| No. | Brand | C | K | A | T | a | G | h | b |
| 02.50CH2AUS13AC4.750 | Parker | - | - | - | - | - | - | - | - |
| 61808-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 5 mm | - | - | - |
| 4T-21212 | NTN | - | - | - | - | - | - | 42.069 mm | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 140K | - | - | - | - | - | - | - | - | - |
| PVQ13-A2R-SS1S-20-CM7D-12 | - | - | - | - | - | - | - | - | - |
| 34CrMo4 | - | - | - | 6.5 mm | - | - | Tr 260x4 | - | - |
| 825 | koyo | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 11mm | - | - | 12 mm | - | - | - | - | - | - |
| 4D95S | - | - | - | - | - | - | - | - | - |
| 20lb | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 60 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | 530.022 mm | 20.904 mm | - |
| 4907 | SKF | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| MB991445-01 | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| C3 | - | - | - | - | - | - | - | - | - |
| 16F24C6164A3FEV80 | Parker | - | - | - | - | - | - | - | - |
| 2) | Parker | - | - | - | - | - | - | - | - |
| MKV23 | - | - | - | - | 91 mm | - | - | - | - |
| A10VD43 | Rexroth | - | - | - | - | - | - | - | - |
| VLI201094N Slewing Bearings (984x1198x56mm) Turntable Bearing | d:1.625 in; D:2.8750 in; Basic Static Radial Load Rating Co:18600 N; Fillet Radius rb:0.024 in; Basic Dynamic Radial Load Rating C:24200 N; Fillet Radius ra:0.04 in; B:0.5625 in; Grease Speed Rating n1:9000 rpm; Oil Speed Rating n2:30000 rpm; |
| XR897051 Cross Tapered Roller Bearing 1549.4x1828.8x101.6mm | Sealed Speed Rating n3:2600 rpm; D:160.0000 mm; Basic Static Radial Load Rating Co:208000 N; Grease Speed Rating n1:2600 rpm; d:75.000 mm; Basic Dynamic Radial Load Rating C:187000 N; Oil Speed Rating n2:3600 rpm; Accessories:One Shield; B:68.30 mm; Fillet Radius ra:2.00 mm; |
| VSU200844 Slewing Bearings (772x916x56mm) Turntable Ring | Fatigue load limit Pu:41.5 kN; Basic static load rating C0:380 kN; Da min.:133 mm; Ca min.:1.4 mm; B2 ≈:57 mm; B1:53 mm; d1:85 mm; Operating clearance factor k2:0.117; Basic dynamic load rating C:325 kN; G:M 100x2; |
| 10.12''x16.448''x1.97'' Customized Slewing Bearing Inner Geared | B:272 mm; D1 ≈:1113 mm; Limiting speed:450 r/min; Da max.:1192 mm; Basic dynamic load rating C:11600 kN; d:850 mm; d2 ≈:964 mm; D:1220 mm; ra max.:6 mm; Misalignment factor k1:0; |
| 7398/1366 Slewing Bearing | Oil Speed Rating n2:1900 rpm; Fillet Radius ra:3.00 mm; D:400.0000 mm; Fillet Radius rb:1.50 mm; Basic Dynamic Radial Load Rating C:377000 N; d:260.000 mm; B:65.00 mm; Basic Static Radial Load Rating Co:585000 N; Grease Speed Rating n1:0 rpm; |
| Slewing Ring For Excavator KOBELCO SK150LC IV, Part Number:24100N8102F1 | B4:14.3 mm; G:54.788 mm; B:12.954 mm; Lock washer:W 11; B1:46.609 mm; d:55 mm; Sleeve:S 11x1.7/8; d3 max.:75.54 mm; Lock nut:N 11; Hydraulic nut:HMVC 11E; |
| 10-20 0541/0-32022 Four Point Contact Ball Slewing Bearing No Gear Teeth | Fillet Radius ra:1.00 mm; B:30.20 mm; Basic Static Radial Load Rating Co:27500 N; d:35.000 mm; D:72.0000 mm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:8000 rpm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:37700 N; Grease Speed Rating n1:6000 rpm; |
| E.505.20.00.C Four Contact Ball Slewing Ring 304x504x56mm | A1:37.5 mm; s1:32.6 mm; Housing:SYFWK 510 L; A5:42.4 mm; Basic static load rating C0:23.2 kN; Housing material:Composite for food a; Bearing:YAR 210-115-2RFGR/HV; L:135 mm; Thread grub screw G2:3/8-24 UNF; H:115 mm; |
| 25,4 mm x 52 mm x 21,44 mm 134.32.1120 Slewing Beairng | Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:41000 N; B:20.00 mm; Sealed Speed Rating n3:3600 rpm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Static Radial Load Rating Co:32500 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; d:70.000 mm; D:110.0000 mm; Size (mm):25,4 mm x 52 mm x 21,44 mm ; |
| RB18025UU High Precision Cross Roller Ring Bearing | F:52 mm; r, r1,2 min.:0.6 mm; B:40 mm; Mass inner ring:0.16 kg; d:45 mm; |
12 mm x 28 mm x 8 mm Slewing Ring For Excavator KOBELCO SK120LC III, Part Number:24100N7529F1 Video
Deep groove ball bearings - 6001-2RSR - medias - Schaeffler
Deep groove ball bearings 6001-2RSR, main dimensions to DIN 625-1,. Radial load Axial load in one direction Axial load in two directions Sealed on both sides
6001 2RSR, FAG, Deep Groove Ball Bearing, Sealed
6001 2RSR, FAG, Deep Groove Ball Bearing, Sealed. Manufacturer: FAG. Seals/Shields: Rubber. Clearance: Standard. Quality: Premium. Dimensions: 12x28x8
FAG 6001-2RSR-C3 Deep Groove Ball Bearing, Single Row
FAG 6001-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 12mm ID, 28mm OD, 8mm Width, 32000rpm
FAG 6001-2RSR bearings - Nodes bearing
Nodes bearings have FAG 6001-2RSR bearings in stock, single row deep groove ball bearings with lip seals on both sides, 6001-2RSR bearings dimensions:
6001 2RSR FAG Deep Groove - Quality Bearings Online
This 6001 2RSR FAG bearing is a Sealed Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 12x28x8
6001-2RSR FAG New Single Row Ball Bearing. Size
Item: 6001RS Deep groove ball bearings . 6001RS Size: 12mm x 28mm x 8mm . Dimensions: 12*28*8 mm/Metric . Dynamic load rating Cr: 5,100 N . Static load
6001 2RSR C3, FAG, Deep Groove Ball Bearing, Sealed
6001 2RSR C3, FAG, Deep Groove Ball Bearing, Sealed ... Alternative Product Codes: 6001 2NSE C3, 6001 2RS C3, 6001 LLU C3, 6001 EE C3, 6001 2RS1