| No. | Brand | C | K | A | T | a | G | h | b |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| GS-3120C | - | - | - | - | - | - | - | - | - |
| S90 | - | - | - | - | - | - | - | - | - |
| A10VSO45 | Rexroth | - | - | - | - | - | - | - | - |
| (45%) | - | - | - | - | - | - | - | - | - |
| PC400-7 | INA | - | - | - | - | - | - | - | - |
| Zeta6104-83-93 | Parker | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| MSF23 | - | - | - | - | - | - | - | - | - |
| 28mm | - | 23.8 mm | - | - | - | - | - | - | 4.8 mm |
| 2 | - | - | - | - | - | - | - | - | - |
| 6001-2NSE | Nachi | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| (2) | - | - | - | - | - | - | - | - | - |
| PW10 | - | - | - | - | - | - | - | - | - |
| 3000*1500mm | - | - | - | - | - | - | - | - | - |
| Zx75 | Hitachi | - | - | - | - | - | - | - | - |
| 50 | NTN | - | - | - | - | - | - | - | - |
| 6004-2RS | - | - | - | - | 648.002 mm | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| R20 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| a2f | - | - | - | - | - | - | - | - | - |
| 7783-20-2 | - | - | - | - | - | - | - | - | - |
| NUP216-E-TVP2 | - | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| 95cm | - | - | - | - | - | - | - | - | - |
| HS6-37E1Z Slewing Bearings (32.83x41.2x2.2inch) With Internal Gear | d:45.000 mm; D:85.0000 mm; Grease Speed Rating n1:5000 rpm; Sealed Speed Rating n3:5000 rpm; Basic Static Radial Load Rating Co:39000 N; Fillet Radius ra:1.00 mm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:48800 N; Oil Speed Rating n2:6700 rpm; B:30.20 mm; |
| Komatsu PC300HD-8 Excavator Part Number 207-25-61100 Swing Bearing | B2:600 mm; G:Tr 900x7; d:850 mm; Nut for removal:HM 31/900; Hydraulic nut:HMV 180 E; Mass withdrawal sleeve:368 kg; G2:G 1/4; B1:560 mm; G1:60 mm; A:15 mm; |
| 023.40.1400 Slewing Bearing | Sealed Speed Rating n3:6300 rpm; Oil Speed Rating n2:11000 rpm; Accessories:Seal & Snap-Ring; B:19.00 mm; Basic Static Radial Load Rating Co:16000 N; Grease Speed Rating Open/Shielded n1:9000 rpm; d:30.000 mm; Basic Dynamic Radial Load Rating C:28100 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Grease Speed Rating n1:9000 rpm; |
| RB12016 Cross Roller Bearing 120x150x16mm | J1:57.15 mm; Bearing:1318 K; RG:3/8 NPT; J max.:342.9 mm; P120°:48.9 kN; h:50.8 mm; End plug (suffix Y):EPR 11; P180°:54.3 kN; da:82.55 mm; Initial grease fill:481.95 g; |
| 25 mm x 47 mm x 12 mm 111.32.1800 Slewing Bearing | Stabilizing ring:SR-0-40; Cap bolt:4 x 1 1/2-6 UNC; Ca:147.803 mm; H:495.3 mm; J1:139.7 mm; Pa:82.7 kN; Max. speed for Taconite seal:425 r/min; Mass pillow block:364 kg; da:182.563 mm; Taconite seal:TER 665; Size (mm):25 mm x 47 mm x 12 mm ; |
| 20 mm x 42 mm x 12 mm XU120222 Cross Roller Bearing 140x300x36mm | N1:34.925 mm; RG:1 NPT; P60°:416 kN; P120°:151 kN; da:203.2 mm; Pa:59.6 kN; End plug (suffix Y):EPR 23; J1:114.3 mm; Bearing:23044 CCK/W33; Initial grease fill:1672.65 g; Size (mm):20 mm x 42 mm x 12 mm ; |
| XD.10.1549P5 Cross Tapered Roller Bearing 1549.4x1828.8x101.6mm | B:85 mm; Grease:1330 kN; Oil:135.410 kN; d:140 mm; D:225 mm; Static (Cor):8.3 mm; Dynamic (Cr):4.5 mm; with tapered bore:1 100 min-1; rs (min):2.1 mm; with cylindrical bore:850 min-1; |
| RE 7013 UU Crossed Roller Bearing 70x100x13mm | Oil Speed Rating n2:22000 rpm; Basic Static Radial Load Rating Co:5850 N; Basic Dynamic Radial Load Rating C:9360 N; Fillet Radius rb:0.15 mm; D:37.0000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating n1:18000 rpm; d:20.000 mm; B:9.00 mm; |
| RB3010 Cross Roller Bearing 30x55x10mm | P60°:226 kN; ba:69.85 mm; Housing:SAF 038 KA; R1:104.775 mm; P150°:78.3 kN; Labyrinth ring:2 x LOR 154; J max.:488.95 mm; P90°:136 kN; L:558.8 mm; Stabilizing ring:2 x 38151-38; |
| Slewing Ring For Excavator HITACHI EX120-2, Part Number:9102726 | G2:G 1/4; G1:48 mm; Mass withdrawal sleeve:59 kg; A:9 mm; d:440 mm; B2:341 mm; B1:330 mm; d1:420 mm; Nut for removal:HM 3192; G:Tr 460x5; |
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
9O-1B20-0744-0341 Four Point Contact Ball Slewing Ring Video