| RE 11020 UU Crossed Roller Bearing 110x160x20mm | Travel:12; Height G:2.938 in; Bolt Pattern E:15 1/2 in; Frame Size A:4 1/8 in; Bolt Pattern D:2 1/4 in; Length H:0.500 in; Frame Accepts These Shaft Sizes (Bearing Bore):20 mm, 25 mm; Bolt Pattern C:0.55 in; Frame Size B:17 in; Shaft C/L Distance F:1 2/5 in; |
| 2425U262F1 Swing Bearing For KOBELCO SK270LC IV Excavator | Adapter sleeve assembly:SNW 3034x5.13/16; PG:1/4 NPT; H:298.45 mm; P180°:127 kN; Cap bolt recommended tightening torque:813.5 N·m; da:147.637 mm; H1:152.4 mm; Ca:86.614 mm; Bearing:23034 CCK/W33; H2:60.325 mm; |
| Slewing Bearing For Komatsu PC400-5 Excavator | Da:210 mm; P120°:94.3 kN; A1:120.65 mm; P60°:249 kN; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 3028x5; Cap bolt recommended tightening torque:298.3 N·m; Ca:72.619 mm; Cap bolt:5/8-11 UNC; Bearing limiting speed:3400 r/min; |
| 111.40.2000 Slewing Bearing | Mass bearing:1.28 kg; da min.:53 mm; D1 ≈:86.95 mm; Calculation factor kr:0.035; r1,2 min.:2 mm; Snap ring:SP 110; Ca max.:5.74 mm; Da max.:97 mm; Calculation factor f0:12; Basic static load rating C0:36.5 kN; |
| VRT 2050A Cross Roller Table 30x50x12mm | rb max.:2 mm; da min.:82 mm; D:150 mm; Reference speed:4300 r/min; ra max.:2 mm; F:89 mm; Fatigue load limit Pu:24.5 kN; d:70 mm; Mass bearing:2.15 kg; db min.:92 mm; |
| 42 mm x 80 mm x 45 mm 9E-1B75-1641-0753 Four Point Contact Ball Slewing Ring | A:9 mm; d:360 mm; Mass withdrawal sleeve:20 kg; G2:G 1/4; Nut for removal:HM 3176; G:Tr 380x5; B1:206 mm; B2:226 mm; Hydraulic nut:HMV 76 E; d1:340 mm; Size (mm):42 mm x 80 mm x 45 mm ; |
| 023.40.1800 Slewing Bearing | dk:49.2 mm; Design (sliding contact surface combination):Steel/steel; Material constant KM:330; r2 min.:1 mm; D:55.563 mm; Specific static load factor K0:300 N/mm²; C:26.187 mm; Da max.:51.7 mm; r1 min.:0.6 mm; B:30.15 mm; |
| MTO-065 Heavy Duty Slewing Ring Bearing | ba:72.231 mm; Housing:SAF 326; Cap bolt, SAE grade:5; L:558.8 mm; P60°:226 kN; J max.:488.95 mm; J1:95.25 mm; J min.:441.325 mm; A2:288.925 mm; Lock washer:W 26; |
| 024.60.3550 Slewing Bearing | Fillet Radius rb:1.00 mm; D:380.0000 mm; Basic Static Radial Load Rating Co:1270000 N; d:180.000 mm; B:150.00 mm; Basic Dynamic Radial Load Rating C:780000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1300 rpm; Oil Speed Rating n2:1600 rpm; |
| 130.32.1120 Slewing Bearing | Max. speed for PosiTrac Plus seal:1950 r/min; Labyrinth ring:2 x LOR 52; Ca:45.796 mm; Adapter sleeve assembly:SNW 17x2.7/8; PG:1/8 NPT; J1:53.975 mm; RG:3/8 NPT; End plug (suffix Y):EPR 9; R2:22.225 mm; L:330.2 mm; |