No. | Brand | C | K | A | T | a | G | h | b |
4X8 | - | - | - | - | - | - | - | - | - |
62212 | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
AXB200 | - | - | - | - | - | - | - | - | - |
60 | - | - | - | - | - | - | - | - | - |
450 | - | 46 mm | - | - | 57 mm | - | - | - | - |
120x180x46 | - | - | - | - | - | - | - | - | - |
120 | - | - | - | - | - | - | - | - | - |
1306 | - | - | - | 84.138 mm | - | 5.556 mm | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
Si3n4 | - | - | - | - | - | - | - | - | - |
PSVK2-25CKG | - | - | - | - | - | - | - | - | - |
G10 | - | - | - | - | - | - | - | - | - |
3-NSK-bearing | NSK | - | - | - | - | - | - | - | - |
65x85x10 | INA | - | - | - | - | - | - | - | - |
34CrMo4 | - | - | - | 6.5 mm | - | - | Tr 260x4 | - | - |
22311CCK | SKF | - | - | - | - | - | - | - | - |
5mm/0.5mm | - | - | - | - | - | - | - | - | - |
7218CD/P4A | SKF | - | - | - | - | - | - | - | - |
100% | INA | - | - | - | - | - | - | - | 1.6 mm |
2 | - | - | - | 114.3 mm | - | - | - | - | - |
2289 | - | - | - | - | 46.4 mm | - | - | - | - |
30pcs | - | - | - | - | - | - | M 30x2 | - | - |
S6804-2RS | - | - | - | - | - | - | Tr 670x6 | 28 mm | 50 mm |
VU140179 Slewing Bearing Manufacturer 124.5x234x35mm | D:150.0000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; Sealed Speed Rating n3:2600 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; d:100.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:63700 N; B:24.00 mm; |
RA12008 Cross Roller Bearing 120x136x8mm | ra max.:3 mm; Basic static load rating C0:216 kN; Reference speed:3800 r/min; Limiting speed:5000 r/min; r3,4 min.:3 mm; B:33.5 mm; Fatigue load limit Pu:25.5 kN; Mass bearing:2.19 kg; Ca min.:4 mm; Calculation factor Y:0.68; |
Komatsu PC128 Excavator Slewing Bearing | Dimension H1:1.3125 in; Dimension F:0.5000 in; Basic Dynamic Radial Load Rating:2860 lbf; Dimension S1:0.7188 in; Shaft Diameter D:3/4 in; Dimension L:3.0000 in; Thread Diameter G:3/8-16; Width A:1.4375 in; Weight W:0.51 lb; Insert Bearing IB:ZMaRC; |
70 mm x 100 mm x 16 mm XSU141094 Cross Roller Bearing 1024x1164x56mm | P150°:12 kN; ba:36.513 mm; P180°:14.2 kN; P60°:35.6 kN; H1:82.55 mm; Stabilizing ring:SR-13-11; Cap bolt, SAE grade:8; P120°:13.3 kN; Taconite seal:TER 24; h:36.513 mm; Size (mm):70 mm x 100 mm x 16 mm ; |
XV90 Cross Roller Bearings M-anufacturer 90x145x19mm | Basic Static Radial Load Rating Co:190000 N; Accessories:One Shield; B:36.00 mm; D:220.0000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Basic Dynamic Radial Load Rating C:157000 N; d:140.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2100 rpm; |
CRBF2012AT High Precision Crossed Roller Bearing | G:M 130x2; B:21 mm; Hydraulic nut:HMV 26 E; d1:112.713 mm; Mass adapter sleeve assembly:3.05 kg; d:130 mm; Lock nut:KML 26; B1:80 mm; B4:23 mm; d3:155 mm; |
RKS.161.14.0944 Cross Roller Slewing Bearing With External Gear | A2:222.25 mm; H:222.25 mm; Stabilizing ring:SR-20-17; P90°:71.2 kN; J max.:333.375 mm; P150°:40 kN; Ca:70.104 mm; da:88.9 mm; Da:180 mm; R2:30.163 mm; |
VLA 200644-N Four Point Contact Slewing Ring | ba min.:4 mm; Fatigue load limit Pu:2.75 kN; Db min.:195 mm; d1 ≈:139.05 mm; d:120 mm; Reference speed:7500 r/min; D2 ≈:165.3 mm; Ca max.:6.81 mm; r1,2 min.:2 mm; Calculation factor f0:15.9; |
PC350-6 Slewing Bearing | |
PC30/96T Slewing Bearing | Da max.:1132 mm; Fatigue load limit Pu:655 kN; r1,2 min.:5 mm; da min.:968 mm; ra max.:4 mm; Reference speed:170 r/min; D1 ≈:1087 mm; Calculation factor Y:0.4; Mass bearing:240 kg; das:1012 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
VLA200944N ZT Four Contact Ball Slewing Ring 834x1046x56mm Video