| No. | Brand | C | K | A | T | a | G | h | b |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 71848 | - | - | - | - | - | - | M 56x4 | 235 mm | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 81106-TV | INA | - | - | - | - | - | - | - | - |
| 692XM | NSK | - | - | - | - | - | - | - | - |
| 9G-7641 | - | - | - | - | - | - | - | - | - |
| 332 | - | - | - | - | - | - | - | - | - |
| NUP2210 | - | - | - | - | - | - | - | - | - |
| XB9S | NTN | 52.375 mm | - | - | - | - | - | - | - |
| 250PSI | Parker | - | - | - | - | - | - | - | - |
| 57135-000 | Parker | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 708-2G-00024 | - | - | - | - | - | - | - | - | - |
| WA380-3 | INA | - | - | - | - | - | - | - | - |
| (ZH3938) | - | - | - | - | - | - | - | - | - |
| Mk4 | - | - | - | - | - | - | - | - | - |
| (SB-PTS07) | - | - | - | - | - | - | - | - | - |
| 7308BEGB4 | SKF | - | - | - | - | - | - | - | - |
| 1996-2000 | - | 13 mm | - | - | - | - | - | - | - |
| 6205N | fag | - | - | - | - | - | - | - | - |
| 7012CEGAT/VQ253 | - | - | - | - | - | - | - | - | - |
| 7Y-1798 Swing Bearing For Caterpillar 350L Excavator | Mass bearing:115 kg; da max.:290 mm; Fatigue load limit Pu:335 kN; Limiting speed:2000 r/min; Calculation factor kr:0.2; B:145 mm; da min.:240 mm; r1,2 min.:5 mm; D:460 mm; d:220 mm; |
| Crossed Roller Bearings XSA140544-N Standard Series 14, External Gear Teeth, Lip Seals On Both Sides | Mass needle roller and cage assembly:0.002 kg; Fatigue load limit Pu:0.54 kN; Basic dynamic load rating C:4.84 kN; Reference speed:30000 r/min; Basic static load rating C0:4.75 kN; U:10 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 8x12x3; Fw:8 mm; Limiting speed:34000 r/min; Ew:12 mm; |
| VRT 2035A Cross Roller Table 30x35x12mm | Eye bolt:2 x 1/2-13 UNC; L:711.2 mm; P120°:107 kN; Ca:101.803 mm; H:401.637 mm; da:176.213 mm; J max.:619.125 mm; Appropriate attachment bolt size G:1.25 in; P90°:173 kN; J1:114.3 mm; |
| CSG(CSF)-32 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | N1:19.05 mm; H2:28.575 mm; Da:130 mm; da:61.913 mm; PosiTrac Plus contact element:2 x B10724-37; Pa:5.65 kN; J max.:244.475 mm; Adapter sleeve assembly:SNW 15x2.7/16; H:157.559 mm; Mass pillow block:13.1 kg; |
| A8-19E5A Four Point Contact Ball Slewing Bearing With External Gear | d:170 mm; Effective load carrying cross section A:20060 mm²; Tolerance shaft:h8; Tolerance housing:H7; D:190 mm; Coefficient of friction µ max.:0.08; Specific static load factor K0:200 N/mm²; Specific dynamic load factor K:140 N/mm²; B:120 mm; Coefficient of friction µ min.:0.03; |
| CRBA14025 Crossed Roller Bearing (140x200x25mm) Industrial Robots Use | da max.:759 mm; s1 max.:48.1 mm; Operating clearance factor k2:0.104; d2 ≈:716 mm; Da max.:892 mm; d:630 mm; D1 ≈:840 mm; Ca min.:2.9 mm; da min.:658 mm; Limiting speed:670 r/min; |
| SX011840 Cross Roller Bearing 200x250x24mm | L:209.55 mm; Adapter sleeve assembly:SNW 10x1.5/8; P60°:28.9 kN; h:28.575 mm; Stabilizing ring:SR-10-8; Bearing:1210 EKTN9; Cap bolt recommended tightening torque:61 N·m; da:41.275 mm; A2:165.1 mm; Mass pillow block:5.9 kg; |
| RB30040 Cross Roller Bearing 300x405x40mm | Mass bearing:217 kg; Calculation factor e:0.33; Calculation factor Y0:2; Calculation factor Y2:3; D1 ≈:442 mm; Comparative axial load rating CFa:216 kN; d1 ≈:377 mm; Fatigue load limit Pu:1020 kN; r3,4 min.:3.3 mm; Basic dynamic load rating C:5280 kN; |
| RB20035 Cross Roller Bearing 200x295x35mm | B:32 mm; Lock nut:KMFE 32; d:160 mm; G:M 160x3; Mass adapter sleeve assembly:5.1 kg; d1:140 mm; d3:210 mm; Hydraulic nut:HMV 32 E; B1:93 mm; |
| 40 mm x 90 mm x 23 mm LC40F00009F1 Swing Bearing For KOBELCO SK290LC-6E Excavator | Weight:0.597 kg; rs:1.5 mm; Static (Cor):29.397 kN; Grease:6 700 min-1; D:100 mm; da:62 min; d:55 mm; B:21 mm; Pu:1.336 kN; ra:1.5 max; Size (mm):40 mm x 90 mm x 23 mm ; |
231.21.0875.013 Four Contact Ball Slewing Ring 735x950.4x56mm Video