| 12,7 mm x 28,575 mm x 7,9375 mm VRT 1055A Cross Roller Table 20x55x8mm | Comparative axial load rating CFa:358 kN; Fatigue load limit Pu:1600 kN; r1,2 min.:6.4 mm; Calculation factor e:0.33; r3,4 min.:1.5 mm; Calculation factor Y0:2; d:447.675 mm; Basic dynamic load rating C:8250 kN; D:635 mm; Basic static load rating C0:22000 kN; Size (mm):12,7 mm x 28,575 mm x 7,9375 mm ; |
| M4-22P4 Angular Contact Ball Slewing Rings | B:15 mm; a:12 mm; C:13 mm; d2:25 mm; D:52 mm; r2s (min):0.3 mm; Dynamic (Ca):29.9 kN; T:16.25 mm; rs (min):1 mm; Pu:4.090 kN; |
| 20Y-25-21200 Swing Bearing For Komatsu PC200LC-7 Excavator | with cylindrical bore:560 min-1; Pu:2850 kN; B:176 mm; Static (Cor):22.3 mm; Oil:386.710 kN; Grease:4770 kN; with tapered bore:670 min-1; Dynamic (Cr):12 mm; rs (min):5 mm; d:280 mm; |
| Supply CRBH15025AUU Cross Roller Bearings,CRBH15025AUU Bearing Size150x210x25mm | b:16.7 mm; d2 ≈:231 mm; da max.:231 mm; Limiting speed:1900 r/min; ra max.:2.5 mm; d1:180 mm; Da max.:326 mm; Calculation factor Y1:2.2; Basic dynamic load rating C:1665 kN; Basic static load rating C0:2360 kN; |
| CRBD 16035 A Crossed Roller Bearing 160x295x35mm | J max.:295.275 mm; Pa:8.27 kN; Max. speed for PosiTrac Plus seal:2350 r/min; Adapter sleeve assembly:SNW 15x2.1/2; Cap bolt, SAE grade:8; h:42.862 mm; PosiTrac Plus contact element:2 x B10724-37; Appropriate attachment bolt size G:0.625 in; Cap bolt recommended tightening torque:298.3 N·m; J1:53.975 mm; |
| Excavator Slewing Ring For PC600-7K, Part Number:21M-25-11100 | B:19.00 mm; Oil Speed Rating Max. n2:65000 rpm; D:28.5800 mm; d:9.530 mm; Keyway f:1.6 mm; Oil Mist Speed Rating Max. n3:80000 rpm; Keyway e:9.9 mm; X-L-O Part Number:20-107; Preload:0 lb; Grease Speed Rating Max. n1:40000 rpm; |
| 281.30.1075.013 Four Contact Ball Slewing Ring 907x1198x90mm | Specific dynamic load factor K:40 N/mm²; Mass bushing:0.31 kg; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; B:50 mm; Coefficient of friction µ min.:0.08; D:95 mm; d:90 mm; Tolerance shaft:f7 m/s; Specific static load factor K0:120 N/mm²; |
| 130 mm x 180 mm x 24 mm 012.40.900 Slewing Bearing | r, r1,2 min.:0.3 mm; B:16.5 mm; Mass inner ring:0.041 kg; F:45 mm; d:40 mm; Size (mm):130 mm x 180 mm x 24 mm ; |
| Komatsu PC400LC-7 Excavator Part Number 208-25-61100 Swing Bearing | E:1228 mm; s max.:3.5 mm; r1,2 min.:6 mm; Mass bearing:358 kg; Limiting value e:0.3; da min.:1083 mm; Calculation factor kr:0; Basic dynamic load rating C:3800 kN; Limiting speed:360 r/min; Reference speed:360 r/min; |
| PC200-2 Slewing Bearing | Oil Speed Rating Open/Shielded n2:19000 rpm; Basic Static Radial Load Rating Co:6550 N; Grease Speed Rating n1:16000 rpm; B:14.00 mm; Grease Speed Rating Open/Shielded n1:16000 rpm; Basic Dynamic Radial Load Rating C:13500 N; Accessories:Shield & Seal; Sealed Speed Rating n3:11000 rpm; D:47.0000 mm; Fillet Radius ra:1.00 mm; |