No. | Brand | C | K | A | T | a | G | h | b |
25kg | - | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
1973-1994 | koyo | - | - | - | - | - | M 45x1.5 | - | 6 mm |
N21%, | - | - | - | - | 228.6 mm | - | - | - | - |
28016-AA0308A | - | - | - | - | - | 2.381 mm | - | - | - |
2pieces | - | - | - | - | - | - | - | - | - |
Fms-G4-02te | - | - | - | - | - | - | - | - | - |
12-3-3 | - | - | - | - | - | - | - | - | - |
2.5mm-30mm | - | - | - | - | 260.35 mm | - | - | - | - |
XV1000 | - | - | - | - | - | - | - | - | - |
2x | - | - | - | - | - | - | - | - | - |
5RZD0 | NTN | - | - | 226 mm | - | - | - | - | - |
GSA2080 | - | - | - | - | - | - | - | - | - |
R30LRAMKT | - | - | - | - | - | - | - | - | - |
23 | - | - | - | - | - | - | - | - | - |
626 | - | 33 mm | - | - | 42.25 mm | 33 mm | - | - | - |
500mg/H | - | - | - | - | - | - | - | - | 16.7 mm |
NPR71 | - | - | - | - | 48.5 mm | - | - | - | - |
2 | - | - | - | - | - | - | M 25x1.5 | - | - |
6000 | fag | - | - | - | - | - | - | 46.038 mm | - |
30pcs | - | - | - | - | - | - | M 30x2 | - | - |
304 | - | - | - | - | - | - | - | - | - |
1220X2440X6mm | - | - | - | - | - | - | - | - | - |
14" | - | 22 mm | - | - | 27.25 mm | - | - | - | - |
100 | - | - | - | - | - | - | - | - | - |
T43014 | - | - | - | - | - | - | - | - | - |
RS90-100-SH | Parker | - | - | - | - | - | - | - | - |
133.32.800 Slewing Bearing | Calculation factor A:0.014; Fatigue load limit Pu:1.22 kN; da min.:57 mm; Basic static load rating C0:28.5 kN; Calculation factor Y2:0.57; Standard grease:GXN; Calculation factor Y0:0.52; Db max.:85.8 mm; d:50 mm; |
792/2800G Slewing Bearing | Limiting speed:7500 r/min; db min.:99 mm; Basic dynamic load rating C:68.2 kN; Fatigue load limit Pu:10.8 kN; da min.:89.6 mm; da max.:95 mm; Reference speed:6700 r/min; F:96.5 mm; r3,4 min.:1 mm; Da max.:124 mm; |
XU160405 Crossed Roller Slewing Bearings 336x474x46mm | B:25.40 mm; Basic Dynamic Radial Load Rating C:30700 N; d:25.000 mm; Basic Static Radial Load Rating Co:20400 N; Oil Speed Rating n2:10000 rpm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7500 rpm; D:62.0000 mm; Sealed Speed Rating n3:7500 rpm; |
CRB9016UU High Precision Cross Roller Ring Bearing | s:2 mm; Pu:30.140 kN; Dynamic (Ca):220 kN; D:150 mm; rs (min):2 mm; B:36 mm; F:101 mm; Static (Coa):261 kN; b:mm; d2 (max):mm; |
RB11012 Cross Roller Bearing 110x135x12mm | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:40300 N; d:50.000 mm; Oil Speed Rating n2:8000 rpm; B:20.00 mm; Basic Static Radial Load Rating Co:30000 N; D:90.0000 mm; Grease Speed Rating n1:6000 rpm; |
A12-48E12 Four Point Contact Ball Slewing Bearing With External Gear | r1 min.:1 mm; Design (sliding contact surface combination):Steel/steel; b1:5 mm; Specific static load factor K0:300 N/mm²; α:8 °; Material constant KM:330; C:28.575 mm; ra max.:1 mm; D:61.913 mm; b:4.8 mm; |
150 mm x 225 mm x 35 mm PC200-3 Slewing Bearing | Designation associated SD design radial shaft seal with a low cross-sectional height:SD 18x24x3; Fatigue load limit Pu:1.8 kN; Basic static load rating C0:15 kN; Designation associated G design radial shaft seal with a low cross-sectional height:G 18x24x3; Mass needle roller and cage assembly:0.012 kg; Fw:18 mm; Reference speed:20000 r/min; Ew:24 mm; U:12 mm; Limiting speed:24000 r/min; Size (mm):150 mm x 225 mm x 35 mm ; |
132.50.4500 Slewing Bearing | Grease Speed Rating n1:4300 rpm; d:75.000 mm; B:37.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:114000 N; Grease Speed Rating Open/Shielded n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; |
789/1260G2 Slewing Bearing | Effective load carrying cross section A:26640 mm²; Mass bushing:1.67 kg; Specific dynamic load factor K:140 N/mm²; Tolerance shaft:h8; B:150 mm; Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; Specific static load factor K0:200 N/mm²; Coefficient of friction µ max.:0.08; Coefficient of friction µ min.:0.03; |
CRB4010UUT1 High Precision Cross Roller Ring Bearing | ba:51.594 mm; Pa:20.2 kN; P150°:59.6 kN; P120°:66.7 kN; L:419.1 mm; R2:31.75 mm; Cap bolt:5/8-11 UNC; P180°:72.5 kN; H1:125.425 mm; N1:24.209 mm; |
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
9O-1B25-0378-0401 Four Point Contact Ball Slewing Ring Video