| No. | Brand | C | K | A | T | a | G | h | b |
| 4] | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| RE529319 | John Deere | - | - | - | - | - | - | - | - |
| 4LE1/4LE2 | - | - | - | - | - | - | - | - | - |
| 9.0mm | - | - | - | - | - | - | - | - | - |
| 6008-2RZ | - | 13.5 mm | - | - | - | - | - | - | - |
| M2X146B | - | - | - | - | - | - | - | - | - |
| 1.5D | - | - | - | - | - | - | - | - | - |
| 360 | NTN | - | - | - | - | - | - | - | 16.7 mm |
| 6202LLUC3 | NTN | - | - | - | - | - | Tr 360x5 | - | - |
| DC2 | - | 488 mm | 9 mm | - | - | - | - | - | 16.7 mm |
| 330B | INA | - | - | - | - | - | Tr 240x4 | 10 mm | 20 mm |
| 250 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MSK071E-0300-NN-M1-UG1 | Rexroth | - | - | - | - | - | - | - | - |
| K3V112DT | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| SK200-3 | - | - | - | - | - | - | - | - | - |
| TM2419+ | - | - | - | - | - | - | - | - | - |
| 1975-1979 | Timken | - | - | - | - | - | - | - | - |
| 2201 | - | - | - | - | - | - | - | - | - |
| 5X | - | - | - | - | - | - | - | - | - |
| 311B | - | - | - | - | - | - | - | - | - |
| L6-43E9Z Four-point Contact Ball Slewing Rings With External Gear | J max.:247.65 mm; PG:1/8 NPT; H:161.925 mm; Bearing:22215 E; Stabilizing ring:SR-15-0; S:3.175 mm; Max. speed for PosiTrac Plus seal:1450 r/min; A2:120.65 mm; Da:130 mm; P150°:25.4 kN; |
| RB5013 Crossed Roller Bearings 50*80*13mm | R1:65.088 mm; P150°:48 kN; Stabilizing ring:2 x 38151-24; Mass pillow block:39 kg; Bearing:23024 CCK/W33; da:101.6 mm; R2:30.163 mm; Cap bolt recommended tightening torque:298.3 N·m; Ca:55.804 mm; J1:60.325 mm; |
| RK6-22E1Z Heavy Duty Slewing Ring Bearing With External Gear | with cylindrical bore:1 200 min-1; Static (Cor):8.3 mm; d:150 mm; D:250 mm; Dynamic (Cr):4.5 mm; rs (min):2.1 mm; Pu:711 kN; Grease:1130 kN; B:80 mm; Oil:111.930 kN; |
| Produce CRB7013 Crossed Roller Bearing，CRB7013 Bearing Size70X100x13mm | Q120°:2860 kN; J6:770 mm; Initial grease fill, 20%:4.1 kg; bb:115.5 mm; H:591 mm; A1:310 mm; N:50 mm; P0°:4800 kN; L:830 mm; Cap bolt, rec. tightening torque:400 N·m; |
| CRBF 2012 AT Crossed Roller Slewing Bearings 20x70x12mm With Mounting Hole | d:110.000 mm; Fillet Radius ra:2.50 mm; B:150.00 mm; Angle Third:40 º; Basic Dynamic Radial Load Rating 15 B Bearing C2:255000 N; Fillet Radius rb:1.00 mm; D:240.0000 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating 40 AA Pair C1:436000 N; Grease Speed Rating n1:2200 rpm; |
| JXR652050 Cross Tapered Roller Bearing 310x425x45mm | P180°:72.5 kN; J1:69.85 mm; Adapter sleeve assembly:SNW 3026x4.3/8; A1:120.65 mm; H2:52.388 mm; N1:24.209 mm; Mass pillow block:50.8 kg; R2:31.75 mm; P120°:66.7 kN; Cap bolt recommended tightening torque:298.3 N·m; |
| 230.20.0800.503 Four Contact Ball Slewing Ring 734x948x56mm | D:360 mm; with tapered bore:1 000 min-1; B:118 mm; Static (Cor):11.1 mm; Oil:268.390 kN; Pu:1690 kN; d:240 mm; rs (min):3 mm; with cylindrical bore:800 min-1; Grease:3060 kN; |
| 230.20.0600.013 Four Contact Ball Slewing Ring 534x748x56mm | Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:15600 N; Basic Dynamic Radial Load Rating C:39000 N; B:25.00 mm; D:130.0000 mm; Grease Speed Rating n1:4800 rpm; d:75.000 mm; |
| Slewing Ring For Excavator KOBELCO SK100 IV, Part Number:24100N7529F1 | Hydraulic nut:HMVC 36E; B1:163.728 mm; Threads per inch:8; G:179.476 mm; Lock nut:AN 36; d1:161.925 mm; Mass adapter sleeve assembly:10 kg; B:28.042 mm; B4:28.042 mm; d:180 mm; |
| DH280 Slewing Bearing | Stabilizing ring:2 x SR-1617; da:71.438 mm; A2:171.45 mm; N1:22.225 mm; H:222.25 mm; R1:66.675 mm; Initial grease fill:365.71 g; P150°:35.6 kN; H1:114.3 mm; PG:1/4 NPT; |
CRBH258 Cross Roller Bearing 25x41x8mm Video