No. | Brand | C | K | A | T | a | G | h | b |
2MM204WICRDUL | FAFNIR | - | - | - | - | - | - | - | - |
22211 | SKF | - | - | - | - | - | - | - | - |
DBDH6P | Rexroth | - | - | - | - | - | - | - | - |
4" | - | - | - | - | - | - | - | - | - |
6204NR | - | - | - | - | - | - | - | - | - |
250 | fag | - | - | - | - | - | - | - | - |
EX200 | Hitachi | - | - | - | - | - | - | - | mm |
23080CCK/W33 | - | - | - | - | - | - | - | - | - |
Zx75 | Hitachi | - | - | - | - | - | - | - | - |
2008 | NSK | - | - | - | - | - | - | - | - |
16329 | IKO | - | - | - | - | - | - | - | - |
ZDR6DA2-43/25y | Rexroth | - | - | - | - | - | - | 60.325 mm | - |
220g | - | - | - | - | - | - | - | - | - |
9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
80% | - | - | - | - | - | - | 149.555 mm | - | - |
3mm | - | - | - | - | - | - | - | - | - |
18mm | INA | - | - | - | - | - | - | - | - |
4mm | - | - | - | - | - | - | - | - | - |
(Zhr277) | - | - | - | - | - | - | - | - | - |
6311 | - | - | - | - | - | - | - | - | - |
GSA2080 | - | - | - | - | - | - | - | - | - |
54w | - | - | - | - | - | - | - | - | - |
NK16/16 | INA | - | - | - | - | - | - | - | - |
3/4/6/9/12/15/18/25mm | - | - | - | - | - | - | - | - | - |
N21% | - | - | - | - | - | - | - | - | - |
6308/VA201 | SKF | - | - | - | - | - | - | - | - |
RKS.060.20.0844 Slewing Bearing Without Gear 772x916x56mm | Basic static load rating C0:21200 kN; Calculation factor Y0:2; Comparative radial load rating CF:1700 kN; Calculation factor Y2:3; r1,2 min.:1.5 mm; d1 ≈:586 mm; Design variant/feature:TQON/GW; Fatigue load limit Pu:1460 kN; Thrust factor K:1.76; D1 ≈:653 mm; |
RE25025 Cross Roller Bearing 250x310x25mm | B:17.00 mm; Basic Static Radial Load Rating Co:2600 N; D:42.0000 mm; Grease Speed Rating n1:12000 rpm; Basic Dynamic Radial Load Rating C:10800 N; Fillet Radius ra:1.00 mm; d:15.000 mm; |
XU050077 Cross Roller Bearings,XU050077 Bearings SIZE 40x112x22mm | D:111.125 mm; Mass plain bearing:2.4 kg; C:52.375 mm; Basic static load rating C0:1270 kN; Sealing solution:Triple-lip seals; Specific dynamic load factor K:150 N/mm²; Da min.:100.4 mm; Design (sliding contact surface combination):Steel/PTFE fabric; ra max.:0.6 mm; da max.:79.5 mm; |
D176792K3M Bearing 460x590x40mm | Nut for removal:HM 3048; G:Tr 240x4; Hydraulic nut:HMV 48 E; d:220 mm; G1:20 mm; G2:G 1/4; A:9 mm; Mass withdrawal sleeve:9.4 kg; B1:130 mm; d1:200 mm; |
Slewing Ring For Excavator HITACHI ZX240, Part Number:9245728 | Basic dynamic load rating C:365 kN; dk:80 mm; r1 min.:1 mm; C1 max.:39 mm; l3 min.:70 mm; w:70 mm; B:44 mm; h1:175 mm; l4 max.:246 mm; d4 ≈:82 mm; |
R8-46N3 Crossed Roller Slewing Rings With Internal Gear | Sealed Speed Rating n3:6300 rpm; Basic Static Radial Load Rating Co:11600 N; D:68.0000 mm; Grease Speed Rating Open/Shielded n1:9500 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Seals & Snap-Rin; d:40.000 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; Basic Dynamic Radial Load Rating C:20800 N; B:15.00 mm; |
91-32 1155/1-06135 Four-point Contact Ball Slewing Bearing With External Gear | Basic Radial Load Rating-Dynamic DC:39000 N; Basic Radial Load Rating-Static SCO:26000 N; Speed Rating-Open and Shielded-Grease OSG:19500 rpm; D:80.0000 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; Speed Rating-Open and Shielded-Oil OSO:28000 rpm; Fillet Radius rb:1.00 mm; Type:300-RDM Series (from; B:21.00 mm; |
PC400-8 Slewing Bearing | Adapter sleeve:OH 3144 HTL; Pa:1000 kN; bc:133.5 mm; Bearing (basic designation):C 3144 K; Locating ring:2 x FRB 10/370; Mass housing:138 kg; ba min.:100 mm; P55°:4000 kN; J:540 mm; H1:220 mm; |
RKS.161.14.0744 Cross Roller Slewing Bearing With External Gear | Accessories:Mast Guide Type- 308; Basic Interchange BCA:-; Basic Interchange NDH:-; Basic Interchange NSK:-; Basic Radial Load Rating-Dynamic DC:16400 lbf; Basic Interchange SPLIT:-; Basic Interchange MCGILL:-; Basic Interchange:-; Basic Radial Load Rating-Static SCO:62900 lbf; |
A14-25P1 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Tolerance shaft:h9; Permissible sliding velocity v min.:0 m/s; d:12 mm; B:10 mm; Specific dynamic load factor K:40 N/mm²; Mass bushing:0.00061 kg; D:14 mm; Permissible sliding velocity v max.:1 m/s; Coefficient of friction µ min.:0.06; Specific static load factor K0:80 N/mm²; |
Slewing Ring For Excavator HITACHI ZX330, Part Number:9166468 Video