| XR820060 Cross Roller Bearing 580x760x80mm | Limiting speed:11000 r/min; da min.:44.2 mm; d1:35 mm; ra max.:1 mm; G:M 45x1.5; Reference speed:8000 r/min; Basic static load rating C0:86.5 kN; B:23 mm; da max.:52.4 mm; Da max.:73 mm; |
| RB25040UUCC0 High Precision Cross Roller Ring Bearing | rb max.:3.3 mm; Reference speed:7000 r/min; Basic static load rating C0:106 kN; d1 ≈:59.3 mm; Fatigue load limit Pu:11.8 kN; D:76.2 mm; da max.:44 mm; r1,2 min.:3.5 mm; Calculation factor Y0:0.6; B:28.575 mm; |
| XR889059 Crossed Roller Bearing 1028.7x1327.15x95.25mm | B:32 mm; α:7 °; l7 min.:50 mm; h:163 mm; C1 max.:28 mm; G:M 42x3; dk:60 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; l1 min.:92 mm; |
| 010.20.200 Slewing Bearing | D:736.6 mm; Basic dynamic load rating C:4290 kN; Fatigue load limit Pu:815 kN; Calculation factor Y0:1.8; D1 ≈:707 mm; r3,4 min.:1.5 mm; a:255 mm; Thrust factor K:1.69; d:558.8 mm; Basic static load rating C0:11600 kN; |
| RE 6013 Crossed Roller Bearing 60x90x13mm | s:2 mm; d2:95 mm; Pu:28.720 kN; b:mm; rs (min):3 mm; E:173.5 mm; F:122 mm; Dynamic (Ca):256 kN; r1s (min):3 mm; Static (Coa):266 kN; |
| 060.20.0844.500.01.1503 Slewing Ring Bearings For Turntables | L:244.475 mm; Cap bolt recommended tightening torque:81.3 N·m; Mass pillow block:7.85 kg; H1:69.85 mm; Bearing:22211 EK; Initial grease fill:39.69 g; J max.:209.55 mm; Ventilation fitting:38174-12; P90°:27.1 kN; Cap bolt, SAE grade:5; |
| 1797/1300G2 Slewing Beairng | P90°:107 kN; Ca:62.89 mm; H1:125.425 mm; PosiTrac Plus contact element:2 x B10724-109; P180°:72.5 kN; Eye bolt:2 x 3/8-16 UNC; Stabilizing ring:SR-22-19; Labyrinth ring:2 x LOR 109; Cap bolt:5/8-11 UNC; P150°:59.6 kN; |
| VSI200944N Slewing Bearings (840x1016x56mm) Turntable Ring | K:3 mm; Cb min.:8.5 mm; r5 min.:1 mm; rc max.:1 mm; Db min.:161 mm; Limiting speed:3800 r/min; db min.:108.5 mm; Basic static load rating C0:780 kN; ra max.:3 mm; Mass bearing pair:8.99 kg; |
| RB22025 Precision Cross Roller Bearing | RG:1/2 NPT; PosiTrac Plus contact element:2 x B10724-109; Mass pillow block:69.3 kg; h:61.119 mm; ba:63.5 mm; Ca:89.789 mm; da:95.25 mm; Initial grease fill:382.73 g; Bearing:22322 EK; J max.:406.4 mm; |
| 9129521 Swing Bearing For HITACHI EX450LC-5 Excavator | D:160.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; Grease Speed Rating n1:2400 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:151000 N; Basic Static Radial Load Rating Co:193000 N; |