| RE 50025 UU Crossed Roller Bearing 500x550x25mm | Calculation factor f2B:1.03; Preload class B GB:150 N; Reference grease quantity Gref:1.7 cm³; d:30 mm; Mass bearing:0.11 kg; C1:3.7 mm; Calculation factor f0:7.9; ra max.:1 mm; Static axial stiffness, preload class B:44 N/µm; Db max.:50.8 mm; |
| RB11015 Cross Roller Bearings 110*145*15mm | Basic Static Radial Load Rating Co:52000 N; Basic Dynamic Radial Load Rating C:81900 N; B:31.00 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Grease Speed Rating n1:5000 rpm; Accessories:One Shield; D:130.0000 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; |
| MTO-210T Heavy Duty Slewing Ring Bearing | Housing:SSAFS 038 KA; ba:69.85 mm; P90°:207 kN; Initial grease fill:793.8 g; L:558.8 mm; Cap bolt recommended tightening torque:813.5 N·m; H:338.137 mm; Pa:42.9 kN; Stabilizing ring:2 x 38151-38; RG:3/4 NPT; |
| RU148(G) Cross Roller Bearing 90x210x25mm | r1,2 min.:1.1 mm; Basic dynamic load rating C:31.9 kN; Da max.:94 mm; Ca max.:5.33 mm; Db min.:108 mm; r0 max.:0.6 mm; d1 ≈:76.3 mm; b:2.7 mm; Basic static load rating C0:25 kN; C:2.87 mm; |
| 014.30.500 Slewing Bearing | Oil:65.790 kN; Grease:587 kN; Dynamic (Cr):3 mm; d:100 mm; rs (min):2 mm; Static (Cor):5.5 mm; Pu:379 kN; D:165 mm; B:52 mm; with cylindrical bore:2 000 min-1; |
| S24-178E1 Angular Contact Ball Slewing Rings With External Gear | A2:173.037 mm; Initial grease fill:181.44 g; Labyrinth ring (dc shaft position):LOR 188; Max. speed for PosiTrac Plus seal:1450 r/min; H2:44.45 mm; H1:114.3 mm; Cap bolt recommended tightening torque:515.2 N·m; Pa:24.5 kN; da:85 mm; Ca:69.799 mm; |
| 91-32 1455/1-06165 Four-point Contact Ball Slewing Bearing With External Gear | Fillet Radius rb:1.00 mm; d:45.000 mm; Basic Dynamic Radial Load Rating C:127000 N; D:120.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:122000 N; Oil Speed Rating n2:5600 rpm; B:58.00 mm; Grease Speed Rating n1:4800 rpm; |
| CAT200B Slewing Bearing | s1:38.1 mm; T:66.1 mm; Hexagonal key size for grub screw N:5 mm; Fatigue load limit Pu:0.98 kN; A3:3.2 mm; Db1:107 mm; Housing:FY 510 M/VZ033; J:111 mm; Basic dynamic load rating C:35.1 kN; A:43 mm; |
| Cross Roller Bearing 615895A Thrust Tapered Roller Bearing 901.7x1117.6x82.555mm | Cap bolt recommended tightening torque:400 N·m; Mass pillow block:63.9 kg; Housing:SAF 034 KA; Adapter sleeve assembly:SNW 3034x6; Bearing limiting speed:2800 r/min; ba:64.294 mm; da:152.4 mm; N1:28.575 mm; h:43.656 mm; Cap bolt, SAE grade:5; |
| RE30025 Cross Roller Bearings,RE30025 Bearings SIZE 300x360x25mm | d1:112.713 mm; B:21 mm; Hydraulic nut:HMV 26 E; d3:155 mm; G:M 130x2; Mass adapter sleeve assembly:4.45 kg; Lock nut:KML 26; d:130 mm; B4:23 mm; B1:121 mm; |