No. | Brand | C | K | A | T | a | G | h | b |
BMT195 | INA | - | - | - | - | - | - | - | - |
A8VO160 | Rexroth | - | - | - | - | - | - | - | - |
3/4' | - | - | - | 76.2 mm | - | - | - | - | - |
350 | fag | - | - | - | - | - | - | - | - |
FC3U215N | - | - | - | - | - | - | - | - | - |
99% | - | - | - | - | - | - | - | - | mm |
ST25-UU | thk | - | - | - | - | - | - | - | - |
4x | - | - | 9 mm | - | - | - | - | - | - |
5/10/20pcs | - | - | - | - | - | - | - | - | - |
D21 | INA | - | - | 60.325 mm | - | - | - | - | - |
29985-80050-000 | - | 13 mm | - | - | 16.25 mm | 12 mm | - | - | - |
1312 | Bower | - | - | - | - | - | - | - | - |
180W | - | - | - | - | - | - | - | - | - |
2k | - | - | - | - | - | 16.111 mm | - | - | - |
6208ZZENR | Nachi | - | - | - | - | - | - | - | - |
1pc | - | - | - | 9 mm | - | - | Tr 630x6 | - | - |
NJ210E.TVP2.C3 | fag | 54 mm | 4.5 mm | - | - | - | - | - | - |
1986-1990 | Timken | - | - | - | - | - | - | - | - |
(NNU3028) | - | - | - | - | - | - | - | - | - |
15mm | INA | - | - | - | - | - | - | - | - |
200GT | - | - | - | - | - | - | - | - | - |
RATY25-XL | INA | - | - | - | - | - | - | - | - |
21ply | - | - | - | - | - | - | - | - | - |
RK6-25P1Z Slewing Bearings (21.03x29.45x2.205inch) Turntable Bearing | B:102.00 mm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:540000 N; Fillet Radius rb:1.00 mm; D:350.0000 mm; Oil Speed Rating n2:1700 rpm; Grease Speed Rating n1:1400 rpm; d:220.000 mm; Basic Static Radial Load Rating Co:930000 N; |
6789/3405G Slewing Bearing | A:470 mm; P180°:4400 kN; Q180°:2900 kN; Q150°:3350 kN; ba max.:243 mm; J6:1210 mm; Ca:270 mm; bc:248.5 mm; Q120°:5800 kN; Lock nut:HM 30/530; |
10.12''x16.448''x1.97'' Slewing Bearing Inner Geared | Calculation factor Y1:0.78; Da max.:35.6 mm; da max.:23 mm; da min.:21.4 mm; D2 ≈:34.95 mm; Limiting speed:16000 r/min; Basic static load rating C0:8.8 kN; Calculation factor Y0:0.66; Fatigue load limit Pu:0.365 kN; Mass bearing:0.1 kg; |
Komatsu PC300HD-6LE Excavator Part Number 208-25-61100 Swing Bearing | B:7.00 mm; Sealed Speed Rating n3:7500 rpm; D:52.0000 mm; Basic Static Radial Load Rating Co:4150 N; Basic Dynamic Radial Load Rating C:4940 N; Oil Speed Rating Open/Shielded n2:14000 rpm; d:40.000 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:0.30 mm; |
PC360-7 Slewing Bearing | Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ min.:0.08; Specific static load factor K0:120 N/mm²; D:60 mm; B:40 mm; Coefficient of friction µ max.:0.15; d:55 mm; Permissible sliding velocity v max.:1 m/s; Permissible sliding velocity v min.:0 m/s; Tolerance housing:H7 m/s; |
11-250455/1-04110 Four-point Contact Ball Slewing Bearing With External Gear | Lock nut:N 08; d1:31.75 mm; Threads per inch:18; Sleeve:S 8x1.1/4; Mass adapter sleeve assembly:0.19 kg; d3 max.:57.277 mm; B4:12.598 mm; B:11.379 mm; d:40 mm; G:39.7 mm; |
A12-47N3E Four Point Contact Ball Slewing Bearing With Inernal Gear | d:25 mm; F:30 mm; r, r1,2 min.:0.3 mm; B:38.5 mm; Mass inner ring:0.065 kg; |
CRBD 16035 A Crossed Roller Bearing 160x295x35mm | J max.:295.275 mm; Pa:8.27 kN; Max. speed for PosiTrac Plus seal:2350 r/min; Adapter sleeve assembly:SNW 15x2.1/2; Cap bolt, SAE grade:8; h:42.862 mm; PosiTrac Plus contact element:2 x B10724-37; Appropriate attachment bolt size G:0.625 in; Cap bolt recommended tightening torque:298.3 N·m; J1:53.975 mm; |
RE30040 Cross Roller Bearings,RE30040 Bearings SIZE 300x405x40mm | Old MRC Bearing Number:205FS3; Accessories:8000 One Seal; Speed Rating-Single and Double Sealed Grease SDG:8500 rpm; Width - Inner Ring B1:15.20 mm; Basic Interchange NDH:8026; d:26.000 mm; Width - Overall B:15.9 mm; Fillet Radius ra:1.00 mm; Basic Interchange BCA:8026; Basic Radial Load Rating-Static SCO:8000 N; |
VLI200944N Slewing Bearings (840x1048x56mm) Turntable Bearing | ra:1 max; rs:1 mm; Dynamic (Cr):19.443 kN; da:35 min; Static (Cor):11.186 kN; Weight:0.2 kg; B:16 mm; Oil:13 000 min-1; Pu:0.508 kN; d:30 mm; |
RU148X Cross Roller Bearing 90x210x25mm Video