| 1797/3230GK4 Slewing Beairng | Calculation factor f2B:1.03; d:40 mm; Basic dynamic load rating C:12.4 kN; r3,4 min.:0.6 mm; Static axial stiffness, preload class A:38 N/µm; B:15 mm; Da max.:63.4 mm; r1,2 min.:1 mm; Calculation factor f2A:1; ra max.:1 mm; |
| 797/870K1 Bearing 870x1090x79mm | Oil Speed Rating Open/Shielded n2:1400 rpm; Accessories:Without Accessories; Sealed Speed Rating n3:0 rpm; B:38.00 mm; Basic Static Radial Load Rating Co:260000 N; Fillet Radius ra:2.00 mm; d:360.000 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; Basic Dynamic Radial Load Rating C:182000 N; D:440.0000 mm; |
| 280.30.1475.013 Four Contact Ball Slewing Ring 1307x1598x90mm | Basic static load rating C0:28.5 kN; Basic dynamic load rating C:87.1 kN; B:46 mm; Reference speed:9500 r/min; D1 ≈:109.2 mm; d:60 mm; Calculation factor e:0.4; Limiting speed:7000 r/min; Da max.:118 mm; r1,2 min.:2.1 mm; |
| 35 mm x 72 mm x 23 mm 9169646 Swing Bearing For HITACHI ZX200LC Excavator | B:14 mm; Grease:10 600 min-1; Bearing designation:6007 ; rs:1 mm; Oil:12 600 min-1; Dynamic (Cr):15.956 kN; Weight:0.154 kg; Static (Cor):10.328 kN; Pu:0.469 kN; ra:1 max; Size (mm):35 mm x 72 mm x 23 mm ; |
| 281.30.1200.013 Four Contact Ball Slewing Ring 1105x1398x90mm | Basic static load rating C0:224 kN; D:110 mm; Calculation factor Y2:2.7; b:6 mm; d2 ≈:63.9 mm; B1:50 mm; Da max.:99 mm; Reference speed:4800 r/min; ra max.:2 mm; Fatigue load limit Pu:24 kN; |
| 1797/3230G2Y Bearing 3230x4100x240mm | Dimension J:1.9375 in; Basic Dynamic Radial Load Rating:7890 lbf; Insert Bearing IB:ZMaRC; Width A:1.6250 in; Dimension B:4.7500 in; Dimension C:4.0000 in; Shaft Diameter D:1 15/16 in; Dimension H:1.5000 in; Pin Dia A1:0.6875 in; Basic Static Radial Load Rating Co:5220 lbf; |
| 121.50.3150 Slewing Bearing | s max.:3.5 mm; Da max.:1197 mm; ra max.:5 mm; Fatigue load limit Pu:400 kN; Basic static load rating C0:6550 kN; Limiting speed:400 r/min; Mass bearing:243 kg; Db min.:1197 mm; Axial load factor Y:0.6; Basic dynamic load rating C:2640 kN; |
| VLI200744N ZT Flange Slewing Ring 648x848x56mm | Outher Width C:0.5512 in; Inner Width B:1.220 in; Bore Diameter D:3/4 in; Weight W:0.31 lb; Insert Bearing IB:Stainless Steel; Outside Diameter D2:1.8504 in; Basic Dynamic Radial Load Rating:2380 lbf; Dimension S:0.500 in; Basic Static Radial Load Rating Co:1470 lbf; Diameter D3:1.110 in; |
| PC90-6 Slewing Bearing | Hydraulic nut:HMV 160 E; d1:710 mm; Mass withdrawal sleeve:320 kg; B1:540 mm; G:Tr 800x7; d:750 mm; G1:65 mm; Nut for removal:HM 31/800; B2:556 mm; A:15 mm; |
| 797/1250G2 Bearing 1250x1608x148mm | d:320 mm; B:42.316 mm; G:319.075 mm; d3 max.:381.127 mm; Hydraulic nut:HMVC 64E; B5:51.841 mm; Sleeve:S 3264x11.15/16; Locking plate:PL 64; Mass adapter sleeve assembly:44.5 kg; d1:303.212 mm; |