| 9E-1B25-0486-1063 Four Point Contact Ball Slewing Ring | Threads per inch:18; B4:14.3 mm; Mass adapter sleeve assembly:0.36 kg; Sleeve:S 11x2; d1:50.8 mm; B1:46.609 mm; Hydraulic nut:HMVC 11E; B:12.954 mm; Lock washer:W 11; d:55 mm; |
| 122.32.1600 Slewing Bearing | Basic static load rating C0:1220 kN; r3,4 min.:3 mm; Fatigue load limit Pu:132 kN; Limiting speed:3600 r/min; Reference speed:2200 r/min; ra max.:3 mm; r5 min.:1 mm; Da min.:157 mm; da max.:109 mm; rc max.:1 mm; |
| RE14016 Cross Roller Bearing 140x175x16mm | Accessories:One Seal & Snap-Ring; Grease Speed Rating n1:3800 rpm; D:120.0000 mm; Fillet Radius ra:2.00 mm; d:55.000 mm; B:49.20 mm; Basic Dynamic Radial Load Rating C:119000 N; Basic Static Radial Load Rating Co:122000 N; Sealed Speed Rating n3:3800 rpm; Oil Speed Rating n2:5000 rpm; |
| RU445UUCC0P5 High Precision Crossed Roller Bearing | N1:25.4 mm; Taconite seal:TER 115; da:109.537 mm; P90°:113 kN; J max.:406.4 mm; A2:269.875 mm; H2:60.325 mm; Da:230 mm; Adapter sleeve assembly:SNW 126x4.5/16; H1:152.4 mm; |
| RB30025 Precision Cross Roller Bearing | Bolt Pattern C:0.55 in; Frame Size B:18 in; Travel:12; Bolt Pattern D:2 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore):30 mm, 35 mm; Bolt Pattern E:16 1/2 in; Height G:3.438 in; Frame Size A:4 41/64 in; Length H:0.500 in; Shaft C/L Distance F:1 27/32 in; |
| R8-39N3 Crossed Roller Slewing Rings With Internal Gear | Grease Speed Rating Open/Shielded n1:1700 rpm; Basic Static Radial Load Rating Co:315000 N; d:240.000 mm; Oil Speed Rating Open/Shielded n2:2000 rpm; Basic Dynamic Radial Load Rating C:255000 N; D:360.0000 mm; Sealed Speed Rating n3:1000 rpm; Fillet Radius ra:2.50 mm; B:56.00 mm; Accessories:Two Seals & Snap-Rin; |
| SX011840 Cross Roller Bearing 200x250x24mm | Housing:FSAF 520; P90°:71.2 kN; End plug (suffix Y):EPR 12; H1:114.3 mm; Adapter sleeve assembly:SNW 20x3.3/8; R1:58.737 mm; Initial grease fill:365.71 g; P120°:44.5 kN; Da:180 mm; PG:1/4 NPT; |
| 124.32.1600 Slewing Bearing | Stabilizing ring:2 x A8898; Bearing:23052 CCK/W33; RG:1 NPT; Initial grease fill:2749.95 g; PG:1/4 NPT; Mass pillow block:351 kg; Eye bolt:2 x 1/2-13 UNC; A2:311.15 mm; Da:399.999 mm; H1:241.3 mm; |
| DH220-7LC Slewing Bearing | Basic dynamic load rating C:5280 kN; Comparative radial load rating CF:1290 kN; B:419.1 mm; Calculation factor e:0.33; d:482.6 mm; Calculation factor Y1:2; Basic static load rating C0:13700 kN; d1 ≈:505 mm; D:615.95 mm; Design variant/feature:TQOESN/GW; |
| KOBELCO SK60 EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE | ra max.:8 mm; D1 ≈:1111 mm; b:22.3 mm; Da max.:1240 mm; G:Tr 850x7; Basic dynamic load rating C:21587 kN; Calculation factor Y0:1.8; B2 ≈:553 mm; r1,2 min.:9.5 mm; Fatigue load limit Pu:2320 kN; |