| SD.1200.32.00.C Four Contact Ball Slewing Ring 905x1200x90mm | Rα:45 °; Limiting speed:9500 r/min; RG:1/4-28 UNF; J:76.5 mm; R1:19 mm; DN:6.5 mm; GN:1/4-28 SAE-LT; Hexagonal key size for grub screw N:2.381 mm; A3:3.2 mm; A1:11 mm; |
| VLI200744N ZT Flange Slewing Ring 648x848x56mm | Outher Width C:0.5512 in; Inner Width B:1.220 in; Bore Diameter D:3/4 in; Weight W:0.31 lb; Insert Bearing IB:Stainless Steel; Outside Diameter D2:1.8504 in; Basic Dynamic Radial Load Rating:2380 lbf; Dimension S:0.500 in; Basic Static Radial Load Rating Co:1470 lbf; Diameter D3:1.110 in; |
| XU080149 Cross Roller Bearing Manufacturer 101.6x196,85x22.22mm | b1:9.4 mm; Fatigue load limit Pu:375 kN; Da max.:425 mm; r1,2 min.:3 mm; Basic dynamic load rating C:1760 kN; B:118 mm; K:5 mm; da min.:336 mm; d:320 mm; s max.:6 mm; |
| RK6-29P1Z Slewing Ring Bearings Flanged Cross-section | J max.:247.65 mm; L:304.8 mm; S:0.794 mm; H1:79.375 mm; Mass bearing unit:11.6 kg; H2:47.625 mm; Basic dynamic load rating C:158 kN; Limiting speed:3400 r/min; d2:111.125 mm; B:92.075 mm; |
| XSU140414 Cross Roller Bearing Manufacturer 344x484x56mm | Attainable speed for grease lubrication:17000 r/min; Reference grease quantity Gref:1.74 cm³; r3,4 min.:0.3 mm; db min.:53.2 mm; a:14.2 mm; r1,2 min.:0.6 mm; Basic static load rating C0:10.4 kN; Static axial stiffness, preload class A:43 N/µm; Fatigue load limit Pu:0.44 kN; ra max.:0.6 mm; |
| VLA301155N Four Contact Ball Slewing Ring 1005x1298x90mm | Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; Oil Speed Rating n2:4300 rpm; B:58.70 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:108000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; |
| VSU200944 Slewing Bearings M-anufacturer 872x1016x56mm | J min.:219.075 mm; Labyrinth ring:2 x LOR 36; Stabilizing ring:2 x SR-15-0; Mass pillow block:13.1 kg; End plug (suffix Y):EPR 7; Cap bolt, SAE grade:5; P150°:25.4 kN; Max. speed for PosiTrac Plus seal:2350 r/min; Bearing:1215 K; Housing:SAF 515; |
| HS6-33E1Z Slewing Bearings (28.83x37.2x2.2inch) With Internal Gear | B5:125 mm; h:25 mm; d1:1025 mm; Lock washer / Locking clip:MS 30/950; b:60 mm; Mass lock nut:124 kg; Associated eyebolt for handling:M 16; B:100 mm; d2:985 mm; G:Tr 950x8; |
| 110.50.3150 Slewing Bearing | d2 max.:114 mm; l4 max.:254 mm; l5 ≈:30 mm; Specific dynamic load factor K:100 N/mm²; B:35 mm; Mass rod end:4.1 kg; dk:66 mm; w:60 mm; d4 ≈:70 mm; Material constant KM:330; |
| 022.30.900 Slewing Bearing | H:90 mm; Da max.:914 mm; Mass bearing (including seat washer where applicable):115 kg; d1 ≈:995 mm; Basic dynamic load rating C:761 kN; D:1000 mm; Minimum load factor A:240; Reference speed:380 r/min; ra max.:3 mm; D1 ≈:855 mm; |