm; B4:9 mm; |
21M-25-11100 Swing Bearing For Komatsu PC600-7K Excavator | Grease Speed Rating n1:2400 rpm; Basic Dynamic Radial Load Rating C:133000 N; Oil Speed Rating n2:3000 rpm; Fillet Radius rb:1.00 mm; d:170.000 mm; D:230.0000 mm; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:170000 N; |
3R6-79N9 Three Row Roller, Heavy-duty Slewing Ring With Internal Gear | r5 min.:1 mm; Ca min.:6 mm; Calculation factor Y2:2.3; Mass bearing pair:12.4 kg; Limiting speed:3400 r/min; Calculation factor Y1:1.6; ra max.:2.5 mm; d:105 mm; 2B:100 mm; Basic static load rating C0:1020 kN; |
Cross Roller Bearing XD.10.1029P5 Thrust Tapered Roller Bearing 1028.7x1327.15x 114.3mm | Accessories:One Shield; d:8.000 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:1360 N; Oil Speed Rating Open/Shielded n2:43000 rpm; B:7.00 mm; D:22.0000 mm; Basic Dynamic Radial Load Rating C:3250 N; Sealed Speed Rating n3:23000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm; |
China Wind Power Slewing Bearing 033.45.2333.03 Wind Turbine Slewing Bearing | L:558.8 mm; PG:1/4 NPT; P120°:85.9 kN; A2:279.4 mm; h:47.625 mm; Max. speed for Taconite seal:440 r/min; P150°:78.3 kN; End plug (suffix Y):EPR 21; Housing:SAF 038 KA; R1:104.775 mm; |
140 mm x 200 mm x 80 mm VLI200744N Flange Slewing Ring 648x848x56mm Video
SL04140 -PP INA • SP - SP-SpareParts
Buy SL04140 -PP manufactured by INA. Inner Diameter: 140, Outer Diameter: 200, Width: 80, Weight: 7560. a.k.a. 319428-2LS (SKF),319428A-2LS (SKF)
Cylindrical roller bearing - SL04140PP - INA/FAG - KRAMP
Part number, SL04140PP. Unit, Each. Long description, Cylindrical roller bearings INA/FAG, series SL04 50..PP. Height, 80 mm. Inside diameter, 140 mm
Ina USA Corp. | SL04140PP | SL04 Series Cylindrical Roller
Shop Ina USA Corp. SL04140PP at Applied.com, which includes; 140 mm ID x 200 mm OD x 80 mm Wide, Double Sealed, Non-Separable, Double Row,
SL04140-PP INA • ABF Store
SL04140-PP INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
Cylindrical roller bearings - - medias - Schaeffler
We are continually developing INA and FAG products further - for your benefit. Unfortunately you have ... Product SL04140-PP has now been renamed. The new
Cylindrical roller bearings - SL04140-D-PP - medias - Schaeffler
SL04140-D-PP. Cylindrical roller bearings locating bearing, double row, full complement cylindrical roller set, light series, with annular slots, lip seals on both
INA SL04140 - PP Cylindrical Roller Bearing - TradeBearings
INA SL04140 - PP Cylindrical Roller Bearing 150x210x80-INA SL04140-PP bearing,Seals Type:Optional,Material:Bearing Steel ; Carbon Steel; Stainless Steel