| No. | Brand | C | K | A | T | a | G | h | b |
| County,California,CA,HABS,1 | Parker | - | 3 mm | - | - | - | - | - | 6 mm |
| SH120 | - | - | - | - | - | - | - | - | - |
| 6303 | fag | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2000-2005 | Timken | - | - | - | - | - | M 150x2 | - | - |
| ZH02 | - | - | - | - | - | - | - | - | - |
| GSX1250 | - | - | - | - | - | - | - | - | - |
| 40L/M | - | - | - | - | - | - | - | - | - |
| TL194 | - | - | - | - | - | - | - | - | - |
| CL2B-KA168-2 | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| 440x720x280 | - | - | - | - | - | - | - | - | - |
| PC220-7 | - | - | - | - | - | - | - | - | - |
| 8B663H-20 | - | - | - | - | - | - | - | - | - |
| Mr84 | - | - | - | - | - | - | - | - | - |
| 25kg | - | - | - | - | - | - | - | - | - |
| KN010308 | Kaydon | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 21 | - | - | - | - | - | - | - | 60.325 mm | - |
| 3%-90% | - | - | - | - | - | - | - | - | - |
| 38X21 | - | - | - | - | - | - | - | 295 mm | - |
| As6669 | - | - | - | - | - | - | - | - | - |
| 187420 | - | - | - | - | - | - | - | - | - |
| Slewing Bearing RKS.060.20.0944 944mm X 1016mm X 945.5mm | Fatigue load limit Pu:137 kN; D:270 mm; D1 ≈:228 mm; da min.:158 mm; B1:114 mm; Calculation factor e:0.35; Calculation factor Y0:1.8; Basic dynamic load rating C:1129 kN; G1:17 mm; r1,2 min.:3 mm; |
| CRB15025UUT1 High Precision Cross Roller Ring Bearing | Basic Dynamic Radial Load Rating:4560 lbf; Basic Static Radial Load Rating Co:3440 lbf; Dimension DA:3.5000 in; Distance J:5.1250 in; Dimension A1:1.4063 in; Shaft Diameter D:1 7/16 in; Diameter N:0.5625 in; Dimension L:3.6250 in; Dimension A2:0.5625 in; Height H:6.1250 in; |
| A12-22E2 Four Point Contact Ball Slewing Bearing With External Gear | D:100 mm; r1s (min):1.5 mm; r2s (min):0.6 mm; d2:55 mm; Pu:11.730 kN; rs (min):2 mm; C:18 mm; T:22.75 mm; Dynamic (Ca):81 kN; Static (Coa):96.2 kN; |
| RB5013 Crossed Roller Bearings 50*80*13mm | R1:65.088 mm; P150°:48 kN; Stabilizing ring:2 x 38151-24; Mass pillow block:39 kg; Bearing:23024 CCK/W33; da:101.6 mm; R2:30.163 mm; Cap bolt recommended tightening torque:298.3 N·m; Ca:55.804 mm; J1:60.325 mm; |
| VSU200744 Slewing Bearing / Four Point Contact Bearing 672x816x56mm | N1:23.813 mm; Limiting speed:2100 r/min; Basic dynamic load rating C:426 kN; S:0.794 mm; J:196.85 mm; A6:31.75 mm; A5:46.831 mm; da:101.6 mm; Attachment bolt diameter G:4 x 22.225; Mass bearing unit:30.9 kg; |
| RE10016 Cross Roller Bearings,RE10016 Bearings SIZE 100x140x16mm | Basic Static Radial Load Rating Co:53000 N; Fillet Radius ra:1.50 mm; D:100.0000 mm; Basic Dynamic Radial Load Rating C:72800 N; Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:4500 rpm; B:42.90 mm; d:45.000 mm; Oil Speed Rating n2:6000 rpm; Sealed Speed Rating n3:4500 rpm; |
| SX011820 Cross Roller Bearing 100x125x13mm | da min.:147 mm; D3:206 mm; Limiting speed:600 r/min; C1:83.2 mm; Snap ring in accordance with DIN 471:210x5; -:0.2 mm; Fatigue load limit Pu:127 kN; d1 ≈:167 mm; C:94 mm; |
| CAT320L Slewing Bearing | Mass inner ring:0.013 kg; F:16 mm; B:20 mm; r, r1,2 min.:0.3 mm; d:12 mm; |
| XR496052 Crossed Roller Bearing 203.2x279x31.75mm | Basic Dynamic Radial Load Rating C:111000 N; Oil Speed Rating Open/Shielded n2:3600 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; B:33.00 mm; d:140.000 mm; Accessories:Snap-Ring; D:210.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:108000 N; Sealed Speed Rating n3:1800 rpm; |
| RE 11015 UU Crossed Roller Bearing 110x145x15mm | Permissible angular misalignment α:2.5 °; d:55 mm; Calculation factor Y1:3.3; D:110 mm; Basic dynamic load rating C:31.2 kN; Calculation factor Y2:5.1; d3:80 mm; D1 ≈:95.6 mm; Fatigue load limit Pu:0.62 kN; B:22 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
VLU200744ZT Four Contact Ball Slewing Ring 634x848x56mm Video