| Slewing Bearing SH210-5 For Excavator | Width G:7/16; Diameter E:1.469 in; Basic Radial Load Rating-Static SCO:899 lbf; Depth L:9/16 in; Variant:CONV-3-Y-2; Basic Radial Load Rating-Dynamic DC:1330 lbf; D:1.6540 in; Approx. Weight:0.27 lb; Shaft Diameter D:5/8 in; B:0.7500 in; |
| Slewing Ring For Excavator KOBELCO SK100 III, Part Number:24100N7529F1 | Grease Speed Rating n1:4900 rpm; Oil Speed Rating n2:6400 rpm; d:65.000 mm; Basic Dynamic Radial Load Rating C:63700 N; B:23.00 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:54000 N; D:120.0000 mm; |
| MTO-145T Slewing Bearings(145x300x50mm) (5.709x11.811x1.968inch) Without Gear | End cover:ECW 207; Db:90 mm; Recommended tightening torque for grub screw:6.5 N·m; Bearing:YAR 207-107-2RF/VE49; A:35 mm; J:130 mm; B4:6 mm; B:42.9 mm; Basic static load rating C0:15.3 kN; H:156 mm; |
| 024.60.3310.03 Bearing 3190x3503x240mm | Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Mass bushing:0.35 kg; D:68 mm; B:70 mm; Specific static load factor K0:20 N/mm²; d:60 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; |
| 787/1700KM Slewing Bearing | B:31.00 mm; d:65.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6000 rpm; Basic Dynamic Radial Load Rating C:57200 N; D:120.0000 mm; Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:20000 N; |
| RB14016 Precision Cross Roller Bearing | D:75 mm; r1,2 min.:1 mm; Fatigue load limit Pu:0.36 kN; da min.:49.6 mm; Basic static load rating C0:8.5 kN; Preload class A GA:70 N; Mass bearing:0.25 kg; Calculation factor f1:1; Static axial stiffness, preload class B:59 N/µm; B:16 mm; |
| Produce CRB50040 Crossed Roller Bearing,CRB50040 Bearing Size 500X600X40mm | Da:180 mm; R2:30.163 mm; P180°:48.9 kN; RG:3/8 NPT; J1:60.325 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; Stabilizing ring:SR-20-17; P90°:71.2 kN; A2:152.797 mm; |
| Excavator Slewing Ring For CATERPILLAR 345B II, Part Number:227-6094 | Grease Speed Rating Open/Shielded n1:3300 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields; D:160.0000 mm; d:90.000 mm; Basic Dynamic Radial Load Rating C:101000 N; Basic Static Radial Load Rating Co:108000 N; B:30.00 mm; |
| CRBB09020 Cross Roller Bearing (90x140x20mm) Rotary Table Bearing | Basic dynamic load rating C:30.7 kN; L:175 mm; Basic static load rating C0:19 kN; Hexagonal key size for grub screw N:3 mm; A5:23.5 mm; Housing material:Cast iron; J7:17 mm; B1:42.9 mm; Limiting speed:950 r/min; Fatigue load limit Pu:0.8 kN; |
| SX011860 Cross Roller Bearing 300x380x38mm | J min.:254 mm; H2:63.5 mm; H1:104.775 mm; Attachment bolt diameter G:25.4 mm; J max.:311.15 mm; da:100.013 mm; Mass bearing unit:19.7 kg; A:89.694 mm; B:80.169 mm; Limiting speed:2200 r/min; |