No. | Brand | C | K | A | T | a | G | h | b |
NU306E.TVP | - | - | - | - | - | - | - | - | - |
(AQD-19) | INA | - | - | - | - | - | - | - | - |
606-2RS/C | - | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
0811404752 | Rexroth | - | - | - | - | - | - | - | - |
[4pcs] | - | - | - | - | - | - | - | - | - |
R37 | - | - | - | - | - | - | - | - | - |
(50pcs) | - | - | - | - | - | - | - | - | - |
7 | TRW | - | - | - | - | - | - | - | - |
10W | - | - | - | - | - | - | M 52x3 | 195 mm | - |
2-1/2 | - | 153 mm | - | - | - | - | - | - | - |
6211-2NSE | Nachi | - | - | - | - | - | - | - | - |
25Z246-D6 | NSK | - | - | - | - | - | - | - | - |
2020 | - | - | - | - | - | - | - | - | - |
12'x28'x8' | - | - | - | - | - | - | - | 31.75 mm | - |
PC130-8M0 | - | - | 5 mm | - | - | - | - | - | - |
23164EMB | INA | - | - | - | 32.751 mm | - | - | - | - |
100% | - | - | - | - | - | - | - | - | - |
(TD5091) | - | - | - | - | - | - | - | - | - |
E311 | - | - | - | - | - | - | - | - | - |
L9-46P9Z Four-point Contact Ball Slewing Bearings | Calculation factor Y0:2.8; B2:19 mm; b:6 mm; Basic static load rating C0:325 kN; Basic dynamic load rating C:291 kN; Calculation factor e:0.22; d2 ≈:98.2 mm; B:44 mm; da max.:98 mm; db min.:90 mm; |
NRXT15025E/ Crossed Roller Bearings (150x210x25mm) | D:72.0000 mm; Fillet Radius ra:1.00 mm; B:27.00 mm; Accessories:One Shield & Snap-Ri; d:35.000 mm; Basic Static Radial Load Rating Co:36500 N; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6000 rpm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; |
023.40.1400 Slewing Bearing | Sealed Speed Rating n3:6300 rpm; Oil Speed Rating n2:11000 rpm; Accessories:Seal & Snap-Ring; B:19.00 mm; Basic Static Radial Load Rating Co:16000 N; Grease Speed Rating Open/Shielded n1:9000 rpm; d:30.000 mm; Basic Dynamic Radial Load Rating C:28100 N; Oil Speed Rating Open/Shielded n2:11000 rpm; Grease Speed Rating n1:9000 rpm; |
79780G2 Bearing 400x660x89mm | d:1000 mm; B:530 mm; D:1470 mm; Weight:3000 ; Static (Cor):37595 ; Bearing designation:PLC 512-66 ; B1:345 mm; Pu:2156.830 kg; Dynamic (Cr):15184 kN; |
131.45.2800 Slewing Bearing | a:3.5 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; h:152 mm; D1:180 mm; d:150 mm; D:170 mm; Specific static load factor K0:45 N/mm²; B1:10 mm; Permissible sliding velocity v max.:0.5 m/s; |
CRBA22025 Cross-Roller Ring (220x280x25mm) Rotary Units Of Manipulators Use | d:140 mm; G:139.624 mm; d3 max.:180.315 mm; d1:123.825 mm; Sleeve:S 128x4.7/8; B4:23.012 mm; Threads per inch:12; B1:134.95 mm; Lock nut:AN 28; Lock washer:W 28; |
112.40.2240 Slewing Bearing | da min.:7.7 mm; r1,2 min.:0.3 mm; d:6 mm; Da max.:15 mm; Reference speed:95000 r/min; D:17 mm; Basic dynamic load rating C:1.95 kN; D2 ≈:14.8 mm; Fatigue load limit Pu:0.036 kN; Limiting speed:60000 r/min; |
230.20.0700.503 Four Contact Ball Slewing Ring 634x848x56mm | R1:60.325 mm; S:4.763 mm; N1:22.225 mm; L:349.25 mm; h:40.481 mm; ba:44.45 mm; Cap bolt, SAE grade:8; H:192.088 mm; Cap bolt:2 x 5/8-11 UNC; da:60.325 mm; |
RA8008 Cross Roller Bearing 80x96x8mm | Appropriate attachment bolt size G:0.625 in; H2:41.275 mm; da:60.325 mm; h:40.481 mm; A1:98.425 mm; Cap bolt:2 x 5/8-11 UNC; S:4.763 mm; ba:44.45 mm; PosiTrac Plus contact element:2 x B10724-37; P60°:101 kN; |
3R8-59N2E Three Row Roller, Heavy-duty Slewing Ring With Internal Gear | Cap bolt:1-8 UNC; Mass pillow block:189 kg; Da:319.999 mm; Bearing limiting speed:2600 r/min; J max.:600.075 mm; RG:3/4 NPT; End plug (suffix Y):EPR 19; Adapter sleeve assembly:SNW 36x6.5/16; J1:117.475 mm; R1:114.3 mm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
CRBH208 Cross Roller Bearing 20x36x8mm Video