| VSI200414-N Slewing Bearing 325x486x56mm | Basic Dynamic Radial Load Rating C:247000 N; B:65.00 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:290.0000 mm; Basic Static Radial Load Rating Co:228000 N; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:1600 rpm; Oil Speed Rating Open/Shielded n2:2900 rpm; Accessories:Two Shields & Snap-R; d:105.000 mm; |
| E.505.20.C Four Contact Ball Slewing Ring 304x504x56mm | B:7.142 mm; Calculation factor kr:0.025; Basic static load rating C0:1.12 kN; d2 ≈:11.9 mm; da max.:11.8 mm; Fatigue load limit Pu:0.048 kN; D3:24.613 mm; ra max.:0.4 mm; Mass bearing:0.012 kg; D2 ≈:19.9 mm; |
| 011.45.1400 Slewing Bearing | Mass inner ring:0.02 kg; F:30 mm; r, r1,2 min.:0.3 mm; d:25 mm; B:12.5 mm; |
| VRT 3080A Cross Roller Table 40x80x16mm | L:330.2 mm; B:102.394 mm; da:88.9 mm; J min.:234.95 mm; S:0.794 mm; Mass bearing unit:14.3 kg; Limiting speed:2300 r/min; H2:57.15 mm; A:80.963 mm; J max.:282.575 mm; |
| RU228X Cross Roller Bearing 160x295x35mm | Grease Speed Rating n1:5000 rpm; D:120.0000 mm; d:55.000 mm; Basic Dynamic Radial Load Rating C:50700 N; Basic Static Radial Load Rating Co:18000 N; Oil Speed Rating n2:6000 rpm; B:29.00 mm; Fillet Radius ra:2.00 mm; |
| RE24025 Cross Roller Bearings,RE24025 Bearings SIZE 240x300x25mm | Calculation factor (back-to-back, face-to-face) Y2:1.41; D1:124.6 mm; d2:105.4 mm; Preload class A GA:460 N; Calculation factor f2A:1; Calculation factor f2C:1.05; Mass bearing:1.01 kg; Calculation factor (single, tandem) Y2:0.87; Static axial stiffness, preload class C:472 N/µm; da min.:97 mm; |
| 231.20.0400.013 Four Contact Ball Slewing Ring 304x504x56mm | Calculation factor Y2:2.3; Basic dynamic load rating C:5850 kN; Comparative axial load rating CFa:265 kN; Calculation factor e:0.44; Mass bearing:237 kg; D1 ≈:518 mm; Thrust factor K:1.34; r3,4 min.:3.3 mm; r1,2 min.:1.5 mm; Fatigue load limit Pu:1020 kN; |
| 206-25-00200 Swing Bearing For Komatsu PC200LC-7B Excavator | L:175 mm; Housing:SY 508 M/VZ033; A1:30 mm; H1:49.2 mm; Basic dynamic load rating C:30.7 kN; J min.:125 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Recommended tightening torque for grub screw:7.4 N·m; Housing material:Cast iron; H2:19 mm; |
| 231.20.0600.503 Four Contact Ball Slewing Ring 534x742.8x56mm | L:143 mm; Recommended diameter for attachment bolts, mm G:16 mm; Db2:118 mm; A1:15 mm; d:49.212 mm; B1:46 mm; N4:4 mm; A:43 mm; Recommended diameter for attachment bolts, inch G:0.625 in; s1:27.5 mm; |
| CAT320B Slewing Bearing | P150°:33.4 kN; R2:21.431 mm; N1:19.05 mm; L:285.75 mm; RG:1/4 NPT; Bearing:22215 EK; Labyrinth ring:2 x LOR 37; H1:82.55 mm; Mass pillow block:15.4 kg; P90°:59.6 kN; |