| No. | Brand | C | K | A | T | a | G | h | b |
| Ka025xp3k | Kaydon | - | - | - | - | - | - | - | - |
| 02-20-2515 | - | - | - | - | - | - | - | - | 9 mm |
| 1X | - | - | - | - | - | - | - | - | - |
| [20 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | 22.3 mm |
| CW50 | - | 16 mm | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| (9mm/12mm/15mm/17mm/18mm/21mm) | - | - | - | - | - | - | - | - | - |
| SET118 | Timken | - | - | - | 34 mm | - | - | - | - |
| 99% | - | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 2mm-30mm | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| ME202620 | INA | - | - | - | - | - | - | - | - |
| pc200 | INA | - | - | - | - | - | - | - | - |
| 2x | TRW | - | 4.5 mm | - | - | - | - | - | 8.3 mm |
| VN1500 | NTN | - | - | - | - | - | - | - | - |
| 1988-1994 | Timken | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | mm |
| 2019 | - | - | - | - | - | - | - | - | mm |
| RD400E/F | NTN | - | - | - | - | - | - | - | - |
| EM1 | - | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| 38X30 | - | - | - | - | - | - | - | 79.375 mm | - |
| 40-80 | - | - | - | - | - | - | - | - | - |
| As6669 | - | - | - | - | - | - | - | - | - |
| CRBE 09025 B Cross Roller Bearing 90x210x25mm | da:266.7 mm; P120°:169 kN; Pa:89 kN; Cap bolt recommended tightening torque:1017 N·m; PosiTrac Plus contact element:2 x B10724-607; Initial grease fill:3515.4 g; Ca:147.803 mm; Cap bolt:4 x 1 1/2-6 UNC; Appropriate attachment bolt size G:1.5 in; ba:100.806 mm; |
| 7787/1310G Bearing 1310x1600x140mm | r2s (min):0.3 mm; Static (Coa):87.4 kN; C:15.5 mm; rs (min):1 mm; B:20 mm; Dynamic (Ca):59.6 kN; a:18 mm; d2:50 mm; r1s (min):1 mm; D:80 mm; |
| 35 mm x 72 mm x 23 mm 9169646 Swing Bearing For HITACHI ZX200LC Excavator | B:14 mm; Grease:10 600 min-1; Bearing designation:6007 ; rs:1 mm; Oil:12 600 min-1; Dynamic (Cr):15.956 kN; Weight:0.154 kg; Static (Cor):10.328 kN; Pu:0.469 kN; ra:1 max; Size (mm):35 mm x 72 mm x 23 mm ; |
| XU060111 Crossed Roller Slewing Bearings 76.2x145.79x15.87mm | d:85 mm; Mass shaft washer:1.27 kg; r1,2 min.:1.5 mm; B:13.5 mm; d1:150 mm; |
| RE14016 Crossed Roller Bearings 140x175x16mm | H1:57.15 mm; P180°:8.01 kN; H:112.713 mm; Adapter sleeve assembly:SNW 9x1.7/16; A2:88.9 mm; PG:1/8 NPT; Ventilation fitting:38174-12; S:2.778 mm; Mass pillow block:5.28 kg; J min.:158.75 mm; |
| VLI200844-N Slewing Bearing S-upplier Made In China 736x948x56mm | Ca:130 mm; A1:230 mm; J1:130 mm; Cap bolt, rec. tightening torque:350 N·m; H1:210 mm; Q150°:1040 kN; N:42 mm; Oil seal:TSD 3044 U; Da:340 mm; J6:560 mm; |
| A8-22E6 Four Point Contact Ball Slewing Bearing With External Gear | Limiting speed:4800 r/min; Basic static load rating C0:19 kN; J:101.5 mm; Bearing:YAR 208-107-2F; DN:6.5 mm; R1:25.5 mm; Da:115.9 mm; B:49.2 mm; Housing:FY 508 M; Recommended tightening torque for grub screw:6.5 N·m; |
| HS6-43E1Z Slewing Bearings (38.75x46.87x2.2inch) With Internal Gear | PG:1/4 NPT; RG:3/8 NPT; H:222.25 mm; Adapter sleeve assembly:SNW 20x3.1/2; J1:60.325 mm; J min.:295.275 mm; N1:22.225 mm; Bearing:22220 EK; P60°:175 kN; Ca:55.804 mm; |
| RE15030 Cross Roller Bearings,RE15030 Bearings150x230x30mm | B:25.40 mm; Basic Static Radial Load Rating Co:20000 N; d:20.000 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:23800 N; |
| SX011848 Cross Roller Bearing 240x300x28mm | J6:98.5 mm; H:141.5 mm; Db1:77 mm; Db2:83 mm; Thread grub screw G2:1/4-28 UNF; A5:20 mm; N4:2 mm; Recommended tightening torque for grub screw:4 N·m; Basic static load rating C0:11.2 kN; A:32.5 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
VLU300955 Four Contact Ball Slewing Ring 805x1100x90mm Video