| No. | Brand | C | K | A | T | a | G | h | b |
| (2) | - | - | - | - | - | - | - | - | - |
| PVQ13-A2R-SS1S-20-CM7D-12 | - | - | - | - | - | - | - | - | - |
| 7211C | - | 32 mm | - | - | - | 59.671 mm | - | - | - |
| 1-87610115-2 | - | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| 1700 | - | - | - | - | - | - | - | - | - |
| 2mm | - | - | - | - | - | - | - | - | - |
| 20x47x14 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 8.75" | koyo | - | - | - | - | - | - | - | - |
| WA380-3 | INA | - | - | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | 35 mm | - | - | - |
| )BDZ-155 | - | - | - | - | - | - | - | - | - |
| S6804-2RS | - | - | - | - | - | - | Tr 670x6 | 28 mm | 50 mm |
| 95% | - | - | - | - | - | - | - | - | - |
| #4607 | - | - | - | - | - | - | - | - | - |
| 10 | SKF | - | - | - | - | - | - | - | - |
| Chloride30% | - | - | - | - | - | - | - | - | - |
| 3mm/4mm | - | - | - | - | - | - | - | 50.8 mm | - |
| R200-7 | - | - | - | - | - | - | - | - | - |
| YZ80F | NTN | - | - | - | - | - | - | - | - |
| 1216 | NSK | - | - | - | - | - | - | - | - |
| Z250 | NTN | - | - | - | - | - | - | 28.575 mm | - |
| R385 | - | - | - | - | - | - | - | - | - |
| 51106 | - | - | - | - | - | - | - | - | - |
| 24100N7441F1 Swing Bearing For KOBELCO SK220LC IV Excavator | L:831.85 mm; Cap bolt recommended tightening torque:4284.4 N·m; J1:133.35 mm; Pa:81.4 kN; Housing:SAFS 052 KA; Ca:117.805 mm; P180°:285 kN; P150°:236 kN; A1:222.25 mm; H2:95.25 mm; |
| Cross Roller Bearing BFKB353251/HA4 Thrust Tapered Roller Bearing 950x1170x85mm | d:75 mm; db min.:107 mm; Limiting value e:0.2; F:95 mm; Axial load factor Y:0.6; Fatigue load limit Pu:33.5 kN; d1 ≈:104 mm; Basic static load rating C0:265 kN; ra max.:2 mm; Basic dynamic load rating C:280 kN; |
| VSI201094N Slewing Bearings (984x1166x56mm) Turntable Ring | Pu:2232.010 kg; d:1120 mm; Weight:2950 ; B1:335 mm; Dynamic (Cr):13965 kN; Static (Cor):39780 ; D:1540 mm; B:525 mm; Bearing designation:PLC 512-71 ; |
| NRXT8016E Crossed Roller Bearing 80x120x16mm | P90°:2900 kN; A1:310 mm; N:50 mm; ba max.:170 mm; Mass housing:301 kg; H:591 mm; H1:300 mm; bb:115.5 mm; Q180°:1430 kN; N1:42 mm; |
| 9E-1B30-0533-0947 Four Point Contact Ball Slewing Ring | Oil Speed Rating Open/Shielded n2:7000 rpm; Basic Static Radial Load Rating Co:34500 N; Basic Dynamic Radial Load Rating C:39100 N; Fillet Radius ra:1.00 mm; Accessories:One Shield & Snap-Ri; D:90.0000 mm; B:20.00 mm; d:50.000 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; |
| 1167/560K Bearing 560x720x36mm | da:125.412 mm; J min.:492.125 mm; R1:115.888 mm; PosiTrac Plus contact element:2 x B10724-122; Cap bolt, SAE grade:5; H:360.363 mm; J max.:549.275 mm; H2:69.85 mm; S:4.763 mm; P60°:234 kN; |
| RE40035 Cross Roller Bearings,RE40035 Bearings SIZE 400x480x35mm | Comparative axial load rating CFa:137 kN; B:128.588 mm; d:317.5 mm; d1 ≈:341 mm; Calculation factor e:0.31; Thrust factor K:1.83; Comparative radial load rating CF:440 kN; D1 ≈:382 mm; Fatigue load limit Pu:345 kN; Calculation factor Y0:2.2; |
| 206-25-00200 Swing Bearing For Komatsu PC220LL-6 Excavator | G:M 25x1.5; Lock nut:KMFE 5; B:10.5 mm; B1:29 mm; d3:38 mm; Mass adapter sleeve assembly:0.088 kg; d1:19.05 mm; d:25 mm; |
| YY40F00009F1 Swing Bearing For KOBELCO SK135SR-2 Excavator | Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4500 rpm; Oil Speed Rating n2:5300 rpm; B:26.00 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:39700 N; Basic Static Radial Load Rating Co:17000 N; d:80.000 mm; |
| RE40035 Cross Roller Bearing 400x480x35mm | H2:41.275 mm; P90°:60.9 kN; R1:60.325 mm; Bearing:22218 E; Cap bolt:2 x 5/8-11 UNC; End plug (suffix Y):EPR 11; Pa:27.1 kN; da:90 mm; Initial grease fill:141.75 g; S:4.763 mm; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
281.30.1475.013 Four Contact Ball Slewing Ring 1307x1598x90mm Video