No. | Brand | C | K | A | T | a | G | h | b |
40x36 | - | - | - | - | - | - | - | - | - |
6215LLBNR/2A | NTN | - | - | - | - | - | - | - | - |
6203LLU | NTN | - | - | - | - | - | - | - | - |
Ex300 | Hitachi | - | - | - | - | - | - | - | - |
A2F | - | - | - | 114.3 mm | - | - | - | - | - |
GR400 | - | - | - | - | - | - | - | - | 6 mm |
1000 | fag | - | - | - | - | - | - | - | - |
18Mm | - | - | - | - | - | - | - | - | 3 mm |
Ms900 | - | 17 mm | - | - | 21.75 mm | 20 mm | - | - | - |
ZK04 | - | - | - | - | - | - | - | - | - |
18mm/21mm | - | - | - | - | - | - | - | - | - |
20x27x4mm | - | - | - | - | - | - | - | - | - |
tc1730 | - | - | - | - | - | - | - | - | - |
EM1 | - | - | - | - | - | - | - | - | - |
Sk200-8 | - | - | - | - | - | - | - | - | - |
NJ348MA | - | - | - | - | - | - | - | - | - |
17x35x7 | - | - | - | - | - | - | - | - | - |
7211BECBP | SKF | - | - | - | 40 mm | - | - | - | - |
11 | INA | - | - | - | - | - | - | - | - |
(45%) | - | - | - | - | - | - | - | - | - |
EX100 | INA | - | - | - | - | - | - | - | - |
155 | NTN | - | - | - | - | - | - | - | - |
FH-846 | INA | - | - | - | - | - | - | - | - |
NRXT12020DD Crossed Roller Bearing 120x170x20mm | B2 B Dynamic (Cr):mm; d:540 mm; D:980 mm; B1:mm; Oil:3384.640 kN; D1:717 mm; Limiting speed for lubrication with:0 min-1; Grease:51000 kN; Static (Cor):mm; Pu:12180 kN; |
65 mm x 120 mm x 23 mm 120.32.1800 Slewing Bearing | Cap bolt recommended tightening torque:813.5 N·m; End plug (suffix Y):EPR 27; da:125.412 mm; A2:193.675 mm; ba:61.119 mm; RG:3/4 NPT; Adapter sleeve assembly:SNW 28x4.15/16; Housing:SAFS 528; P90°:180 kN; Stabilizing ring:SR-28-0; Size (mm):65 mm x 120 mm x 23 mm ; |
HS6-29E1Z External Gear Bearing | Fatigue load limit Pu:204 kN; Limiting speed:1900 r/min; K:9 mm; Calculation factor Y2:3.3; Calculation factor e:0.31; d1:180 mm; b:16.7 mm; d3:250 mm; d2 ≈:231 mm; r1,2 min.:3 mm; |
MTO-065 Slewing Bearings(65x135x22mm) (2.559x5.315x0.866inch) Without Gear | Basic Static Radial Load Rating Co:193000 N; Oil Speed Rating n2:3800 rpm; B:74.00 mm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Grease Speed Rating n1:2700 rpm; d:65.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:212000 N; |
RE 10016 UU Crossed Roller Bearing 100x140x16mm | ra max.:3 mm; d:80 mm; Da min.:114 mm; Mass bearing:1.77 kg; rb max.:2.5 mm; Dimension series:M 515600; Limiting speed:4800 r/min; d1 ≈:104.95 mm; db min.:93 mm; Calculation factor Y0:0.8; |
Excavator Bearing PC30-2 | Basic Static Radial Load Rating Co:32500 N; Fillet Radius ra:1.00 mm; D:150.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:29100 N; B:16.00 mm; Accessories:One Seal; d:120.000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; |
Excavator Slewing Ring For KOMATSU PC200LC-7, Part Number:20Y-25-21200 | Limiting speed:10000 r/min; Calculation factor Y:1.1; db min.:40 mm; Fatigue load limit Pu:7.8 kN; B:22.28 mm; r3,4 min.:1.6 mm; Reference speed:8000 r/min; Calculation factor Y0:0.6; Da min.:54 mm; d:30.162 mm; |
RK6-22N1Z Slewing Bearings (17.6x25.51x2.205inch) With Internal Gear | E:133.8 mm; F:102 mm; Static (Coa):131 kN; s:2 mm; D:150 mm; rs (min):2 mm; B:28 mm; Pu:15.130 kN; Dynamic (Ca):121 kN; b1:14 mm; |
10-20 0311/0-32002 Ball Slewing Rings 7.5x17x2.205inch | Lock nut:N 056; Locking plate:PL 56; B5:47.092 mm; B1:156.997 mm; G:279.502 mm; d3 max.:330.327 mm; Threads per inch:6; B:38.354 mm; Mass adapter sleeve assembly:20.5 kg; Sleeve:S 3056x10.7/16; |
RB40035UUC0 High Precision Cross Roller Ring Bearing | B:30.20 mm; Oil Speed Rating n2:8500 rpm; Accessories:Shield & Seal & Snap; Basic Dynamic Radial Load Rating C:41600 N; Sealed Speed Rating n3:6300 rpm; d:30.000 mm; Fillet Radius ra:1.00 mm; D:72.0000 mm; Basic Static Radial Load Rating Co:29000 N; Grease Speed Rating n1:6300 rpm; |
VLU200844 Four Contact Ball Slewing Ring 734x948x56mm Video