| No. | Brand | C | K | A | T | a | G | h | b |
| 1pc | - | - | - | 9 mm | - | - | Tr 630x6 | - | - |
| 50lpm | - | - | - | - | - | - | - | - | - |
| 6200.2ZR.C3, | fag | - | - | - | - | - | - | - | - |
| Mag18vp-250 | INA | - | - | - | - | - | - | - | - |
| 200kg | - | - | - | - | - | - | 74.498 mm | - | - |
| NK17/20 | SKF | - | - | - | - | - | - | - | - |
| 7803-63-6 | - | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| 12B38T | - | - | - | - | - | - | - | - | - |
| 15X32X9 | - | - | - | - | - | - | - | - | - |
| SDA16 | - | - | - | - | - | - | - | - | - |
| MBK2085 | - | - | - | - | - | 12.2 mm | - | - | - |
| 320x440x90 | - | - | - | - | - | - | - | - | - |
| N43W | - | - | - | - | - | - | - | - | - |
| BSS4476-2RZ | - | - | - | - | - | - | - | - | - |
| F12-060 | Parker | - | - | - | - | - | - | - | - |
| 500cc | - | - | - | - | - | - | - | - | - |
| S6804-2RS | - | - | - | - | - | - | Tr 670x6 | 28 mm | 50 mm |
| 8 | - | - | - | - | - | - | - | - | - |
| 5~6 | - | - | - | - | - | - | - | - | - |
| 25Z246-D6 | NSK | - | - | - | - | - | - | - | - |
| 41.250515 | Nachi | 17.5 mm | - | - | - | - | - | - | - |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| RB80070 Cross Roller Bearing 800x950x70mm | P90°:82.7 kN; A2:133.35 mm; Da:140 mm; Mass pillow block:21.3 kg; Cap bolt, SAE grade:8; Cap bolt:2 x 5/8-11 UNC; Labyrinth ring:2 x LOR 43; R1:53.181 mm; PG:1/8 NPT; End plug (suffix Y):EPR 8; |
| VU360680 Slewing Bearings (565x795x79mm) Machine Tool Bearing | Mass rod end:14.5 kg; l1 min.:147 mm; dk:105 mm; Specific dynamic load factor K:100 N/mm²; h:295 mm; C1 max.:48 mm; l2 max.:389 mm; l7 min.:98 mm; Material constant KM:330; α:6 °; |
| RE 20035 Crossed Roller Bearing 200x295x35mm | Eye bolt:2 x 3/8-16 UNC; Da:259.999 mm; RG:3/4 NPT; P90°:180 kN; Bearing limiting speed:2800 r/min; R2:38.1 mm; da:152.4 mm; ba:64.294 mm; End plug (suffix Y):EPR 18; P120°:116 kN; |
| 022.25.500 Slewing Bearing | s1 max.:7.1 mm; Operating clearance factor k2:0.128; Ba min.:9 mm; d3:70 mm; Misalignment factor k1:0.097; Mass bearing + sleeve:0.85 kg; d2 ≈:61.9 mm; D:90 mm; Da max.:83 mm; D1 ≈:79.4 mm; |
| 85 mm x 130 mm x 36 mm CRBE 08022 B Cross Roller Bearing 80x165x22mm | d1:145 mm; d:150 mm; B2:77 mm; Hydraulic nut:HMV 32 E; G:M 160x3; Mass withdrawal sleeve:1.15 kg; Nut for removal:KM 32; G1:15 mm; B1:72 mm; Size (mm):85 mm x 130 mm x 36 mm ; |
| RA8008UU High Precision Cross Roller Ring Bearing | d:120.000 mm; D:215.0000 mm; Basic Static Radial Load Rating Co:53000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:119000 N; Grease Speed Rating n1:2800 rpm; B:42.00 mm; Oil Speed Rating n2:3400 rpm; |
| Slewing Ring For Excavator HITACHI EX220-1, Part Number:9154037 | Mass shaft washer:2.18 kg; d:150 mm; d1:212 mm; B:14.5 mm; r1,2 min.:1.5 mm; |
| XSU141094 Cross Roller Bearing Manufacturer 1024x1164x56mm | Rubber seating ring:RIS 208 A; C:21 mm; r1,2 min.:1 mm; B:49.2 mm; Thread grub screw G2:5/16-24 UNF; Basic static load rating C0:19 kN; s1:30.2 mm; Fatigue load limit Pu:0.8 kN; Recommended tightening torque for grub screw:6.5 N·m; Limiting speed1):2800 r/min; |
| CRBA03010 Crossed Roller Ring (30x55x10mm) Precision Robotic Arm Use | Comparative radial load rating CF:1080 kN; Fatigue load limit Pu:880 kN; d1 ≈:392 mm; D:488.95 mm; Comparative axial load rating CFa:179 kN; r1,2 min.:1.5 mm; Calculation factor Y1:2; Basic dynamic load rating C:4130 kN; Mass bearing:195 kg; d:355.6 mm; |
| VLA301255N Four Contact Ball Slewing Ring 1105x1398x90mm | D:85.0000 mm; Basic Dynamic Radial Load Rating C:51200 N; Accessories:Two Seals & Snap-Rin; Basic Static Radial Load Rating Co:54000 N; Sealed Speed Rating n3:5000 rpm; Oil Speed Rating n2:6700 rpm; d:45.000 mm; Grease Speed Rating n1:5000 rpm; B:30.20 mm; Fillet Radius ra:1.00 mm; |
Slewing Ring For Excavator HITACHI ZX500-3, Part Number:9247287 Video