No. | Brand | C | K | A | T | a | G | h | b |
6305 | - | - | - | - | - | - | - | - | - |
33210 | - | - | - | - | - | - | - | - | - |
CR808XPND; | - | - | - | - | - | - | - | - | - |
100 | - | - | - | - | - | - | - | - | - |
9mm | - | - | - | - | - | - | - | - | - |
2k | - | - | - | - | - | 16.111 mm | - | - | - |
PC78US-5 | INA | - | - | - | - | - | - | - | - |
DH220-5 | - | - | - | - | - | - | - | - | - |
+0.5mm | - | - | - | - | - | - | - | - | - |
20X32X7TC-BX | - | - | - | - | - | - | - | - | - |
pc200-7 | INA | - | - | - | - | 12.5 mm | - | - | - |
Mmfo25c | - | - | - | - | - | - | - | - | - |
900 | NTN | - | - | - | - | - | - | - | - |
N21%Min | - | - | - | - | - | - | - | - | - |
1.3mm | - | - | - | - | - | - | - | - | - |
212140106001 | - | 46 mm | - | - | - | - | - | - | - |
21308KC3 | fag | - | - | - | - | 228 mm | - | - | - |
NSR250 | - | - | - | - | - | - | 129.692 mm | - | - |
250 | fag | - | - | - | - | - | - | - | - |
99.5% | INA | - | - | - | - | - | - | - | - |
6203LLU | NTN | - | - | - | - | - | - | - | - |
G10 | - | - | - | - | - | - | - | - | - |
24v | - | - | - | - | - | - | - | - | - |
7783-20-2 | - | 52.375 mm | - | - | - | - | - | - | - |
18mm | - | - | - | - | 29.25 mm | - | - | - | - |
SK200-3 | - | - | - | - | - | - | - | - | - |
A11VO75 | - | - | - | - | - | - | - | 165 mm | - |
VN1500 | NTN | - | - | - | - | - | - | - | - |
6313Z | fag | - | - | - | - | - | - | 38.1 mm | - |
121.25.630 Slewing Bearing | Permissible sliding velocity v min.:0 m/s; h:23 mm; B1:5 mm; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; D:32 mm; Tolerance housing:H7; B:20 mm; Mass bushing:0.092 kg; d:22 mm; |
KLK 650L Four Point Contact Ball Slewing Turntable Bearing | B:46.00 mm; Grease Speed Rating n1:1400 rpm; Oil Speed Rating n2:2400 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:242000 N; d:190.000 mm; Basic Static Radial Load Rating Co:315000 N; Fillet Radius ra:2.50 mm; D:300.0000 mm; |
XU120179 Cross Roller Bearing 140x300x36mm | Pu:14.270 kN; D:100 mm; r1s (min):1.5 mm; T:27.25 mm; Dynamic (Ca):104 kN; a:21 mm; rs (min):2 mm; r2s (min):0.6 mm; B:25 mm; C:22 mm; |
RB11012 Cross Roller Bearing | Oil Speed Rating Open/Shielded n2:7000 rpm; Sealed Speed Rating n3:3600 rpm; Basic Dynamic Radial Load Rating C:41000 N; Basic Static Radial Load Rating Co:32500 N; D:110.0000 mm; B:20.00 mm; Accessories:Snap-Ring; Fillet Radius ra:1.00 mm; d:70.000 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; |
1797/2635G2K1 Bearing 2635x3440x270mm | r3,4 min.:0.3 mm; Attainable speed for grease lubrication:22000 r/min; ra max.:1 mm; Fatigue load limit Pu:0.95 kN; Calculation factor f2D:1.09; Basic static load rating C0:22.4 kN; D2:68.3 mm; B:16 mm; Number of balls z:17; Preload class A GA:110 N; |
4789/930 Slewing Bearing | da max.:119 mm; Da min.:145 mm; Db min.:158 mm; db min.:123.5 mm; d:110 mm; Fatigue load limit Pu:37.5 kN; a:37.513 mm; Basic static load rating C0:355 kN; Basic dynamic load rating C:256 kN; r1,2 min.:3 mm; |
20Y-25-A1100 Swing Bearing For Komatsu PC220LC-6L Excavator | d3 max.:230.327 mm; Hydraulic nut:HMVC 36E; d:180 mm; Sleeve:S 136x6.3/8; d1:161.925 mm; B4:28.042 mm; Threads per inch:8; B:28.042 mm; Lock washer:W 36; Mass adapter sleeve assembly:10 kg; |
132.32.1120 Slewing Bearing | Calculation factor Y2:3.3; Fatigue load limit Pu:1120 kN; Design variant/feature:TDI.1/Y2; Comparative radial load rating CF:1700 kN; T:280 mm; r1,2 min.:3 mm; Basic static load rating C0:16600 kN; Basic dynamic load rating C:6820 kN; Thrust factor K:1.87; d1 ≈:636 mm; |
Crossed Roller Bearings XSA140544-N Standard Series 14, External Gear Teeth, Lip Seals On Both Sides | Mass needle roller and cage assembly:0.002 kg; Fatigue load limit Pu:0.54 kN; Basic dynamic load rating C:4.84 kN; Reference speed:30000 r/min; Basic static load rating C0:4.75 kN; U:10 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 8x12x3; Fw:8 mm; Limiting speed:34000 r/min; Ew:12 mm; |
Komatsu PC60-5 Excavator Slewing Bearing | G:Tr 360x5; G2:M 6; B:45 mm; d3:420 mm; d:360 mm; B5:58 mm; Locking device:MS 3072; d1:340 mm; Mass adapter sleeve assembly:26.2 kg; B1:144 mm; |
281.30.1200.013 Four Contact Ball Slewing Ring 1105x1398x90mm Video