No. | Brand | C | K | A | T | a | G | h | b |
2 | thk | - | - | 4 mm | - | - | Tr 400x5 | - | - |
6BG1 | - | - | - | - | - | - | - | - | - |
S6208-ZZ | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
Smr74zz | - | - | - | - | - | - | - | - | - |
6 | - | - | - | - | - | - | - | - | - |
250 | - | 61.9 mm | - | - | - | - | - | - | - |
19mm | - | - | - | - | - | - | - | - | - |
3/4 | - | - | - | - | - | - | - | - | - |
15 | thk | - | - | - | - | - | - | - | - |
1787 | - | - | - | - | - | 4 mm | - | 121.5 mm | - |
6702ZZ | - | - | - | - | - | - | - | - | - |
NJ218 | NSK | - | - | - | - | - | - | - | - |
2mm | - | - | - | - | - | - | - | - | - |
983061-U | Danfoss | - | - | - | - | - | - | - | - |
2 | INA | - | - | - | - | - | - | - | - |
1.5 | - | - | - | - | - | - | - | 54.769 mm | - |
1 | - | - | - | - | - | - | - | - | - |
2 | - | - | 3 mm | - | - | - | - | - | - |
6326-M-C/3 | - | - | - | - | - | - | - | - | - |
5 | - | 121 mm | 4 mm | - | - | - | - | - | - |
F0 | - | - | - | - | - | - | M 120x2 | - | - |
466, | John Deere | - | - | - | - | - | - | - | - |
1.6 | - | - | - | - | - | - | - | - | 7 mm |
25X52X15 | - | - | - | - | - | - | - | - | - |
4.0mm | - | - | - | - | - | - | - | - | - |
A10V | Rexroth | - | - | - | - | - | - | - | - |
1999-2004 | Timken | - | - | - | - | - | - | - | - |
KH-275P Slewing Bearings (23.5x31.7x2.5inch) Machine Tool Bearing | Basic Dynamic Radial Load Rating C:33200 N; D:85.0000 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Grease Speed Rating n1:7500 rpm; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; Basic Static Radial Load Rating Co:21600 N; Accessories:One Shield; Sealed Speed Rating n3:5000 rpm; |
787/1628G2 Slewing Bearing | Stabilizing ring:SR-16-13; RG:3/8 NPT; Lock nut:AN 16; Lock washer:W 16; H:174.625 mm; db:92.075 mm; P90°:82.7 kN; Labyrinth ring (dc shaft position):LOR 54; P60°:138 kN; Labyrinth ring (db shaft position):LOR 82; |
280.30.1475.013 Four Contact Ball Slewing Ring 1307x1598x90mm | Basic static load rating C0:28.5 kN; Basic dynamic load rating C:87.1 kN; B:46 mm; Reference speed:9500 r/min; D1 ≈:109.2 mm; d:60 mm; Calculation factor e:0.4; Limiting speed:7000 r/min; Da max.:118 mm; r1,2 min.:2.1 mm; |
RB1000110 Precision Cross Roller Bearing | Maximum static radial loads F0r max.:2650 kN; Fatigue load limit Pu:270 kN; K:10 mm; Maximum dynamic radial loads Fr max.:1900 kN; B:168 mm; D:520 mm; Basic dynamic load rating C:2090 kN; C:168 mm; H max.:157.445 mm; d:205 mm; |
3R8-79N9 Three Row Roller, Heavy-duty Slewing Ring With Internal Gear | B:106 mm; Calculation factor kr:0.2; Calculation factor Y:0.4; ra max.:4 mm; D:710 mm; Basic static load rating C0:6000 kN; Mass bearing:120 kg; Limiting speed:430 r/min; D1 ≈:648 mm; Db max.:692 mm; |
RE4510 Crossed Roller Bearings 45x70x10mm | P120°:160 kN; P180°:173 kN; J max.:708.025 mm; Housing:SAF 544; L:831.85 mm; A1:222.25 mm; Max. speed for Taconite seal:385 r/min; Cap bolt recommended tightening torque:400 N·m; Initial grease fill:2749.95 g; RG:1 NPT; |
Produce CRB15025 Crossed Roller Bearing,CRB15025 Bearing Size150X230x25mm | Grease Speed Rating Open/Shielded n1:34000 rpm; Oil Speed Rating Open/Shielded n2:40000 rpm; Basic Dynamic Radial Load Rating C:2510 N; Accessories:Two Shields; Sealed Speed Rating n3:19000 rpm; Basic Static Radial Load Rating Co:1120 N; Fillet Radius ra:0.30 mm; B:6.00 mm; D:22.0000 mm; d:10.000 mm; |
78868 Slewing Bearing 340x450x30mm | r, r1,2 min.:0.3 mm; d:12 mm; Mass inner ring:0.0061 kg; F:15 mm; B:12.5 mm; |
112.50.4500 Slewing Bearing | |
XU120222 Cross Roller Bearing Manufacturer 140x300x36mm | d1 ≈:113.29 mm; l:10 mm; Basic static load rating C0:570 kN; r5 min.:0.6 mm; b:6 mm; Calculation factor e:0.43; T:87 mm; a:76.455 mm; Fatigue load limit Pu:65.5 kN; Mass bearing pair:5.64 kg; |
Slewing Ring For Excavator HITACHI EX200-1, Part Number:9102727 Video