| No. | Brand | C | K | A | T | a | G | h | b |
| CR808XPND; | - | - | - | - | - | - | - | - | - |
| 750 | NTN | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 61815 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
| HED8 | - | - | - | - | - | - | M 90x2 | - | - |
| 12-15 | - | - | - | - | 342.9 mm | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 6 | Rexroth | - | - | - | - | - | - | - | - |
| 511008 | Timken | - | - | - | - | - | - | - | - |
| 09263-15043-000 | - | - | - | - | - | - | - | - | - |
| 70 | - | - | - | - | - | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - | - |
| 61806 | fag | - | - | 15 mm | - | - | Tr 1060x8 | - | - |
| (21%Min) | - | - | - | - | - | 23.11 mm | - | - | - |
| 15X30X5 | - | - | - | - | - | - | - | - | - |
| 4] | - | - | - | - | - | - | - | - | - |
| k033 | INA | - | - | - | - | - | - | - | - |
| ,1 | - | - | - | - | 20.638 mm | - | - | - | - |
| 6004-2RSH | SKF | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | 11.2 mm | - | - | - |
| 6SD1TC | - | - | - | - | - | - | - | - | - |
| 90 | - | - | - | - | - | - | - | - | - |
| 33117 | Timken | - | - | - | - | - | - | - | - |
| 2005-2010 | - | - | - | - | - | 27 mm | - | - | - |
| MTE-145T Slewing Bearings(145x312x50mm) (5.709x12.286x1.968inch) With External Gear | U:13 mm; Limiting speed:26000 r/min; Basic static load rating C0:14.6 kN; Ew:21 mm; Fw:17 mm; Mass needle roller and cage assembly:0.0065 kg; Reference speed:22000 r/min; Fatigue load limit Pu:1.73 kN; Basic dynamic load rating C:10.1 kN; |
| DH55-5 Slewing Bearing | B:28.5 mm; d:300 mm; d1:415 mm; r1,2 min.:3 mm; Mass shaft washer:15.2 kg; |
| MTE-145 Heavy Duty Slewing Ring Bearing | Basic Dynamic Radial Load Rating C:572000 N; Oil Speed Rating n2:1600 rpm; Grease Speed Rating n1:1400 rpm; Fillet Radius rb:1.00 mm; d:240.000 mm; Basic Static Radial Load Rating Co:1020000 N; D:360.0000 mm; Fillet Radius ra:2.50 mm; B:112.00 mm; |
| YRT850 Rotary Table Bearings (850x1095x124mm) Turntable Bearing | h:3.5 mm; Basic static load rating C0:21.6 kN; a:25 mm; B:15 mm; Da max.:45 mm; Calculation factor Y0:0.58; r1,2 min.:1.1 mm; r0:0.5 mm; b:4.5 mm; D1 ≈:40.8 mm; |
| XU060111 Cross Roller Bearings,XU060111 Bearings SIZE 76.2x145.79x15.87mm | End plug (suffix Y):EPR 15; N1:22.225 mm; R2:31.75 mm; P120°:55.6 kN; Appropriate attachment bolt size G:0.75 in; ba:51.594 mm; Bearing:23026 CCK/W33; H2:50.8 mm; H1:125.425 mm; J1:69.85 mm; |
| RK6-22P1Z Slewing Bearings (17.09x25.51x2.205inch) Turntable Bearing | P180°:37.8 kN; Initial grease fill:218.29 g; Da:150 mm; Bearing:1314; Pa:24.5 kN; L:330.2 mm; N1:22.225 mm; dc:66.675 mm; Cap bolt, SAE grade:8; Mass pillow block:18.2 kg; |
| YRTSM460 Rotary Table Bearing 460x600x70mm | Duty cycle tolerance ±:10 %; Phase shift output signal:90 °; Duty cycle:50 %; Mass sensor unit:0.57 kg; Number of pulses per revolution N:256; Period accuracy ±:8 %; Cable connector type:AMP Superseal; Limiting speed:300 r/min; Phase shift output signal tolerance ±:30 °; |
| 9E-1B32-0848-0938 Four Point Contact Ball Slewing Ring | Fillet Radius ra:2.00 mm; d:50.000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Accessories:One Shield & Snap-Ri; B:31.00 mm; Sealed Speed Rating n3:3700 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:87100 N; Grease Speed Rating Open/Shielded n1:5200 rpm; Basic Static Radial Load Rating Co:52000 N; |
| RE25030 Cross Roller Bearing 250x330x30mm | Basic static load rating C0:490 kN; da min.:108 mm; b:6 mm; Calculation factor Y2:3.4; d2 ≈:115 mm; B1:64 mm; D:165 mm; G1:11 mm; B2 ≈:68 mm; B:52 mm; |
| RB40035 Cross Roller Bearings 400*480*35mm | Fillet Radius rb:1.00 mm; D:250.0000 mm; Grease Speed Rating n1:1800 rpm; d:95.000 mm; Fillet Radius ra:3.00 mm; B:110.00 mm; Basic Dynamic Radial Load Rating C:410000 N; Basic Static Radial Load Rating Co:490000 N; Oil Speed Rating n2:2400 rpm; |
VLI200944N Four Contact Ball Slewing Ring 840x1048x56mm Video