No. | Brand | C | K | A | T | a | G | h | b |
ABEC-7 | - | - | - | - | - | - | - | - | - |
4X8 | INA | 3.71 mm | - | - | - | - | - | - | 3.1 mm |
HA594181 | Timken | - | - | - | - | - | - | - | - |
YZ80F | NTN | - | - | - | - | - | - | - | - |
HM516449C | Bower | 23.02 mm | - | - | - | 25.893 mm | - | - | - |
7306 | - | - | 9 mm | - | - | - | - | - | 16.7 mm |
6072 | - | - | 4.5 mm | - | - | - | - | - | - |
29585 | Timken | - | - | 15 mm | - | - | Tr 1060x8 | - | - |
+0.5mm | - | - | - | - | - | - | - | - | - |
400 | fag | - | - | - | - | - | - | 39.688 mm | - |
4 | - | - | - | - | - | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
2020 | - | - | - | - | - | - | - | - | - |
5cbm | - | - | - | - | - | - | - | - | - |
45 | - | - | - | - | - | - | - | - | - |
5tiers | - | - | - | - | - | - | - | - | - |
No.12125-02-9 | - | - | - | - | - | - | - | - | - |
7013 | NSK | - | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | - | - | - |
SA1V016/028/045/A10VSO | Rexroth | - | - | - | - | - | - | - | - |
HS6-43P1Z Slewing Bearing No Gear Teeth 38.75*47.18*2.2'' | Accessories:One Seal & Snap-Ring; Basic Static Radial Load Rating Co:47500 N; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:57200 N; Grease Speed Rating n1:4300 rpm; Fillet Radius ra:1.50 mm; D:100.0000 mm; B:33.30 mm; Sealed Speed Rating n3:4300 rpm; d:55.000 mm; |
122.40.2240 Slewing Bearing | Fillet Radius ra:1.00 mm; Oil Speed Rating n2:4200 rpm; Basic Dynamic Radial Load Rating C:95600 N; d:100.000 mm; Basic Static Radial Load Rating Co:127000 N; Grease Speed Rating n1:3600 rpm; D:140.0000 mm; Fillet Radius rb:0.60 mm; B:40.00 mm; |
RB13015 Cross Roller Bearings 130*160*15mm | Db max.:90.8 mm; Da max.:89 mm; Calculation factor f1:1; a:19.5 mm; Preload class A GA:92 N; rb max.:0.6 mm; Basic dynamic load rating C:17.2 kN; Reference grease quantity Gref:5.3 cm³; Calculation factor f2C:1.05; Static axial stiffness, preload class C:112 N/µm; |
021.25.2285.03 Bearing 2209x2420x90mm | Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:121000 N; Fillet Radius ra:2.00 mm; d:60.000 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:95000 N; B:57.20 mm; D:130.0000 mm; Oil Speed Rating n2:4500 rpm; |
XU080149 Crossed Roller Slewing Bearing | Appropriate attachment bolt size G:0.625 in; A1:79.375 mm; P90°:30.2 kN; H1:76.2 mm; Mass pillow block:10.5 kg; P150°:16 kN; P120°:17.8 kN; da:55.563 mm; Max. speed for contact seal:2600 r/min; Contact seal:2 x B9784-24; |
HD900-7 Slewing Bearing | B:10 mm; Mass shaft washer:1.12 kg; r1,2 min.:1.1 mm; d:180 mm; d1:222 mm; |
RB30025 Precision Cross Roller Bearing | Bolt Pattern C:0.55 in; Frame Size B:18 in; Travel:12; Bolt Pattern D:2 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern E:16 1/2 in; Height G:3.438 in; Frame Size A:4 41/64 in; Length H:0.500 in; Shaft C/L Distance F:1 27/32 in; |
134.50.3150.11K Slewing Beairng | r1,2 min.:6 mm; b:22.3 mm; B1:205 mm; B:165 mm; G1:38 mm; D1 ≈:633 mm; D:700 mm; K:12 mm; Da max.:677 mm; Calculation factor Y0:3.2; |
HS6-33E1Z Slewing Bearings (28.83x37.2x2.2inch) With Internal Gear | B5:125 mm; h:25 mm; d1:1025 mm; Lock washer / Locking clip:MS 30/950; b:60 mm; Mass lock nut:124 kg; Associated eyebolt for handling:M 16; B:100 mm; d2:985 mm; G:Tr 950x8; |
2789/2240G2 Slewing Bearing | Preload class A GA:200 N; Calculation factor e:0.68; Number of balls z:25; D:110 mm; r1,2 min.:1.1 mm; Basic static load rating C0:17.3 kN; d:70 mm; Calculation factor (single, tandem) Y0:0.38; Calculation factor (back-to-back, face-to-face) Y1:0.92; dn:86.5 mm; |
Excavator Slewing Ring For PC600-6, Part Number:21M-25-11100 Video