| No. | Brand | C | K | A | T | a | G | h | b |
| 99.5% | - | - | - | - | - | - | - | - | - |
| (50ml+50ml) | - | - | - | - | - | - | - | - | - |
| 28016-AA0308A | - | - | - | - | - | 2.381 mm | - | - | - |
| K1006550C | - | 43 mm | - | - | - | 44.387 mm | - | - | - |
| 3606 | fag | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | 51.594 mm | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 3mm/4mm/12mm | - | 28.575 mm | - | - | - | - | - | - | 4.8 mm |
| 90% | - | - | - | - | - | - | - | - | - |
| 12mm-18mm | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | 8 mm | - | - | Tr 600x6 | - | - |
| 14284 | Timken | - | - | - | - | - | - | 60.325 mm | - |
| 24 | Thomson | - | - | - | - | - | - | - | - |
| 33017 | Timken | - | - | - | - | - | M 160x3 | - | - |
| P5A-131-V09-AE-08-44 | Parker | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 0.50mm | - | - | - | - | - | - | - | - | - |
| V18S074 | - | - | - | - | - | - | - | - | - |
| (2 | - | - | - | - | - | - | - | - | - |
| 46%, | - | - | - | - | - | - | - | - | - |
| Slewing Ring For Excavator HITACHI ZX200-3, Part Number:9260971 | Static axial stiffness, preload class B:35 N/µm; Calculation factor f0:10.4; r3,4 min.:0.2 mm; Calculation factor f2B:1.04; Calculation factor fHC:1; d2:35.6 mm; Basic dynamic load rating C:7.15 kN; Basic static load rating C0:4.55 kN; Db max.:45.6 mm; Calculation factor f2A:1; |
| VLI 201094-N Four Point Contact Slewing Ring | B:9 mm; Weight:0.03 kg; Static (Cor):5.3 kN; Dynamic (Cr):8.2 kN; Bearing designation:PLC 03-29 ; Grease:18 000 min-1; D:35 mm; d:17 mm; Oil:21 000 min-1; Pu:0.240 kN; |
| SD.1600.32.00.C Four Contact Ball Slewing Ring 1305x1600x90mm | B:51.00 mm; d:200.000 mm; Basic Static Radial Load Rating Co:320000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:2300 rpm; D:310.0000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:238000 N; Grease Speed Rating n1:0 rpm; |
| Komatsu PC150-7 Excavator Slewing Bearing | Cap bolt:1-8 UNC; Housing:SAFS 536; J min.:530.225 mm; ba:75.406 mm; A1:180.975 mm; Eye bolt:2 x 3/8-16 UNC; Max. speed for Taconite seal:460 r/min; L:679.45 mm; End plug (suffix Y):EPR 19; P150°:173 kN; |
| 014.40.1250 Slewing Bearing | Ca:101.803 mm; h:61.913 mm; P90°:249 kN; Initial grease fill:1672.65 g; Eye bolt:2 x 1/2-13 UNC; H:398.462 mm; R1:120.65 mm; L:711.2 mm; Appropriate attachment bolt size G:1.25 in; Housing:SAFS 538; |
| 012.40.1000 Slewing Bearing | P150°:87.2 kN; End plug (suffix Y):EPR 27; Eye bolt:2 x 3/8-16 UNC; Cap bolt recommended tightening torque:298.3 N·m; P90°:149 kN; P120°:94.3 kN; da:123.825 mm; R1:79.375 mm; Stabilizing ring:2 x 36053-50; H:257.175 mm; |
| HS6-37N1Z Internal Gear Slewing Bearing | Fillet Radius ra:2.50 mm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:4300 rpm; Grease Speed Rating n1:3600 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:133000 N; Grease Speed Rating Open/Shielded n1:3600 rpm; B:41.00 mm; Basic Static Radial Load Rating Co:96500 N; Oil Speed Rating n2:4300 rpm; |
| RU 178 Crossed Roller Bearing 115x240x28mm | |
| RE 2008 Crossed Roller Bearing 20x36x8mm | Limiting speed:20000 r/min; Basic dynamic load rating C:29.2 kN; Fw:20 mm; Mass needle roller and cage assembly:0.032 kg; Reference speed:18000 r/min; Basic static load rating C0:39 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 20x28x4; U:25 mm; Ew:28 mm; Fatigue load limit Pu:4.9 kN; |
| Produce CRB40070 Crossed Roller Bearing,CRB40070 Bearing Size 400X580X70mm | G:M 160x3; G1:15 mm; d:150 mm; Mass withdrawal sleeve:1.15 kg; B2:77 mm; Hydraulic nut:HMV 32 E; d1:145 mm; B1:72 mm; Nut for removal:KM 32; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Excavator Slewing Ring For KOMATSU PC220-5, Part Number:20Y-25-11103 Video