| R8-49N3 Crossed Roller Slewing Rings With Internal Gear | B:72 mm; Limiting speed:1800 r/min; r3,4 min.:4 mm; Da min.:307 mm; Basic static load rating C0:1340 kN; rb max.:4 mm; Ca min.:9 mm; C:62 mm; Calculation factor Y:1.7; a:65.899 mm; |
| 020.40.1250 Slewing Bearing | Dimension D2:2.7500 in; Insert Bearing IB:ZMaRC; Weight W:1.40 lb; Dimension N:0.7813 in; Dimension H:1.1563 in; Pin Dia A1:0.5313 in; Dimension J:1.6250 in; Dimension B:4.1250 in; Basic Dynamic Radial Load Rating:4380 lbf; Width A:1.6250 in; |
| RKS.21 0541 Light Series Four-point Contact Ball Slewing Bearing With External Gear | D1 ≈:1077 mm; r1,2 min.:9.5 mm; Mass bearing:1802 kg; B:365 mm; Operating clearance factor k2:0.094; d:750 mm; Ca min.:9.3 mm; Da max.:1180 mm; D:1220 mm; Fatigue load limit Pu:1800 kN; |
| Crossed Roller Bearings XSA141094-N 1024x1198.1x56mm | Design (sliding contact surface combination):Steel/steel, heavy-d; da max.:130.5 mm; r2 min.:1.1 mm; d:114.3 mm; Da min.:157 mm; B:100 mm; M:8 mm; Basic static load rating C0:3400 kN; Specific dynamic load factor K:100 N/mm²; D:177.8 mm; |
| VA 160235-N Four Point Contact Slewing Ring Slewing Bearing | P60°:101 kN; Ca:49.809 mm; Housing:FSAF 518; P120°:38.3 kN; L:349.25 mm; Mass pillow block:21.3 kg; PosiTrac Plus contact element:2 x B10724-188; A2:149.225 mm; da:79.375 mm; P150°:34.7 kN; |
| L6-25P9Z Four-point Contact Ball Slewing Bearings | Stabilizing ring:2 x 38151-38; J max.:488.95 mm; End plug (suffix Y):EPR 21; P150°:78.3 kN; P180°:94.3 kN; PG:1/4 NPT; N1:28.575 mm; Pa:40 kN; Cap bolt, SAE grade:5; Ca:89.789 mm; |
| CRBE 09025 B Cross Roller Bearing 90x210x25mm | da:266.7 mm; P120°:169 kN; Pa:89 kN; Cap bolt recommended tightening torque:1017 N·m; PosiTrac Plus contact element:2 x B10724-607; Initial grease fill:3515.4 g; Ca:147.803 mm; Cap bolt:4 x 1 1/2-6 UNC; Appropriate attachment bolt size G:1.5 in; ba:100.806 mm; |
| RA5008 Crossed Roller Bearings 50x66x8mm | Grease:6 300 min-1; Static (Cor):25.100 kN; Da:93 max; ra:1 max; D:100 mm; Pu:1.141 kN; Dynamic (Cr):30.500 kN; Weight:0.437 kg; d:65 mm; B:18 mm; |
| 65 mm x 120 mm x 41 mm 9112188 Swing Bearing For HITACHI EX300LC-3C Excavator | Accessories:Without Accessories; Fillet Radius ra:1.50 mm; d:45.000 mm; Basic Static Radial Load Rating Co:46500 N; Oil Speed Rating Open/Shielded n2:7000 rpm; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Dynamic Radial Load Rating C:59400 N; B:25.00 mm; Size (mm):65 mm x 120 mm x 41 mm ; |
| 797/600G2 Bearing 600x900x125mm | RG:3/8 NPT; J max.:333.375 mm; H2:44.45 mm; End plug (suffix Y):EPR 10; Da:180 mm; H1:114.3 mm; L:387.35 mm; da:76.2 mm; ba:52.388 mm; Stabilizing ring:2 x SR-1617; |