| LQ40FU0004F1 Swing Bearing For KOBELCO SK250LC-6E Excavator | Stabilizing ring:SR-18-15; A1:98.425 mm; Housing:SAFS 518; End plug (suffix Y):EPR 11; Adapter sleeve assembly:SNW 18x3.1/4; Labyrinth ring:2 x LOR 187; PosiTrac Plus contact element:2 x B10724-188; Cap bolt recommended tightening torque:149.1 N·m; P120°:53.4 kN; P180°:58.7 kN; |
| RB60040 Bearing 600*700*40mm | rb max.:1.5 mm; Basic dynamic load rating C:108 kN; Limiting value e:0.2; Limiting speed:11000 r/min; r3,4 min.:1.5 mm; D1 ≈:95.65 mm; Reference speed:6700 r/min; Axial load factor Y:0.6; D:110 mm; r1,2 min.:1.5 mm; |
| VSU200844 Slewing Bearing / Four Point Contact Bearing 772x916x56mm | Weight:0.597 kg; B:14 mm; Static (Cor):31.600 kN; Pu:1.419 kN; Da:121 max; rs:0.6 mm; da:84 min; ra:0.6 max; d:80 mm; Bearing designation:16016 ; |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter 1787/1075KM Slewing Bearing | ra max.:5 mm; Axial load factor Y:0.6; Basic dynamic load rating C:1510 kN; s max.:11.5 mm; d:1060 mm; Mass bearing:259 kg; Da min.:1228 mm; Fatigue load limit Pu:220 kN; Calculation factor kr:0; D:1280 mm; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
| RB14025/ Crossed Roller Bearings (140x200x25mm) | d:17.000 mm; Basic Static Radial Load Rating Co:4500 N; Oil Speed Rating Open/Shielded n2:20000 rpm; Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:17000 rpm; Basic Dynamic Radial Load Rating C:9560 N; B:17.46 mm; D:40.0000 mm; Sealed Speed Rating n3:12000 rpm; Fillet Radius ra:0.64 mm; |
| YRTSM325 Rotary Table Bearing 325x450x60mm | U:30 mm; Reference speed:6000 r/min; Basic static load rating C0:140 kN; Basic dynamic load rating C:50.1 kN; Limiting speed:6700 r/min; Fatigue load limit Pu:17.6 kN; Mass needle roller and cage assembly:0.11 kg; Fw:70 mm; Ew:76 mm; |
| A18-60P1B Four Point Contact Ball Slewing Bearings SLEWING RINGS | Lock nut:HM 3180; d1:380 mm; d3:520 mm; G2:M 6; Locking device:MS 3184-80; d:400 mm; B5:82 mm; Mass adapter sleeve assembly:87 kg; B1:328 mm; A:4 mm; |
| XU160260 Cross Roller Bearing 191x329x46mm | P150°:120 kN; N1:28.575 mm; H2:66.675 mm; Labyrinth ring:2 x LOR 153; Housing:SAFS 038 KA; P180°:145 kN; J max.:488.95 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; R1:104.775 mm; |
| VLI301255N Four Contact Ball Slewing Ring 1110x1400x90mm | Initial grease fill:181.44 g; J min.:295.275 mm; Cap bolt recommended tightening torque:203.4 N·m; A1:111.125 mm; Ca:55.804 mm; Bearing:23024 CCK/W33; Adapter sleeve assembly:SNW 3024x4.1/4; P180°:48.9 kN; Housing:FSAF 024 KA; R2:30.163 mm; |
| 230.20.0800.013 Four Contact Ball Slewing Ring 734x948x56mm | Basic Static Radial Load Rating Co:600000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1500 rpm; B:65.00 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2000 rpm; D:400.0000 mm; d:220.000 mm; Basic Dynamic Radial Load Rating C:403000 N; |