No. | Brand | C | K | A | T | a | G | h | b |
D31VW11C4NJCF56 | Parker | - | - | - | - | - | - | - | - |
RD400E/F | NTN | - | - | - | - | - | - | - | - |
B500x10m | - | - | - | - | - | - | - | - | - |
(NU426M) | - | - | - | - | - | - | - | - | - |
4X8 | - | - | - | - | - | - | Tr 420x5 | - | - |
508-607 | SKF | - | - | - | - | - | - | - | - |
12mm-25mm | - | - | - | - | - | - | - | - | - |
72400 | - | - | - | - | - | - | - | - | - |
NU238 | NSK | - | - | - | - | - | - | - | - |
12mm-18mm | - | - | - | - | - | - | - | - | - |
+020 | - | - | - | - | - | - | - | - | - |
1985-2002 | Timken | - | - | - | - | - | Tr 220x4 | - | 22.3 mm |
1000 | fag | - | - | - | - | - | - | - | - |
A2f107 | INA | - | - | - | - | 6 mm | - | - | - |
0.8 | - | 27 mm | - | - | - | 51.517 mm | - | - | - |
33122JR | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
1973-up | - | - | - | - | - | - | - | - | 4.2 mm |
3500W | - | - | - | - | - | - | - | - | - |
NKX30 | SKF | - | - | - | - | - | - | - | - |
ST25-UU | thk | - | - | - | - | - | - | - | - |
PC35 | - | - | - | - | - | - | - | - | - |
Bearing,2-Bolt,Ball,25mm | NTN | - | - | - | - | - | - | - | - |
6200C3 | SKF | - | - | - | - | - | - | - | - |
20.5% | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
478981 Slewing Bearing | P150°:145 kN; S:4.763 mm; da:201.613 mm; Adapter sleeve assembly:SNW 44x7.15/16; Appropriate attachment bolt size G:1.5 in; H:474.663 mm; J max.:708.025 mm; Bearing:22244 CCK/W33; P90°:254 kN; PG:1/4 NPT; |
NRXT30025DD Crossed Roller Bearing 300x360x25mm | Oil Speed Rating n2:3400 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; d:105.000 mm; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:182000 N; Fillet Radius ra:2.50 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating n1:2800 rpm; D:225.0000 mm; Sealed Speed Rating n3:2000 rpm; |
XU050077 Crossed Roller Slewing Ring Slewing Bearing | P120°:72.5 kN; L:419.1 mm; Max. speed for PosiTrac Plus seal:1450 r/min; J1:69.85 mm; Cap bolt, SAE grade:5; Stabilizing ring:SR-24-20; J max.:368.3 mm; Cap bolt recommended tightening torque:400 N·m; Initial grease fill:379.89 g; da:101.6 mm; |
NRXT7013DD/ Crossed Roller Bearings (70x100x13mm) Industrial Robots Bearing | Calculation factor A:0.00143; Calculation factor Y2:1.07; Da max.:45 mm; r1,2 min.:1.1 mm; Calculation factor X:0.6; Basic static load rating C0:21.6 kN; Calculation factor Y0:0.58; b:4.5 mm; a:25 mm; Fatigue load limit Pu:0.93 kN; |
A9-24P2 Four Point Contact Ball Slewing Bearings SLEWING RINGS | R2:37.306 mm; P180°:133 kN; Initial grease fill:878.85 g; S:4.763 mm; Cap bolt recommended tightening torque:1220 N·m; Cap bolt, SAE grade:8; L:628.65 mm; h:54.769 mm; RG:3/4 NPT; PG:1/4 NPT; |
CAT324D Slewing Bearing | Mass housing:709 kg; N4 max.:35 mm; ATS:470 mm; N:60 mm; End cover:ETS 92; P0°:7600 kN; ba min.:202 mm; bc:243.5 mm; Initial grease fill, 20%:8.9 kg; P55°:9600 kN; |
VLU200944 Four Contact Ball Slewing Ring 834x1048x56mm | d1:79 mm; d:65 mm; d2:92 mm; M:62.5 mm; f:8 mm; B:1.5 mm; Mass lock washer:0.03 kg; |
YC135 Slewing Bearing | α:2 °; Da max.:596 mm; r1 min.:1.5 mm; M:10 mm; Specific static load factor K0:120 N/mm²; b:27 mm; rb max.:4 mm; Mass plain bearing:360 kg; d:440 mm; Sealing solution:-; |
China Wind Power Slewing Bearing 013.35.2000.03 Wind Turbine Slewing Bearing | ba:25.4 mm; Bearing:1309 EKTN9; Contact seal:2 x B9784-12; P150°:12 kN; P180°:14.7 kN; N1:19.05 mm; Cap bolt recommended tightening torque:149.1 N·m; Ventilation fitting:38174-12; Ca:45.796 mm; RG:1/8 NPT; |
121.50.4500 Slewing Bearing | G:Tr 600x6; Calculation factor e:0.22; K:12 mm; b:22.3 mm; da min.:573 mm; D:820 mm; Da max.:797 mm; d2 ≈:646 mm; d1:530 mm; Mass bearing + sleeve:430 kg; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
MTO-122 Heavy Duty Slewing Ring Bearing Video