No. | Brand | C | K | A | T | a | G | h | b |
100% | - | - | - | - | - | - | - | - | - |
A10VD43 | Rexroth | - | - | - | - | - | - | - | - |
40X74X40 | - | - | - | - | - | 3 mm | - | 23 mm | - |
1-14141692-0 | - | - | - | - | - | - | - | - | - |
5000 | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | 11 mm |
2x6x3mm | - | - | - | - | - | - | - | - | - |
(8-7250CH) | - | - | - | - | - | - | - | - | - |
N43W | - | - | - | - | - | - | - | - | - |
6076 | - | - | - | - | - | - | - | - | - |
4x | - | 220 mm | - | - | - | - | - | - | - |
BRS-11 | - | - | - | - | - | - | - | - | - |
27Pcs | - | - | - | - | - | - | - | - | - |
r134a | - | - | - | - | - | - | 139.624 mm | - | - |
14 | - | - | - | - | - | 40 mm | - | - | - |
3076 | INA | - | - | - | - | - | - | - | - |
1973-1994 | koyo | - | - | - | - | - | M 45x1.5 | - | 6 mm |
B2120070 | Rollway | - | - | - | - | - | - | - | - |
A14LX3 | Parker | - | - | - | - | - | - | - | - |
A2F | - | - | - | 114.3 mm | - | - | - | - | - |
20lb | - | - | - | - | - | - | - | - | - |
220g | - | 14 mm | - | - | - | - | - | - | - |
New10pcs | - | - | - | - | - | - | - | - | - |
YRT120 Rotary Table Bearings (120x210x40mm) Turntable Bearing | l4 max.:219 mm; d4 ≈:70 mm; Basic dynamic load rating C:440 kN; l5 ≈:30 mm; α:6 °; Basic static load rating C0:270 kN; h1:160 mm; d:50 mm; r1 min.:0.6 mm; Specific dynamic load factor K:300 N/mm²; |
CRBF3515 AT Crossed Roller Slewing Rings 35x95x15mm With Mounting Hole | D1:70 mm; Permissible sliding velocity v min.:0 m/s; D:60 mm; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; B1:6 mm; Mass bushing:0.28 kg; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; Coefficient of friction µ min.:0.08; |
XSA141094-N Crossed Roller Bearings 1024x1198.1x56mm | D:90.0000 mm; d:40.000 mm; Speed Rating-Open and Shielded-Oil OSO:7500 rpm; Fillet Radius ra:1.50 mm; Speed Rating-Open and Shielded-Grease OSG:6200 rpm; Basic Radial Load Rating-Static SCO:36000 N; Accessories:300WI Filling Notch; Width - Inner Ring B1:36.51 mm; Basic Radial Load Rating-Dynamic DC:46800 N; Diameter E:54.8 mm; |
11-16 0188/2-01707 Four-point Contact Ball Slewing Bearing With External Gear | Calculation factor kr:0.025; Mass bearing:0.018 kg; Fatigue load limit Pu:0.083 kN; r1,2 min.:0.3 mm; d:10 mm; B:8 mm; Basic static load rating C0:1.96 kN; ra max.:0.3 mm; D:26 mm; Da max.:24 mm; |
XU160260 Cross Roller Bearing 191x329x46mm | P150°:120 kN; N1:28.575 mm; H2:66.675 mm; Labyrinth ring:2 x LOR 153; Housing:SAFS 038 KA; P180°:145 kN; J max.:488.95 mm; Cap bolt recommended tightening torque:813.5 N·m; PG:1/4 NPT; R1:104.775 mm; |
HS6-37N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | Cap bolt recommended tightening torque:203.4 N·m; P150°:80.1 kN; Ca:82.804 mm; R2:39.688 mm; PosiTrac Plus contact element:2 x B10724-125; R1:95.25 mm; Adapter sleeve assembly:SNW 30x5.1/4; Eye bolt:2 x 3/8-16 UNC; P60°:230 kN; Da:269.999 mm; |
RE11015 Cross Roller Bearing 110x145x15mm | rs (min):4 mm; r1s (min):4 mm; s:2.5 mm; b1:24 mm; d2:90 mm; Dynamic (Ca):391 kN; F:124 mm; B:54 mm; E:mm; Pu:43.000 kN; |
280.30.0900.013 Four Contact Ball Slewing Ring 805x1100x90mm | Mass inner ring:0.11 kg; r, r1,2 min.:1 mm; B:20 mm; d:40 mm; F:50 mm; |
Excavator Slewing Ring For PC240LC-7K, Part Number:206-25-00301 | Sealed Speed Rating n3:2400 rpm; d:105.000 mm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:4000 rpm; Basic Static Radial Load Rating Co:65500 N; B:26.00 mm; Basic Dynamic Radial Load Rating C:79300 N; Oil Speed Rating Open/Shielded n2:4800 rpm; |
MTO-065T Heavy Duty Slewing Ring Bearing |
17 mm x 47 mm x 14 mm MTE-540T Heavy Duty Slewing Ring Bearing Video
6303-2RSR FAG Sealed Deep Groove Ball Bearing
6303-2RSR FAG Sealed Deep Groove Ball Bearing 17x47x14mm - Single row deep groove ball bearing with two rubber seals 17mm inside x 47mm outside x
FAG 6303-2RSR-C3 Deep Groove Ball Bearing, Single Row
FAG 6303-2RSR-C3 Deep Groove Ball Bearing, Single Row, Double Sealed, Steel Cage, C3 Clearance, Metric, 17mm ID, 47mm OD, 14mm Width, 11000 rpm
6303 FAG Open Deep Groove Ball Bearing 17x47x14mm
6303 FAG Open Deep Groove Ball Bearing 17x47x14mm - Single row deep groove ball bearing 17mm inside x 47mm outside x 14mm width, also know as
FAG (Schaeffler) - 6303-2RSR-L038 - Motion Industries
Buy FAG (Schaeffler) Radial & Deep Groove Ball Bearings 6303-2RSR-L038 direct from Motion Industries. Your proven service leader with reliable delivery
FAG | 6303-RSR | Deep Groove Ball Bearing | Applied
Shop FAG 6303-RSR at Applied.com, which includes; Deep Groove Bearing Type, 17 mm Inner Diameter, 47 mm Outer Diameter, 14 mm Width
FAG | 6303-2RSR-L038-C3 | Medium 6300 Series Deep
Shop FAG 6303-2RSR-L038-C3 at Applied.com, which includes; Deep Groove Bearing Type, 17 mm Inner Diameter, 47 mm Outer Diameter, 14 mm Width
Deep groove ball bearings - 6303-2RSR - medias
Deep groove ball bearings 6303-2RSR, main dimensions to DIN 625-1,. Radial load Axial load in one direction Axial load in two directions Sealed on both sides