No. | Brand | C | K | A | T | a | G | h | b |
Cartridge(220g) | - | - | - | - | - | - | - | - | - |
2pcs | - | - | - | - | - | - | - | - | - |
26mm | INA | - | - | - | 276.225 mm | - | - | - | - |
A100 | - | - | - | - | - | - | - | - | - |
MAG-33VP | INA | - | - | - | - | - | - | - | - |
120C | - | - | - | - | - | - | - | - | - |
209KDD | FAFNIR | - | - | - | - | - | - | - | - |
HC71911E.T.P4S.UL | - | 20 mm | - | - | 25.25 mm | 19 mm | - | - | - |
5 | - | 121 mm | 4 mm | - | - | - | - | - | - |
UCFS320 | NSK | - | - | - | - | - | - | - | - |
1220X2440mm | - | - | - | - | - | - | - | - | - |
RWU25E-L-RRF | INA | - | - | - | - | - | - | - | - |
H06CT/J05E/J08 | - | - | - | - | - | - | - | - | - |
6811 | - | - | - | - | - | - | - | - | - |
332 | - | - | - | - | - | - | - | - | - |
CBZ2063/2063 | - | - | - | - | - | - | - | - | - |
R166-2RS/C | - | - | - | 65 mm | - | - | - | - | - |
3M | - | - | - | - | - | - | - | - | - |
(DC-160) | - | - | - | - | - | - | - | - | - |
6mm | - | - | - | - | - | - | - | - | - |
R900705351 | Rexroth | - | - | - | - | - | - | 57.15 mm | - |
55 | - | - | - | - | - | - | - | - | - |
20x27x4 | - | - | - | - | - | - | - | - | mm |
4WRZ | Rexroth | - | - | - | - | 19.695 mm | - | - | - |
MKV23 | - | - | - | - | 91 mm | - | - | - | - |
9245698 Swing Bearing For HITACHI ZX350LC-3 Excavator | A1:210 mm; Mass housing:97.5 kg; N1:28 mm; Lock nut:KM 34; J1:120 mm; H2:80 mm; H:375 mm; Da:310 mm; Pa:710 kN; Q150°:1040 kN; |
797/1370G Slewing Bearing | Ca:107.798 mm; A2:295.275 mm; Labyrinth ring:2 x LOR 552; Stabilizing ring:2 x A8897; H1:209.55 mm; Eye bolt:2 x 1/2-13 UNC; Adapter sleeve assembly:SNP 3048x8.15/16; ba:89.694 mm; Bearing limiting speed:1900 r/min; P90°:334 kN; |
232.21.1075.013 Four Contact Ball Slewing Ring 986x1197x56mm | G:139.624 mm; Sleeve:S 128x4.7/8; B:24.079 mm; Lock nut:AN 28; B4:23.012 mm; Threads per inch:12; B1:134.95 mm; Mass adapter sleeve assembly:5.9 kg; d:140 mm; d3 max.:180.315 mm; |
134.50.4000.04K Slewing Beairng | s max.:4 mm; Limiting speed:1500 r/min; Mass bearing:74.5 kg; ra max.:3 mm; Da max.:524 mm; D:540 mm; Axial load factor Y:0.4; da max.:429 mm; r1,2 min.:4 mm; da min.:415 mm; |
NRXT4010E/ Crossed Roller Bearings (40x65x10mm) Industrial Robots Bearing | d:35 mm; C1 max.:22 mm; l1 min.:68 mm; G:M 36x3; d2 max.:84 mm; Mass rod end:1.3 kg; l2 max.:174 mm; l7 min.:40 mm; r1 min.:0.6 mm; Basic dynamic load rating C:120 kN; |
122.28.900 Slewing Bearing | Basic Dynamic Radial Load Rating C:255000 N; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:260000 N; d:80.000 mm; Fillet Radius ra:2.00 mm; B:78.00 mm; Grease Speed Rating n1:7000 rpm; D:170.0000 mm; Oil Speed Rating n2:10000 rpm; |
232.21.0875.013 Four Contact Ball Slewing Ring 738x947x56mm | B4:10 mm; s1:30.2 mm; Limiting speed1):2800 r/min; Rubber seating ring:RIS 208 A; Mass complete bearing:0.65 kg; Recommended tightening torque for grub screw:6.5 N·m; Basic dynamic load rating C:24.7 kN; r1,2 min.:1 mm; d1 ≈:51.8 mm; D:80 mm; |
PC200-8 Slewing Bearing | RG:3/8 NPT; Lock washer:W 18; Initial grease fill:286.33 g; db:104.775 mm; Labyrinth ring (dc shaft position):LOR 191; R2:27.781 mm; A1:98.425 mm; h:38.1 mm; Mass pillow block:20 kg; Appropriate attachment bolt size G:0.75 in; |
40 mm x 52 mm x 7 mm RB1250110UU High Precision Cross Roller Ring Bearing | D:210.0000 mm; Basic Static Radial Load Rating Co:335000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:3600 rpm; B:104.00 mm; Basic Dynamic Radial Load Rating C:307000 N; Fillet Radius rb:1.00 mm; d:85.000 mm; Grease Speed Rating n1:2000 rpm; Size (mm):40 mm x 52 mm x 7 mm ; |
RA11008 Cross Roller Bearing 110x126x8mm | Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; d:100.000 mm; Basic Static Radial Load Rating Co:134000 N; B:34.00 mm; Basic Dynamic Radial Load Rating C:127000 N; Oil Speed Rating Open/Shielded n2:3400 rpm; Accessories:Snap-Ring; D:180.0000 mm; |
280.30.1375.013 Four Contact Ball Slewing Ring 1207x1498x90mm Video