| 131.50.4500 Slewing Bearing | Limiting speed:1200 r/min; H:48 mm; Basic dynamic load rating C:260 kN; Reference speed:850 r/min; d1 ≈:477 mm; Fatigue load limit Pu:28.5 kN; Da max.:434 mm; da min.:446 mm; D:480 mm; Minimum load factor A:14; |
| RB8016 Crossed Roller Bearings | L:419.1 mm; Initial grease fill:481.95 g; H:239.316 mm; Appropriate attachment bolt size G:0.75 in; P150°:50.7 kN; Stabilizing ring:2 x SR-1522; Ca:62.789 mm; J1:69.85 mm; ba:42.069 mm; P180°:60.9 kN; |
| 792/1250G2 Slewing Bearing | Oil Speed Rating n2:2900 rpm; d:110.000 mm; D:320.0000 mm; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:2200 rpm; Basic Dynamic Radial Load Rating C:371000 N; B:70.00 mm; Basic Static Radial Load Rating Co:390000 N; |
| VRT 2125A Cross Roller Table 30x125x12mm | Diameter N:0.5000 in; Dimension L:2.7500 in; Height T:1.5313 in; Dimension A2:0.6250 in; Basic Dynamic Radial Load Rating:3150 lbf; Shaft Diameter D:15/16 in; Basic Static Radial Load Rating Co:1750 lbf; Distance J:3.8906 in; Dimension DA:2.5000 in; Weight W:1.35 lb; |
| RU 297G Crossed Roller Bearing 210x380x40mm | Oil Speed Rating n2:4300 rpm; D:140.0000 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:138000 N; Sealed Speed Rating n3:3200 rpm; d:65.000 mm; B:58.70 mm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:108000 N; Fillet Radius ra:2.00 mm; |
| VLI200644N Flange Slewing Ring 546x748x56mm | D1 ≈:534 mm; Reference speed:530 r/min; H:85 mm; d:530 mm; D:640 mm; Da max.:575 mm; d1 ≈:636 mm; Limiting speed:750 r/min; ra max.:2.5 mm; Mass bearing (including seat washer where applicable):58.5 kg; |
| 12 mm x 32 mm x 10 mm Komatsu PC120-6 Excavator Slewing Bearing | Material constant KM:330; w:80 mm; Basic dynamic load rating C:465 kN; r1 min.:1 mm; l7 min.:80 mm; C1 max.:43 mm; d4 ≈:92 mm; h1:200 mm; G:M 56x4; l4 max.:284 mm; Size (mm):12 mm x 32 mm x 10 mm ; |
| 9O-1Z20-0220-0184 Crossed Roller Slewing Ring | Fatigue load limit Pu:365 kN; T:148 mm; r1,2 min.:4 mm; Basic dynamic load rating C:2289 kN; Basic static load rating C0:4500 kN; d:380 mm; C:112 mm; D1 ≈:497 mm; Calculation factor Y1:2.3; Mass bearing:80.2 kg; |
| Slewing Ring For Excavator HITACHI EX330-5, Part Number:9166468 | Da:250 mm; R1:87.313 mm; P60°:249 kN; Adapter sleeve assembly:SNW 28x4.15/16; S:4.763 mm; Housing:SAF 528; Cap bolt recommended tightening torque:400 N·m; P180°:103 kN; ba:61.119 mm; H:305.594 mm; |
| 1167/700 Bearing 700x900x36mm | Bolt Pattern D:2 3/4 in; Bolt Pattern E:23 1/2 in; Frame Accepts These Shaft Sizes (Bearing Bore):40 mm; Bolt Pattern C:0.55 in; Shaft C/L Distance F:1 31/32 in; Frame Size B:25 in; Frame Size A:5 1/4 in; Height G:3.938 in; Travel:18; |